Anderson's Fabrication and Upfitting

Anderson's Fabrication and Upfitting Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Anderson's Fabrication and Upfitting, Texas City, TX.

A local company who provides services such as metal fabrication and welding repairs, trailer repairs and customization, automotive repairs and customizations auto accessories and much much more.

This customer was complaining of a non working heater, I diagnosed the heater core to be clogged so I replaced it with a...
02/03/2024

This customer was complaining of a non working heater, I diagnosed the heater core to be clogged so I replaced it with a factory one and now the customer has a working heater again.

Knocked out some minor repairs on this Chevy 2500 front end, it needed a new cv axle and a upper ball joint for the afte...
01/09/2024

Knocked out some minor repairs on this Chevy 2500 front end, it needed a new cv axle and a upper ball joint for the aftermarket control arm. The pitman arm and idler arm with bracket were wiped out as well and needed replacing so they got upgraded to kryptonite Products.

This jeep showed up with a no start issue as well as it needed a new clutch. Got the starting issue figured out as well ...
10/31/2023

This jeep showed up with a no start issue as well as it needed a new clutch. Got the starting issue figured out as well as replaced the clutch, throw-out bearing, and the clutch master cylinder. After disassembly I noticed the rear u-joint on the drive shaft was smaller than it was supposed to be and the transmission mount was broken. Got the correct u-joint as well as a new transmission mount installed.

Customer replaced all trailer lights and wiring with a new kit but still was having issues. Turns out he was having a ba...
10/13/2023

Customer replaced all trailer lights and wiring with a new kit but still was having issues. Turns out he was having a bad grounding issue quick fix and it's back on the road.

Replaced this Ford factory air intake with a S&B cold air intake to help this truck breath a little better
10/05/2023

Replaced this Ford factory air intake with a S&B cold air intake to help this truck breath a little better

Knocked out this 4" superlift kit on a dodge 3500 with fox 2.0 shocks and the fox 2.0 dual steering stabilizers. Upgrade...
05/08/2023

Knocked out this 4" superlift kit on a dodge 3500 with fox 2.0 shocks and the fox 2.0 dual steering stabilizers. Upgraded the factory balljoints to kryptonite balljoints as well as some new 37" toyo r/t tires to finish it off.

Just finished up installing this led mood light / underglow kit with a upgraded bluetooth controller. Also added some up...
03/13/2023

Just finished up installing this led mood light / underglow kit with a upgraded bluetooth controller. Also added some upgraded brake pads and rotors.

Rebuilt the front end on this 2012 Dodge 3500 it was wiped out. New upper and lower ball joints, new hub bearings and sp...
02/14/2023

Rebuilt the front end on this 2012 Dodge 3500 it was wiped out. New upper and lower ball joints, new hub bearings and speed sensors, new axle u-joints, and new inner and outer tie rod ends.

Installed a 4.5" rough country kit on this tundra for a little extra ground clearance. Now time for some beefier tires.
01/26/2023

Installed a 4.5" rough country kit on this tundra for a little extra ground clearance. Now time for some beefier tires.

Welded up these stall gates for a customers new animal shelter
01/14/2023

Welded up these stall gates for a customers new animal shelter

05/21/2021

Hooked this customer up with some Plash lights rgb led strips in his grill and sub grill. Also installed a 12 piece white rock light set with more lighting to come.

Address

Texas City, TX
77590

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 1pm

Website

Alerts

Be the first to know and let us send you an email when Anderson's Fabrication and Upfitting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Anderson's Fabrication and Upfitting:

Shortcuts

Share