Matt Makes It Happen LLC - Metalworks

Matt Makes It Happen LLC - Metalworks Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Matt Makes It Happen LLC - Metalworks, Metal Fabricator, 2453 108th Avenue, Otsego, MI.

05/24/2025

Good morning! First, I wanted to thank all of you following and engaging with my page! It has helped me get my business going.

With 6 years in metal fab, I started planning a business in April 2023. I built a shop that summer, and started Novak Metalworks LLC one year later.

I had a few jobs come in, but not many, so that fall I started a second business, Matt Makes It Happen LLC, for remodeling and construction. My dad is a self employed builder, and I grew up doing it. I figured if one business was moving slowly, I could keep an income with the other. So far, this has taken off!

Keeping both businesses operating as individual entities has proved to be an unnecessary headache, so I have decided to dissolve Novak Metalworks, and run the welding shop under Matt Makes It Happen as well. It happens to be a great catch-all name!

So if you are in need of metal fab, check me out at "Matt Makes It Happen LLC - Metalworks". And if you need remodeling and home repair, check me out at "Matt Makes It Happen LLC - Remodeling"!

Thank you all for your support.

Send a message to learn more

Got the green light on the stone bin I drew up a while back! Made to be filled from a skid steer or dump truck(if tall e...
01/03/2025

Got the green light on the stone bin I drew up a while back! Made to be filled from a skid steer or dump truck(if tall enough), and scooped from with an excavator, to prevent material loss. This one is 2.4cy, 4'x4' base, 4'x8' opening, 3' walls. Roughly 1000lbs. Customer opted to paint himself. If interested in this or other fabrication projects, send me a message! I can create custom sizes too. Shout out to on instagram.

Emergency repair! A customer has an engine driven hydraulic pump on a farm trailer. The small engine died, and the bolt ...
12/14/2024

Emergency repair! A customer has an engine driven hydraulic pump on a farm trailer. The small engine died, and the bolt mounting pattern was very different on the new one. I built this replacement mount for the new engine.

I built this 6x10 utility trailer frame for a customer. Turned out great! They are painting and decking it themselves, a...
12/13/2024

I built this 6x10 utility trailer frame for a customer. Turned out great! They are painting and decking it themselves, as well as building sides for it. I would have preferred to move the axle towards the rear as the tongue weight is a bit light, but they wanted to be able to pick it up to move it around by hand.

Customer wanted a 12in star made from rebar as a flagpole topper. These could also be made as lawn/garden stakes or simp...
12/12/2024

Customer wanted a 12in star made from rebar as a flagpole topper. These could also be made as lawn/garden stakes or simply hung from the top point on a door or wall.

Customer wanted this wrought iron handrail custom built and installed. I found matching parts to the interior railing, a...
12/11/2024

Customer wanted this wrought iron handrail custom built and installed. I found matching parts to the interior railing, and created this. If you have a custom project, send me a message!

From drawing to reality. Got a large project? I now have the capacity for it!
10/17/2024

From drawing to reality. Got a large project? I now have the capacity for it!

The stone box will weight around 1200-1500lbs. I'll need a way to move it around once tacked together to finish welding,...
10/13/2024

The stone box will weight around 1200-1500lbs. I'll need a way to move it around once tacked together to finish welding, so I desiged this gantry crane with a 2 ton capacity. If I start getting projects beyond 2 tons, I will be past the ability of this shop and will be looking for industrial space! Hope to have pictures of both welded projects up in the next couple weeks.

Address

2453 108th Avenue
Otsego, MI
49078

Telephone

+16163450295

Website

Alerts

Be the first to know and let us send you an email when Matt Makes It Happen LLC - Metalworks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Matt Makes It Happen LLC - Metalworks:

Share