Feiden's Welding Repairs

Feiden's Welding Repairs welding repair, custom welding, metal fabrication and hardfacing service

Beautiful day on the water a couple of weeks ago working on this ferry. The hinges on these access doors were crushed an...
05/26/2026

Beautiful day on the water a couple of weeks ago working on this ferry. The hinges on these access doors were crushed and broken from running tracked equipment on them over the years. We decided to put the new hinges in the center to take care of this issue. With a few modifications, it worked out great and the customer was back up and running the next day.

This little roller had a bad day. Someone forgot to drain the water out of the drum before winter. It froze and split op...
05/23/2026

This little roller had a bad day. Someone forgot to drain the water out of the drum before winter. It froze and split open almost all the way around. Luckily it broke right at the end cap so there was another layer of steel behind the crack on one side. Made it a lot easier to get a nice full pe*******on weld.

Fireplace grates made to last a lifetime. Built heavy with 1" x ½" thick steel bars. Unlike most other grates, these hav...
05/21/2026

Fireplace grates made to last a lifetime. Built heavy with 1" x ½" thick steel bars. Unlike most other grates, these have support legs in the center so they won't sag and melt away. Available in many different sizes. The ones pictured are 24" wide in the front, 20" wide in the back, and 15" deep. Message me for pricing.

A friend of mine broke an exhaust manifold bolt in the head of the dump truck motor in the background today. They tried ...
05/19/2026

A friend of mine broke an exhaust manifold bolt in the head of the dump truck motor in the background today. They tried everything to get it out. I welded a washer and nut to the end of the stud and got it out first try. Couldn't beleive it.. usually it takes a few tries. I guess they must have loosened it up for me lol. Welded this muffler bracket for him while I was there too.

Thumb install on a 160 kobelco I did this spring. Give me a call for all of your professional install, on site fabricati...
05/18/2026

Thumb install on a 160 kobelco I did this spring. Give me a call for all of your professional install, on site fabricating and repair needs.

A little crack repair project on this cat loader bucket. Just like it never happened
02/20/2026

A little crack repair project on this cat loader bucket. Just like it never happened

Last summer I got to be a part of a really cool well drilling rig project. This is the saddle the drill tower sits in. I...
02/03/2026

Last summer I got to be a part of a really cool well drilling rig project. This is the saddle the drill tower sits in. It had to be raised a few inches so the tower would clear the cab of the new truck it sits on. The old set up was kinda goofy looking and not the sturdiest so I replaced it with 3" square tube and some heavy ⅜" gusset plates. I also made the new tower guides and added the angle iron braces you see on the tower

Hydraulic cylinder repair for a good customer of mine. Made a new cover plate on site and welded that in as well. The be...
01/06/2026

Hydraulic cylinder repair for a good customer of mine. Made a new cover plate on site and welded that in as well. The bevel ended up bigger than it needed to be to get rid of the undercut from the last guy that welded it. Made for a big weld but it wont leak!

Winter is here! Give me a call or shoot me a message for all of your plow repair needs
12/02/2025

Winter is here! Give me a call or shoot me a message for all of your plow repair needs

Address

Minerva, NY
12857

Website

Alerts

Be the first to know and let us send you an email when Feiden's Welding Repairs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category