Brad's Welding & Repair

  • Home
  • Brad's Welding & Repair

Brad's Welding & Repair Welding/fabrication/Diesel Repair

Another New Holland skidsteer with electrical issues. Intermediate loss of ground to ecm and relay circuits. Loader woul...
01/01/2024

Another New Holland skidsteer with electrical issues. Intermediate loss of ground to ecm and relay circuits. Loader wouldn't raise or lower, bucket wouldn't move, and engine would miss and stall.

This is the only part of this job I got a picture of, I did brakes, wheel seals, and some welding. This is a N14 celect ...
31/12/2023

This is the only part of this job I got a picture of, I did brakes, wheel seals, and some welding. This is a N14 celect in a 379 Peterbilt, ran the overhead and re-set the jakes.

Another rust repair on a paving machine, didn't think to get a before picture. Turned out pretty good, also did king pin...
31/12/2023

Another rust repair on a paving machine, didn't think to get a before picture. Turned out pretty good, also did king pins, wheel seals, hubs, and tie rod ends.

This is a interior handrail job that I just finished up, turned out pretty slick.
29/10/2023

This is a interior handrail job that I just finished up, turned out pretty slick.

Once again, it's been awhile since I posted anything. It's truly been a blessing staying as busy as I have, thanks every...
29/10/2023

Once again, it's been awhile since I posted anything. It's truly been a blessing staying as busy as I have, thanks everyone for the likes and shares. Here is some pictures of random work that I remembered to take pictures of.

Been awhile since I posted anything, I figured I would post a few of the job today.
29/07/2023

Been awhile since I posted anything, I figured I would post a few of the job today.

A few pictures of a on-going project. We're installing a flat bed and adding a plate for a gooseneck ball and a plate fo...
26/03/2023

A few pictures of a on-going project. We're installing a flat bed and adding a plate for a gooseneck ball and a plate for a pintle hook and reese hitch. It should make a pretty nice setup.

Finished up the welding and fab work on this yesterday, it's ready to be shipped back for re-assembly.
26/03/2023

Finished up the welding and fab work on this yesterday, it's ready to be shipped back for re-assembly.

Got home this evening and had all this waiting on me thanks to Mountaineer Diesel. Fass 165gph titanium lift pump and a ...
22/03/2023

Got home this evening and had all this waiting on me thanks to Mountaineer Diesel. Fass 165gph titanium lift pump and a vp44 injection pump.

Made alot of progress today, got everything out and cleaned up. Then later this evening started putting new steel back i...
22/03/2023

Made alot of progress today, got everything out and cleaned up. Then later this evening started putting new steel back in..

Started on this project today, definitely time for some new metal.
21/03/2023

Started on this project today, definitely time for some new metal.

A little project on Saturday.
21/03/2023

A little project on Saturday.

Address

WV
24938

Telephone

+13046612475

Website

Alerts

Be the first to know and let us send you an email when Brad's Welding & Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Brad's Welding & Repair:

Shortcuts

  • Want your business to be the top-listed Equipment Service?

Share