Nuwave Laser

08/24/2026

What does 1800W of continuous-wave laser power look like?

It looks like heavy rust disappearing from a steel beam, one pass at a time. Nuwave Laser’s 1800W system delivers the sustained power needed for demanding industrial cleaning and surface-preparation jobs.

Big surface. Heavy corrosion. Serious cleaning power.

Learn more about our 1800W continuous-wave laser cleaning system: NuWaveLaser.com

08/22/2026

08/21/2026

Your powder-coated finish starts before the powder is ever sprayed.

Rust, oxides, mill scale, grease, and old coatings can introduce variability before a part reaches the booth. The NCL-3000 gives powder-coating operations high-output, media-free cleaning for steel panels, welds, edges, fixtures, and targeted rework areas.

Use it to:

• Remove surface contamination before the approved pretreatment process
• Precisely clean complex or high-value areas
• Reduce reliance on abrasive media, containment, and secondary cleanup

Built for industrial surface preparation on steel, the NCL-3000 helps coating operations move from contaminated metal to a clean surface ready for the next stage of production.

Ready to upgrade your surface preparation process?

Speak with a Nuwave Laser expert to learn how the NCL-3000 can fit your operation.

08/14/2026

We're pulling the anodizing off a set of fork lowers.

Aluminum is where this gets interesting. The finish is only a few microns thick and the metal under it is soft, so there isn't much room between taking the coating off and getting into the part. Chemical strip means running a tank and dealing with the rinse. Blasting a casting like this reworks the surface texture and packs media into every port and thread you then have to chase back out.

This is our 300W pulse laser. It fires in short bursts instead of a steady beam, so with the energy dialed in you're lifting the finish and leaving the aluminum. We masked a section so you can see exactly where it stops.

Restoration shop? Send us a message and we'll tell you straight whether the 300W fits your work.

08/11/2026

Now through August 31, every NOVAWELD laser welder is 25% off. One torch runs aluminum, stainless, carbon, brass, and copper, up to 10x faster than traditional welding methods, with less prep and less grind behind it.

Add financing and it's the lowest cost of entry we've ever offered on a NOVAWELD system.

Offer ends August 31. Message us to lock in your price.

07/24/2026

One laser cleaning machine can carry a whole service menu. ⚡

Pull rust off fleets and heavy equipment. Prep surfaces for fab shops. Lift soot and graffiti off brick. Degrease plant machinery. Restore headstones and stonework. That's the day-to-day work mobile laser cleaning businesses run on.

Thinking about starting your own? Message us and our team will walk you through the machines and which jobs each one is right for.

📍 nuwavelaser.com

07/16/2026

White paint is the hardest color to remove with a laser, and here's our new 1800W machine doing it clean.

Here's the physics. A fiber laser cleans by getting the coating to absorb its energy. White paint reflects almost all of it, up to 90%, because the titanium dioxide that makes paint white also makes it a mirror at the laser's wavelength. Darker colors soak the energy right up and strip fast. White fights back.

So when you watch this machine peel white paint off a bare wheel, the hardest color there is to remove, that's about as tough as color cleaning gets.

If it handles white, it handles your job.

👉 See the new 1,800W and what it can do: https://loom.ly/aNI13zc