KTEC 冠德國際科技, 中和區中板路23號9樓, Xinbei (2026)

13/08/2026

📰 產品應用｜3D 列印機

3D 列印一印就是數十小時，中途不能斷電。加熱床要大電流持續加熱，步進馬達要精準走位，控制板不能有一次電壓漂移——只要電源出一次狀況，整件成品和所有工時就全部報廢。

KTEC 的 KED-150W 與 KEC-200W 就是為這種長時間運轉而設計。兩款輸出電壓都可依機型選配，從加熱床、馬達驅動到整機主電源都能對應。KED-150W 還內建 Remote on／off 與 TRIM 輸出微調，讓控制板可以直接控制電源開關、依加熱曲線微調輸出電壓。

兩款皆以醫療電氣標準設計，具 2×MOPP 絕緣，並取得 UL 62368-1／UL 60601-1 認證。其中 KEC-200W 效率高達 95%、MTBF 達 1,000K 小時，長時間列印更安心。

📦 產品資訊｜

🔹 產品型號｜KED-150W
規格｜150W ｜12V／24V／48V｜12.5A Max

🔹 產品型號｜KEC-200W
規格｜200W｜12-48V｜4.16-16.66A

⭐ 產品亮點
高效率、長壽命： KEC-200W 效率達 95%、MTBF 1,000K 小時；KED-150W 效率達 93%。
輸出電壓彈性：多段電壓選配，對應加熱床、馬達與控制板的不同需求。
醫療級安全規格：具 2×MOPP 絕緣，通過 UL 62368-1／UL 60601-1 與 IEC/CB 認證。
完善安全保護：內建過電壓（OVP）、過電流（OCP）、短路（SCP）及過溫保護（OTP）。
KTEC 將持續以專業的電源技術與製造實力，支援 3D 列印設備的創新應用，為每一層精準堆疊提供穩定、安全且值得信賴的電力支持。

KTEC 將持續以專業的電源技術與製造實力，支援 3D 列印設備的創新應用，為每一層精準堆疊提供穩定、安全且值得信賴的電力支持。
💳 歡迎與我們聯繫，一起開發更高效、更可靠的電源產品。
👉 https://www.twktec.com/

📰 Product Application｜3D Printers

A 3D print job runs for dozens of hours, and it cannot lose power halfway. The heated bed draws high continuous current, stepper motors must hold precise positioning, and the control board cannot tolerate a single voltage drift. One power failure, and the whole part—and every hour invested in it—is scrap.

KTEC's KED-150W and KEC-200W are designed for exactly this kind of long-duration operation. Output voltage is selectable by model on both units, covering everything from the heated bed and motor drives to the printer's main supply. The KED-150W also features Remote on/off and TRIM output adjustment, letting the control board manage power sequencing directly and fine-tune output voltage to the heating profile.

Both were engineered to medical electrical standards with 2×MOPP insulation, certified to UL 62368-1 / UL 60601-1. The KEC-200W reaches up to 95% efficiency with an MTBF of 1,000K hours—reassurance that matters on a long print.

📦 Product Information
🔹 Model｜KED-150W
Spec｜150W｜12V / 24V / 48V｜12.5A Max

🔹 Model｜KEC-200W
Spec｜200W｜12-48V｜4.16-16.66A

⭐ Highlights
High Efficiency, Long Life: KEC-200W delivers up to 95% efficiency and 1,000K-hour MTBF; KED-150W reaches 93%.
Flexible Output Voltage: Multiple selectable rails to match heated bed, motor and control board requirements.
Medical-Grade Safety: 2×MOPP insulation, certified to UL 62368-1 / UL 60601-1 and IEC/CB.

Comprehensive Protection: Built-in over-voltage (OVP), over-current (OCP), short-circuit (SCP) and over-temperature (OTP) protection.
KTEC will continue to leverage its professional power technology and manufacturing expertise to support innovation in 3D printing equipment, delivering stable, reliable, and trustworthy power for every precisely deposited layer.

💳 Contact us to develop more efficient and more reliable power solutions together.
👉 https://www.twktec.com/

16/07/2026

📰 產品應用｜藍芽音響

好聲音，從乾淨的電開始。藍芽音響在追求更小的體積、更沉的低頻與更長的續航時，最容易被忽略、卻最關鍵的，往往是那顆看不見的電源。電源一旦帶有紋波或雜訊，就可能化為背景嘶聲、削弱動態，讓再好的單體也發揮不出實力。

在供電形式上，藍芽音響大致分成兩條路線：迷你與入門機種以固定 5V 直接供電，追求輕巧與成本；中高階與可攜機種則走 USB-C PD，一條線同時滿足充電與快充。KTEC 冠德國際科技的產品線正好橫跨這兩端——KSA-5W 提供純淨穩定的 5V，KSA-35P 則以 5～20V 多段 PD 對應更高功率與通用充電需求。

兩款皆採低紋波設計、通過 IEC/UL 62368-1 影音安規，並內建 OVP／OCP／SCP 三重保護；其中 KSA-35P 已獲國際知名高階音響品牌採用於其藍芽／無線音響，是經市場驗證的可靠選擇。

📦 產品資訊

🔹 KSA-5W series｜5W｜5V｜Max 1A
輕巧的純淨 5V 電源，低紋波輸出保護音訊晶片，是迷你與入門藍芽音響的理想拍檔。
🔹 KSA-35P｜35W｜USB-C PD 5／9／12／15／20V｜Max 3A
支援 PD 協定的 USB-C 快充電源，多段電壓、低紋波，專為高階藍芽／無線音響打造，也能一機通用手機與平板。

⭐ 產品亮點
一站覆蓋 5V 到 USB-C PD｜低紋波，還原純淨聲底｜IEC/UL 62368-1 影音安規｜OVP／OCP／SCP 三重保護
KTEC 將持續以專業電源技術與製造實力，支持各類藍芽音響與消費電子的創新設計，為每一次精準輸出提供穩定、安全、可靠的動力。

💳 歡迎與我們聯繫，一起開發更高效、更可靠的電源產品。
👉 https://www.twktec.com/

📰 Product Application｜Bluetooth Speakers

Great sound starts with clean power. As Bluetooth speakers chase smaller enclosures, deeper bass, and longer battery life, the most overlooked yet decisive part is often the power supply hidden inside. Ripple or noise on that rail can surface as background hiss or squeezed dynamics—holding back even the finest driver.

When it comes to powering them, Bluetooth speakers follow two paths: mini and entry models run on a fixed 5V for compactness and cost, while mid-to-high-end and portable models adopt USB-C PD, powering and fast-charging over a single cable. KTEC Global's lineup spans both ends—the KSA-5W delivers clean, stable 5V, while the KSA-35P offers multi-step 5–20V PD for higher power and universal charging.

Both feature a low-ripple design and IEC/UL 62368-1 A/V safety certification, with built-in OVP/OCP/SCP protection. The KSA-35P is already deployed by a leading international high-end audio brand in its Bluetooth/wireless speakers—a market-proven, reliable choice.

📦 Product Information

🔹 KSA-5W series｜5W｜5V｜Max 1A
Compact, clean 5V power with low-ripple output that protects the audio chip—an ideal match for mini and entry Bluetooth speakers.
🔹 KSA-35P｜35W｜USB-C PD 5/9/12/15/20V｜Max 3A

A PD-compliant USB-C fast charger with multi-step voltages and low ripple—built for premium Bluetooth/wireless speakers, and just as handy for phones and tablets.

⭐ Product Highlights
One lineup from 5V to USB-C PD｜Low ripple for a clean sonic floor｜IEC/UL 62368-1 A/V safety certification｜Triple OVP/OCP/SCP protection
KTEC will continue to leverage its professional power technology and manufacturing expertise to support innovation in Bluetooth speakers and consumer electronics, delivering stable, safe, and reliable power for every precise output.

💳 Contact us to develop more efficient and more reliable power solutions together.
👉 https://www.twktec.com/

24/06/2026

📰 產品應用｜電梯控制板電源解決方案
電梯每天在商辦大樓、醫院與捷運站穩定運轉，背後的控制板同時協調馬達驅動、安全迴路、樓層顯示與緊急通話。這對電源要求極高——必須承受高負載切換與瞬間峰值電流，並在機房環境下長期穩定，任何電壓波動都可能使安全系統失效。
針對電梯控制板多層次、寬電壓的供電需求，KTEC 冠德國際科技提供完整三層方案：高功率主電源（主控與馬達驅動）、中功率工業電源（安全繼電器與門控）、低功耗終端電源（樓層顯示與呼叫按鍵），一套產品線覆蓋所有用電層次。
全系列通過國際工業安規認證，內建 OVP／OCP／SCP 保護，高功率密度設計有效縮小體積，協助製造商在有限的控制箱內打造更可靠、更緊湊的系統。

📦 產品資訊
🔹 KEC-400W｜400W｜12/15/19/24/28/36/48V｜Max 33.33A
高功率密度嵌入式電源，多電壓輸出，適合主控板與馬達驅動，穩定應對高負載與峰值電流。

🔹 KED-100W｜100W｜12/24/48V｜Max 8.33A
工業等級嵌入式電源，專為惡劣環境設計，供應安全繼電器板、門控與輔助控制模組。

🔹 KED-30W｜30W｜3.3/5/9/12/15/24/48V｜Max 6A
超寬電壓、體積精巧，適合樓層顯示板、呼叫按鍵與緊急照明等低功耗末端。

⭐ 產品亮點
全球安規認證｜高功率密度設計｜OVP／OCP／SCP 完善保護｜3.3V–48V 超寬電壓覆蓋

KTEC 持續以專業電源技術，支援電梯設備創新，為每一次安全往返提供可靠電力。
💳 歡迎與我們聯繫，一起開發更可靠的電梯電源方案。
👉 https://www.twktec.com/

📰 Product Application｜Power Solutions for Elevator Control Boards

Elevators run quietly around the clock in office towers, hospitals, and transit stations. Behind every ride, the control board coordinates motor drives, safety circuits, floor indicators, and emergency intercoms—all at once.

Its power demands are exceptional: it must handle high-load switching and peak currents while staying stable in harsh machine-room conditions, where a single voltage fluctuation can compromise the entire safety system.

For these multi-layer, wide-voltage needs, KTEC Global offers a complete three-tier solution: high-power primary supply (main controller and motor drive), mid-power industrial supply (safety relays and door control), and low-power terminal supply (floor displays and call buttons)—one product line covering every power layer.

All units carry major international industrial safety certifications with built-in OVP/OCP/SCP protection. High power density designs reduce footprint, helping manufacturers build more reliable, compact control systems within limited cabinet space.

📦 Product Information

🔹 KEC-400W｜400W｜12/15/19/24/28/36/48V｜Max 33.33A
High power density embedded supply with multi-voltage output—ideal as the primary source for main controllers and motor drives under high-load and peak-current demands.

🔹 KED-100W｜100W｜12/24/48V｜Max 8.33A
Industrial-grade embedded supply engineered for harsh environments, powering safety relay boards, door drives, and auxiliary control modules.

🔹 KED-30W｜30W｜3.3/5/9/12/15/24/48V｜Max 6A
Ultra-wide voltage in a compact form—suited for low-power terminals like floor displays, call buttons, and emergency lighting.

⭐ Product Highlights
Global safety certifications｜High power density design｜Full OVP/OCP/SCP protection｜Ultra-wide 3.3V–48V coverage
KTEC continues to leverage its power technology and manufacturing expertise to support elevator equipment innovation, delivering reliable power behind every safe journey.

💳 Contact us to develop more reliable elevator power solutions together.
👉 https://www.twktec.com/

28/05/2026

📰 產品應用｜外接硬碟與資料儲存設備

無論是桌上型的大容量外接硬碟，還是 NAS 網路儲存伺服器，在硬碟馬達啟動與資料密集讀寫的過程中，都需要極為穩定的電力支援。
一款具備低紋波雜訊與高可靠度的電源產品，正是確保儲存設備不掉速、不中斷，並維持硬碟壽命與資料安全的核心關鍵。

面對現代數位儲存設備長時間連續運作的需求，KTEC 提供完整的電源解決方案。我們這次帶來的兩款外接式電源變壓器，不僅能提供硬碟馬達運轉時所需的充沛電流，更具備高轉換效率與極低的待機功耗，幫助儲存設備在高效運作的同時，符合現代節能與安規標準。

KTEC 的電源產品具備完善的安全防護機制與極佳的穩定性，能有效降低系統異常風險，為您的數位資產保駕護航，成為現代外接儲存設備中最堅實的能量後盾！

📦 產品資訊
產品型號｜KSA-18W-120150VU
規格｜18W｜5-7.5/ 9-15/ 18-24V｜3A Max

產品型號｜KSA-36W-120300HU
規格｜36W｜9-24V｜3A Max

產品型號｜KSA-50W series
規格｜50W｜9-15/18-24V｜5A Max

產品型號｜KSA-120W series
規格｜120W｜12-24V｜10A Max

⭐亮點｜
國際安規認證：符合 UL 與 CUL 的 UL 62368-1 標準。
優異節能表現：擁有高達 85% 至 87.4% 以上的平均轉換效率，且無載功耗低於 0.1W。
全面安全防護：內建過壓保護 (OVP)、過流保護 (OCP) 及短路保護 (SCP)，確保設備運行無虞。

KTEC 將持續以專業的電源技術與製造實力，支援各類商務終端設備的創新設計，為每一次的高效產出提供穩定、安全且值得信賴的產品。💳 歡迎與我們聯繫，一起開發更高效、更可靠的電源產品。👉 https://www.twktec.com/

📰 Product Application | External Hard Drives & Data Storage Devices

Whether for desktop high-capacity external hard drives or NAS network storage servers, a highly stable power supply is essential during hard drive motor startup and intensive data read/write processes. A power adapter with low ripple noise and high reliability is the core key to ensuring storage devices operate without speed drops or interruptions, while maximizing hard drive lifespan and data security.

Facing the demand for long-term, continuous operation of digital storage equipment, KTEC offers comprehensive power solutions. The two external power adapters we feature today not only provide the ample current required for hard drive motors, but also deliver high conversion efficiency and extremely low standby power consumption. This helps storage devices operate efficiently while meeting modern energy-saving and safety standards.

KTEC's power products feature comprehensive safety protection mechanisms and excellent stability. They effectively reduce the risk of system abnormalities, safeguard your digital assets, and serve as the most solid energy backbone for external storage devices!

📦 Product Information
Model｜KSA-18W-120150VU
Specs｜18W | 5-7.5V / 9-15V / 18-24V | 3A Max

Model｜KSA-36W-120300HU
Specs｜36W | 9-24V | 3A Max

Model｜KSA-50W series
Specs｜50W｜9-15/18-24V｜5A Max

Model｜KSA-120W series
Specs｜120W｜12-24V｜10A Max

⭐ Highlights｜
Global Safety Certifications: Compliant with UL and CUL standards (UL 62368-1).
Excellent Energy Efficiency: Average efficiency of 85% to 87.4% minimum, with a maximum no-load power consumption of less than 0.1W.
Comprehensive Safety Protection: Built-in Over-voltage Protection (OVP), Over-current Protection (OCP), and Short-circuit Protection (SCP), ensuring worry-free equipment operation.

KTEC will continue to support the innovative design of various commercial terminal devices with our professional power technology and manufacturing capabilities, providing stable, safe, and reliable products for every efficient output. 💳 Welcome to contact us to jointly develop more efficient and reliable power products. 👉 https://www.twktec.com/

30/04/2026

從接班到永續：柬埔寨工廠的轉型之路

當 49% 的對等關稅在凌晨無預警襲來，市場陷入恐慌時，領導者該如何抉擇？冠德科技總經理鄭吉君（Kaspar）在《敏敏輕鬆學》Podcast 的最新訪談中給出了直白的答案：別急著去行天宮拜拜，先拿出計算機。面對關稅衝擊，他選擇用「災害數學」將恐慌化為具體數據，並在短短三天內飛往菲律賓展開新佈局。對他而言，逆境是常態，當挑戰變得具體，靈活轉身的策略也就隨之浮現。

然而，真正的轉型與韌性並非一蹴可幾。在訪談中，Kaspar 回顧了當年猶如「佛祖說法」般的龍樹下面試，以及一場長達 28 天罷工所帶來的震撼教育。這段痛定思痛的經歷，讓他徹底拋棄過往強勢的「殖民者心態」，轉而以尊重和平等作為跨國管理的基石。正是這樣的文化重塑，孕育出我們如今最無價的資產——那些經過十年淬鍊、具備東協地緣優勢的柬埔寨在地幹部，他們現在正是我們拓點國際的先鋒部隊。

在佈局全球的同時，我們也未曾停下技術進化的腳步。展望未來，我們正將 MES 系統生態圈延伸至 SMT 產線，透過條碼級別的精密追溯與防錯機制，徹底告別傳統工廠的舊印象。我們不只要做製造業，更要打造具備深厚技術底蘊的永續體質。

「享受逆境，它是老天給領導者最寶貴的禮物。」Kaspar 這句結語，為所有在變局中奮鬥的經理人打了一劑強心針。邀請你點擊連結收聽完整節目，與我們一起見證這段從接班走向永續的真實蛻變。
🎧 完整收聽：https://reurl.cc/Wb8Z3x

From Succession to Sustainability: Transforming a Cambodian Factory

When a 49% reciprocal tariff is announced overnight, panic is the natural market response. But for Kaspar Cheng, General Manager of Kuan Te Technologies, it was a moment to reach for a calculator, not a prayer book. In his recent appearance on the "[敏敏輕鬆學]" podcast, Casper shared how he turned the chaos of the global tariff shock into actionable "disaster mathematics."

By translating fear into concrete data, he navigated the crisis and initiated a rapid strategic expansion into the Philippines within just 72 hours. It’s a powerful reminder that when problems become quantifiable, the path forward becomes clear.

However, building true enterprise resilience is a journey that goes far beyond geography. Kaspar candidly recounted our early days in Cambodia—conducting grassroots interviews under a Bodhi tree—and the hard-learned lessons from a 28-day strike. That pivotal moment forced a necessary departure from an outdated "colonial mindset," replacing it with a culture rooted in mutual respect and equality. This cultural transformation cultivated our most invaluable asset: a "Golden Generation" of local Cambodian leaders who are now spearheading our ASEAN cross-border operations with their extensive experience and regional mobility.

As we expand our global footprint, our commitment to technological evolution remains steadfast. Looking ahead, we are extending our MES ecosystem into the SMT workshop. By implementing barcode-level controls and robust mechanisms for precision IC traceability, we are leaving the traditional "iron shack" stereotype behind. We are building a modern, AI-ready manufacturing powerhouse with sustainability in its DNA.

"Enjoy the adversity. Each crisis is a gift that forces you to evolve into a stronger version of yourself." This powerful closing thought from Kaspar serves as a guiding principle for navigating today’s volatile landscape.

Tune in to the full episode to hear the unfiltered story of our ongoing transformation.
🎧 Listen to the full episode here: https://reurl.cc/Wb8Z3x

23/04/2026

數據驅動品質：全面 MES 整合🚀

為了提供客戶更穩定、更高品質的產品，我們正全力推進數位轉型！目前，我們已成功導入 MES（製造執行系統），完美打通企業資源規劃系統 (ERP) 與底層設備的資訊樞紐，實現生產現場的即時監控與管理。

透過這次的 MES 導入，我們達成了三大核心價值的升級：

🔍 透明化 (Transparency)：告別資訊黑箱！管理者現在能即時掌握產線進度與動態良率，讓生產過程的每一個環節都清晰可見。

📋 可追溯性 (Traceability)：每一件產品都擁有了專屬的「數位身分證」。我們為產品建立了完整的數位履歷，無論是維修歷程還是測試歷程，皆有跡可循。

🛡️ 過站管控 (Station Control)：我們用系統取代人工作業的盲區！透過強制檢核工序，系統會嚴格把關，確保只有「測試通過」的半成品才能流入下一站，將不良品流出的風險降至最低。

這只是我們的第一步，下一步我們將走向更深度的精準智造。
展望未來，我們預計將 MES 系統的版圖全面擴展至 SMT 車間！屆時，我們的核心重點將聚焦於「IC 物料精準追溯」。我們將在電子製造最關鍵的上料環節實現條碼級管控，確保每一顆微小零件的來源與去向都清清楚楚，徹底杜絕錯料風險。
從現在的製程嚴密管控，到未來的全面物料追溯，我們將持續「以數據驅動品質」，致力於成為您最安心、最值得信賴的合作夥伴！🤝

Data-Driven Quality: Full MES Integration 🚀

To provide our customers with even more stable and higher-quality products, we are fully accelerating our digital transformation! We have successfully implemented our Manufacturing Ex*****on System (MES), seamlessly connecting our Enterprise Resource Planning system (ERP) with our shop-floor equipment to enable real-time monitoring and management of our production lines.

Through this MES integration, we have upgraded our operations across three core values:

🔍 Transparency: Say goodbye to information silos! Our management team can now monitor production progress and real-time yield rates, making every step of the manufacturing process completely visible.

📋 Traceability: Every product now has its own "digital ID." We have established comprehensive product lifecycles, ensuring that all maintenance and testing records are fully documented and easily traceable.

🛡️ Station Control: We are replacing manual blind spots with system automation! Through mandatory process checks, the system strictly ensures that only products with a "Pass" status can flow to the next station, minimizing the risk of defective outputs.

This is just our first step. We are moving toward even deeper precision manufacturing.

Looking ahead , we plan to expand our MES ecosystem into our SMT workshop! Our core focus will be on precision IC material traceability. We will implement barcode-level control at the most critical material loading stages, ensuring the exact origin and destination of every micro-component are tracked, completely eliminating the risk of loading errors (Poka-Yoke).

From rigorous process control today to comprehensive material traceability tomorrow, we will continue to drive quality with data and remain your most reliable manufacturing partner! 🤝

01/04/2026

📰產品應用｜高階商用列印設備

無論是桌上型的商務印表機，還是大型的企業級多功能複合機，在啟動馬達與加熱元件的瞬間，都需要極為穩定且充沛的電力支援。一款具備高可靠度與優異瞬間負載能力的電源產品，正是確保列印設備不卡紙、不中斷，並維持高畫質輸出的核心關鍵。

面對高階辦公設備長時間待機與頻繁運作的需求，KTEC 提供完整的電源解決方案。無論您需要的是隨插即用的外接式變壓器，還是極致微型化的機內板載電源，KTEC 都能兼顧高轉換效率與低待機功耗，幫助設備在高效運作的同時，符合現代節能規範。

KTEC 的電源產品具備高度的安全防護機制與極佳的穩定性，能有效降低系統異常風險，成為現代高階辦公與列印設備中最堅實的能量後盾！

📦 產品資訊
產品型號｜KEC-130W 系列 (內建式裸板電源)**
規格｜Output power: 100W (自然散熱) / 130W (風扇散熱), Output Voltage: 12V~48V 可選
亮點｜超小尺寸 3"x2" 低高度設計、高達 93% 轉換效率，同時符合 IT 設備與高階醫療設備 (2 x MOPP) 雙重安規。

KTEC 將持續以專業的電源技術與製造實力，支援各類商務終端設備的創新設計，為每一次的高效產出提供穩定、安全且值得信賴的產品。
💳 歡迎與我們聯繫，一起開發更高效、更可靠的電源產品。👉 https://www.twktec.com/

💳 Product Application | High-End Commercial Printing Equipment

Whether it's a desktop business printer or an enterprise-grade multi-function peripheral (MFP), stable and abundant power is essential the moment motors start and heating elements activate. A high-reliability power supply with exceptional peak load capability is the core key to ensuring smooth operation, preventing jams, and maintaining high-quality output.

To meet the demands of long standby times and frequent operation in high-end office equipment, KTEC provides comprehensive power solutions. Whether you require a plug-and-play external adapter or an ultra-miniaturized internal open-frame power supply, KTEC balances high conversion efficiency with low standby power consumption—helping your equipment operate efficiently while complying with modern energy-saving standards.

KTEC’s power products feature advanced safety protection mechanisms and superior stability, effectively reducing system anomaly risks and serving as the most solid energy backbone for modern high-end office and printing equipment!

📦 Product Information
Model | KEC-130W Series (Internal Open-Frame Power Supply)

Specs | Output power: 100W (Convection) / 130W (Forced Air), Output Voltage: 12V~48V selectable.

Highlights | Ultra-compact 3"x2" low-profile design, up to 93% conversion efficiency, and dual certification for both IT equipment and high-end medical devices (2 x MOPP).

KTEC continues to support the innovative design of various business terminal devices with professional power technology and manufacturing expertise. We provide stable, safe, and trustworthy products for every high-efficiency output.

💳 Contact us today to develop more efficient and reliable power products together!
👉 https://www.twktec.com/

25/03/2026

🏥 產品應用｜高階醫療影像設備

在現代醫療中，高階影像設備（如超音波、牙科用 X 光機）是醫師守護病患健康的第一線重鎮。這類設備內部精密元件眾多，在運作時不僅需要極高功率的瞬間輸出，更對「電流純淨度」與「絕對安全性」有著零容忍的嚴苛要求。

微小的電壓波動，可能導致影像雜訊與誤判；而漏電流的防護，更直接攸關病患與醫護人員的生命安全。

面對高階醫療設備對「極致安全與穩定」的渴望，KTEC 冠德國際傾力打造了高達 1200W 的大功率醫療級電源解決方案——KEC-1K2W。它不僅能輕易驅動耗電龐大的醫療造影系統，更具備以下三大核心優勢，成為精密醫療儀器背後最安靜、最強大的心臟：

🛡️ 1. 醫療級極致安全防護 (2xMOPP & Type BF) 符合嚴苛的 IEC/EN/UL 60601-1 醫療安規。具備 2xMOPP（雙重病患保護機制），並支援 Type BF（Body Floating）適用等級。其超低漏電流設計（

19/03/2026

KTEC 類比電源技術升級，佈局高階工業與醫療市場

隨著全球硬體架構的快速迭代，KTEC 冠德國際正穩步推進「數位與類比並進」的技術藍圖。在先前宣佈投入 Edge AI 伺服器電源研發的同時，我們在既有的類比電源（Analog Power）領域，亦迎來了重要的技術升級與市場轉型。

為了應對終端設備對高效能與高可靠度的要求，KTEC 正逐步優化產品結構，降低對常規消費性市場的依賴。我們將研發資源聚焦於技術門檻更高、具備長期價值的「工業」與「醫療」領域，各項技術與安規指標均對標國際一線大廠標準：

🏭 1. 強固型工業電源 (Industrial Power) 工業自動化與智造環境對電源的穩定度有著嚴苛要求。我們的新一代工業電源系列具備優異的環境耐受力，支援 -40°C 至 85°C 的寬溫操作範圍，並嚴格符合電磁相容各等級 Class A、Class B，以及 Class F（絕緣耐溫）規範，確保在極端條件下仍能維持連續運作。

🏥 2. 精準佈局高階醫療電源 (Medical Power) 醫療儀器的供電穩定直接關係到病患安全。KTEC 醫療電源系列嚴格遵循醫療級安規，達到 2xMOPP（雙重病患保護機制）標準，並具備高達 6000V 的耐壓測試實力。在市場策略上，我們務實地聚焦於「周邊醫療與照護儀器」，為醫療設備製造商提供兼顧最高安全標準與量產效益的解決方案。

從 Edge AI 機房到嚴苛的工業廠房與專業醫療環境，KTEC 冠德國際以務實的研發腳步，持續擴展電源技術的應用邊界。我們期盼與全球合作夥伴深化交流，共同構築更穩定、高效的硬體基礎建設。
🤝 了解更多 KTEC 專業電源解決方案： 👉 https://www.twktec.com/

13/03/2026

🖥️ 產品應用｜商用數位看板與 AIO 觸控系統

在百貨商場、交通樞紐與企業大廳中，商用數位看板與 All-in-One (AIO) 觸控系統是吸引目光的關鍵。這類設備必須 24 小時連續運作、流暢播放高畫質影音；然而，為了迎合現代極簡美學，系統內部的散熱與走線空間往往被極度壓縮。

面對視聽與資訊設備的嚴苛要求，KTEC憑藉深厚的電源設計底蘊，推出專為此類應用打造的 180W 高功率解決方案：採用無風扇的自然散熱設計（Natural convection），在無聲中穩定輸出高達 180.18W 的動能；而僅 23.5mm 的超薄機身，更能完美契合現今終端設備輕薄化的設計趨勢。

KTEC KSA-180A 系列不僅符合最新的國際影音與資訊設備安全法規（EN 62368-1），更取得 UL、CE、UKCA 等多國安規認證。內建過壓、過流與短路等多重保護機制，搭配高達 5 萬小時的 MTBF，為高負載的商業環境提供最堅實的供電後盾。

📦 產品資訊
🔹 產品型號： KSA-180A-210858M3
🔹 產品規格： 180.18W | 21.0V | 8.58A Max.
🔹 適用範圍：支援 55-65 吋商用液晶顯示器
🔹 核心優勢：
✔️ 符合 EN 62368-1 全球安規認證
✔️ 厚度僅 23.5mm 的極致超薄機身
✔️ 無風扇靜音設計，完美融入商業空間

KTEC 將持續以專業的電源技術與製造實力，支援高階視聽設備與商用顯示終端的創新應用，為每一台設備提供穩定、安全且值得信賴的動力。
⚡ 歡迎與我們聯繫，一起開發更高效、更可靠的電源產品。
👉 https://www.twktec.com/

KTEC 冠德國際科技

13/08/2026

16/07/2026

24/06/2026

28/05/2026

30/04/2026

23/04/2026

01/04/2026

25/03/2026

19/03/2026

13/03/2026

Address

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Listing takedown request