ClipperATS automatically starts the generator when power cuts down. It also switches your home or office load from KESC/Wapda connection to generator and from generator to KESC/WAPDA. So no more tedious exercise of manual switching over, turning ON the generator and wait in long nights until power comes back so you can put the generator OFF. Every thing will be done automatically by ClipperATS at
very affordable cost. ClipperATS's Model No.SF40, SF200, SF450, SF750 & SF1500 are fully automatic generator Control Unit. It is designed to control almost all types of generators fuel such as Natural Gas or Diesel power or petrol generators. Clipper ATS SF series can be used in Auto or Manual mode. Upon power ON Auto mode is selected by default. User can change the mode of operation to Manual by just pressing Manual button on control panel. In Auto mode, Clipper ATS does not require user intervention. It automatically turns ON the generator upon Utility/Grid power failure. And will turns the generator OFF when utility/Grid power resumes. This also includes automatic Load switch from Utility power to Generator and from Generator to Utility/Grid power; thus eliminating the need of any external change-over switch. In Manual mode Clipper ATS observes all the events such as Utility/Grid power failure, the status of Generator and Transfer relay/contactors etc. It will show the status of all events on LCD display, but it does not act upon any event by itself; rather it will wait for user to command the system by pressing appropriate button on front panel. Generator ON/OFF button, Generator START motor ON/OFF button, Load transfer change-over button.
