Off Grid Metalworks

Off Grid Metalworks Keeping It OG With Quality And Pride In Our Work. Mobile Welding, Custom Fabrication, Custom Gate And Fencing Applications.

See that crack in the first picture? Thats the driver upper control arm on a JL, the passenger side looked exactly like ...
06/21/2026

See that crack in the first picture? Thats the driver upper control arm on a JL, the passenger side looked exactly like it. And guess what? It's not the powdercoat. The whole joint shank is ripping away from the clevis bracket and it was ripped to about the 2 o'clock position on BOTH arm brackets.

Here's a photo of another brand for comparison.

These are an incredible safety hazard and we are very fortunate it was caught. Could you imagine if both upper arms broke at the same time? Game over, do not pass go, do not collect $200.

If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For You 🔥

Give Us A Call Or Send Us An Email TODAY!
⬇️⬇️⬇️
☎️ 303-345-0011
📧 [email protected]

Experience From Experience!

This bronco received a new PSC Motorsports hydro assist system, RPM Steering custom 1.5" aluminum draglink, OGBilt trai...
06/16/2026

This bronco received a new PSC Motorsports hydro assist system, RPM Steering custom 1.5" aluminum draglink, OGBilt trailer tie down points and a relocated spare tire that was raised 8" for better clearance on descents and climbs.

If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For You 🔥

Give Us A Call Or Send Us An Email TODAY!
⬇️⬇️⬇️
☎️ 303-345-0011
📧 [email protected]

Experience From Experience!

This little TJ came in with rust all over, a separated rear body panel and was in need of some serious love. - control ...
05/29/2026

This little TJ came in with rust all over, a separated rear body panel and was in need of some serious love.

- control arms and track bars
- front lower control arm brackets
- 2" lift springs
- 5100 shocks
- HD ball joints
- HD steering system
- Replacement rocker armor, front fenders, rear fenders and rear corner guards

If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For You 🔥

Give Us A Call Or Send Us An Email TODAY!
⬇️⬇️⬇️
☎️ 303-345-0011
📧 [email protected]

Experience From Experience!

This ol' tug boat came in for a few upgrades to prep for their start with off road recovery. - Dana 80 OX locker wired t...
05/29/2026

This ol' tug boat came in for a few upgrades to prep for their start with off road recovery.

- Dana 80 OX locker wired to a rough country switch panel
- Rock slider side steps from 2x4x.25 main structure and 1.75x.188 DOM supports and a dimpled step platform.
- Cut the corners of the bed to remove the wide angled contact points.
- Welded some hitch supports
- Built a spare tire mount on the boom.
- Fixed the front bumper to be able to fit a badlands 12k winch
- Repaired the cracked frame on the race Jeep
- Added some OGBilt tie down mounts to the trailer because the original setup had the straps wrapped around the tires.

Finally starting to get closer to caught back up with work! Thank you to everyone that has been waiting Patiently!

beef for this new super duty. If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For You 🔥G...
05/16/2026

beef for this new super duty.

If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For You 🔥

Give Us A Call Or Send Us An Email TODAY!
⬇️⬇️⬇️
☎️ 303-345-0011
📧 [email protected]

Experience From Experience!

PPE transmission pan for this Bronco. If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For...
05/16/2026

PPE transmission pan for this Bronco.

If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For You 🔥

Give Us A Call Or Send Us An Email TODAY!
⬇️⬇️⬇️
☎️ 303-345-0011
📧 [email protected]

Experience From Experience!

Fresh rear bumper and 2.5 shocks front and rear to replace the previous pintop King shocks. If You Have a Jeep, Truck,...
05/16/2026

Fresh rear bumper and 2.5 shocks front and rear to replace the previous pintop King shocks.

If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For You 🔥

Give Us A Call Or Send Us An Email TODAY!
⬇️⬇️⬇️
☎️ 303-345-0011
📧 [email protected]

Experience From Experience!

Guess who's back, back again, back, tell a friend!New PSC power steering pump and some electrical fixes. If You Have a ...
05/16/2026

Guess who's back, back again, back, tell a friend!
New PSC power steering pump and some electrical fixes.

If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For You 🔥

Give Us A Call Or Send Us An Email TODAY!
⬇️⬇️⬇️
☎️ 303-345-0011
📧 [email protected]

Experience From Experience!

I wanted to take a moment and thank all of those that have been keeping me crazy busy over the past year! I also wanted ...
04/27/2026

I wanted to take a moment and thank all of those that have been keeping me crazy busy over the past year! I also wanted to thank those that have been patiently waiting their turn to get their build started or finished.

This excursion build has taken substantially longer than anticipated and it has caused a snowball effect of delays. But we are happily over the hump and are getting close to getting this build finished!

Jeep came in with a popping in her steering. So we swapped the single sheer high steer setup to a double sheer to allev...
04/16/2026

Jeep came in with a popping in her steering. So we swapped the single sheer high steer setup to a double sheer to alleviate any cantilevered stress on the bolt.

We also went through all her headlight wiring and got her headlights, halo rings, and rock lights back to working properly.

If You Have a Jeep, Truck, 4x4 Or a Welding Job Needing Built, We Are The Shop For You 🔥

Give Us A Call Or Send Us An Email TODAY!
⬇️⬇️⬇️
☎️ 303-345-0011
📧 [email protected]

Experience From Experience!

Address

Franktown, CO

Opening Hours

Monday 9:30am - 4pm
Tuesday 9am - 4pm
Wednesday 9am - 4pm
Thursday 9am - 4pm
Friday 9am - 4pm

Website

Alerts

Be the first to know and let us send you an email when Off Grid Metalworks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category