HERO Energy Solutions

08/13/2026

https://www.amazon.com/dp/B0H7SX4Z96

08/13/2026

"We've noticed a significant improvement in comfort" - Chris, Dallas, TX.

Much of this attic was already at code-level insulation.

So why add more of the same? More inches slow heat down. They don't catch it.

SHIELD lays over what's already there and soaks up the attic's heat before it reaches the rooms below.

07/22/2026

Attics are hot. SHIELD is not.

On Tuesday, this Dallas attic hit 138° — and only 113° got past SHIELD. Combined with the existing insulation, this home held 75° all day long.

We have Certified Contractors all across the South. Message us to be connected with one of our trained professionals.

07/10/2026

Sandpiper Lane, Dallas — July 6. The attic hit 133° at 3 PM. Under SHIELD, the peak was 24° cooler — 109° is all that reached the insulation below.
Laid over the existing insulation, same crew and same day as a top-off.

07/02/2026

Most vents have a separate mesh behind the louvers, and over the years, the attic's suction packs the mesh with dust and lint until the house can't pull air anymore. Hot upstairs rooms usually start right here.

Soffit Shark is molded as one seamless piece — louvers and screen together, nothing bolted on, no gap for debris to pack into. Screws into the same opening, paints to match the house, and comes with a limited lifetime warranty. Made in the USA.

Grab it on Amazon: https://www.amazon.com/dp/B0H6151GPH

Your attic was meant to breathe. The vents under your eaves are your attic's air intake. Over the years, standard aluminum and plastic vents clog from the inside as dust, pollen, and blown-in insulation pack into the gap behind a separate screen. A starved attic runs hotter, ages your shingles, a...

07/02/2026

SHIELD going into a vented attic —

SHIELD is insulation for vented attics that absorbs the attic's heat. Regular insulation resists heat all day; SHIELD soaks up the afternoon peak and releases it as the attic cools overnight. The attic runs cooler and holds steadier.

No tear-out, nothing conditioned, no added inches.

06/30/2026

Making attics that perform. Our solutions attack the attic from both sides — air in with Soffit Shark, heat managed with SHIELD.

06/24/2026

Charlotte, NC. This attic already had cellulose — we didn't touch it. SHIELD lays right over the top: a mineral-based insulation that absorbs the day's heat before it ever loads the insulation below. No tear-out, nothing conditioned, no added inches — the attic runs cooler and holds steady. Ask us for our field data.

05/01/2026

Nobody tells you this…
Your soffits are killing your home’s comfort. Your attic can’t breathe.

Fix the intake → fix the heat.
That’s what Soffit Shark™ does.

Comment “SHARK” to learn more.

04/29/2026

Introducing Soffit Shark™

The cleanest way to fix attic airflow and temperature issues in your home.

Built to breathe. Built to last. Made in USA. 🇺🇸

Comment “Shark” to see if your home qualifies for Soffit Shark™

www.heroenergy.us/