shawweldingandfab

shawweldingandfab North Texas
Mobile Welding
• Commercial & Residential
• Ranch Welding Projects
• Structural, Fences, & Equipment Repair

First 3 pictures are current pictures of a patio cover I did for a customer after they decorated, the last picture is fr...
06/17/2026

First 3 pictures are current pictures of a patio cover I did for a customer after they decorated, the last picture is from 2 months ago when I built it. If you’re wanting a new patio cover or to replace that old wood pergola with a lifetime solution shoot me a dm and I’ll get you taken care of!

Got this privacy gate and fence all fastened up! The whole fence is 8’ tall with a 15’ sliding gate. I’ve got two pairs ...
05/27/2026

Got this privacy gate and fence all fastened up! The whole fence is 8’ tall with a 15’ sliding gate. I’ve got two pairs of guide rollers at the top and 2 4” cast iron wheels on bottom that allow it to open and close with ease. I also have a 4’ man gate on the left side with a door handle/dead bolt combo.

Welded up a slick break away roping box. Made it all out of 2 3/8 .40 wall pipe. I squared up my string lines to the chu...
04/24/2026

Welded up a slick break away roping box. Made it all out of 2 3/8 .40 wall pipe. I squared up my string lines to the chute, set posts, cut everything and pieced it together. Me and the customer drew it up the night before and I built it the next day. Quick turnaround.

First Green house I’ve ever built. This building was actually an existing falling apart barn on this property. I took ev...
04/09/2026

First Green house I’ve ever built. This building was actually an existing falling apart barn on this property. I took every single old sheet off of it, cut a bunch of purlin out then added a bunch back. Also cut off some big non operable barn doors that were on it. After I got all the new metal framing on I re-sheeted and trimmed out the whole thing and added a 4’ wide man door. First clear roof I’ve ever done as well. Glad to have it done.

Patio cover action. 22’x20’ patio cover with a gutter on the front and trimmed all the way around. I also added a gutter...
04/07/2026

Patio cover action. 22’x20’ patio cover with a gutter on the front and trimmed all the way around. I also added a gutter to the house to keep water drilling off the roof to the patio.

Finished up this 5’ tall back yard fence. The bottom and top rail are 2 3/8 drill pipe and the boards are recycled lumbe...
11/27/2025

Finished up this 5’ tall back yard fence. The bottom and top rail are 2 3/8 drill pipe and the boards are recycled lumber from old telephone poles, most people call them creosote boards. May not look like it but there was a lot of time spent welding on this job, mainly welding the strap up that holds the boards in.

10/21/2025

Went up to Colorado to check out a big job that needs to be done on my buddies family cabin. I’ll be putting oxidized metal siding and trim over the logs on the exterior walls and building some custom stainless steel cable guard railing to replace the wore out pine guard rail that is currently in place. Once the snow clears up it will be game on.

10/13/2025

Fabricated some custom guard rails for a hub city office building here in Lubbock. They came out pretty dang good. I don’t do many interior design type of projects so this was a cool one.

I extended a backyard patio cover, came out pretty dang good. You can tell which part I extended because it is slightly ...
10/01/2025

I extended a backyard patio cover, came out pretty dang good. You can tell which part I extended because it is slightly shorter so that could keep the same 4/12 pitch, but still clear the stone wall. I put gutters on the front side with one down spout.

Built a catwalk/platform for these A/C units. The units were causing too much vibration and noise sitting right on the r...
09/28/2025

Built a catwalk/platform for these A/C units. The units were causing too much vibration and noise sitting right on the roof above the living area in the house. Building the platform helps with the noise/vibration issue while still making it easy for a technician to work on them in the future.

Address

Dallas, TX

Telephone

+12146865950

Website

Alerts

Be the first to know and let us send you an email when shawweldingandfab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to shawweldingandfab:

Shortcuts

Share