Domainkom

Domainkom صفحة متخصصة بالخدمات الهندسية والمدنية والاستشارات

19/02/2023

AI in oil and gas industry

         A combination of increased pulldown force, rotary  , and 2600 cfm  , this drill rig is one of the most powerful...
14/02/2023



A combination of increased pulldown force, rotary , and 2600 cfm , this drill rig is one of the most powerful drills for blasthole drilling. Tested and proven throughout differing regions and conditions around the world, it exceeds all in its class. With a 38 (85,000 lbs) bit , it can bring unsurpassed performance to your operation.

If , , and with the of ownership are on your list of priorities, look no further than these series. Equipped with a standard Rig Control System ( ) operating platform, It raises the bar for .

Please do not hesitate to contact us for any further details 🙂

         This rotary blasthole drill rig has become a   industry staple, thanks to its proven performance and reliabilit...
13/02/2023



This rotary blasthole drill rig has become a industry staple, thanks to its proven performance and reliability.

With a 75,000 lbs (34 ) bit , this is designed for adaptability — so it easily fits into any drilling operation. It was originally used primarily in overburden drilling due to the 70,000 lbf (311 kN) of pulldown it provides to a rotary tricone bit up to 10-5/8 in (270 mm). Today, it has also expanded into hard rock applications such as and .

If technology, productivity and long asset life with the of ownership are on your list of priorities, look no further than this series. Equipped with a standard Rig Control System ( ) operating platform, it sets the bar for efficiency.

The standard Rig Control System (RCS) provides on board capability as part of the standard drill package to help deliver and . With RCS you can run automation with an operator on board with options like and or you can run with the operator off the drill with the optional package allowing one operator to run one or multiple . With the RCS system on you can even achieve your ambition of fully with almost no human interaction with the drill.

Please do not hesitate to contact us for any further details 🙂

         This   operates in almost every surface   application out there.  ,  ,  ,   ,  ,   — you name it. When it comes...
11/02/2023



This operates in almost every surface application out there. , , , , , — you name it.

When it comes to drilling -pass holes up to 18 m (59 ft) with up to 270 mm (10-5/8 in), it has proven itself time and time again. With a 34 (75,000 lbs) bit , which can bring unsurpassed performance to your operation.

İt features a patented with for improved component life and of . And options for both and make it a flexible option for any type of operation.

Please do not hesitate to contact us for any further details 🙂

         This  drilling rig is a flexible   that can be configured in many different ways for a wide range of rotary and...
10/02/2023



This drilling rig is a flexible that can be configured in many different ways for a wide range of rotary and drilling operations. A proven staple in its range, this model is extremely — which can add up to significant savings. It delivers a full range of options to meet your needs now and in the future.

This drill rig has quickly become a staple in its product range and has proven its success in many applications. While it is the smallest in the lineup, it delivers nothing short of powerful performance when customers need a flexible and well-packaged .

Please do not hesitate to contact us for any further details 🙂

         This machine is a flexible   that can be configured in many different ways for a wide range of rotary and   dri...
09/02/2023



This machine is a flexible that can be configured in many different ways for a wide range of rotary and drilling . It's extremely -efficient – which can add up to significant savings.

A proven staple in its range, it builds upon the innovation and success, which is operating in over 20 major while maintaining the highest levels of productivity and reliability.

Its -pass capability can improve drilling efficiency by up to 25% when drilling in by eliminating time and allowing for more time for drilling.

With both high and low-pressure to choose from and , it delivers a full range of options to meet your needs now and in the future.

Please do not hesitate to contact us for any further details 🙂

         The DM75 features an insulated, pressurized   with tinted glass, a six-way adjustable   and excellent visibilit...
08/02/2023



The DM75 features an insulated, pressurized with tinted glass, a six-way adjustable and excellent visibility. All operational functions are controlled from the driller’s , and the ergonomic layout allows operators to instantly switch from drilling to for increased productivity. In addition, the -over-hydraulic controls are common across the DM series, making operation easy for drillers with DM series experience. Plus, with a rating of 80 dBA, the noise inside the cab is kept to a minimum for greater operator comfort.

The DM75 is equipped with a number of features to help keep operators safe on the job. Features include a cab with , hydraulic pinning and a pulldown over-center valve — as well as leveling and load-holding . These rigs also have on rotating parts and shutdowns for , , and . Other features include -applied, -released on the tramming , and options can be added to further increase safety.

Please do not hesitate to contact us for any further details 🙂

         The DML rotary blasthole drill rigs is a  -mounted,    -drive rig that’s suitable for a variety of  -pass rotar...
07/02/2023



The DML rotary blasthole drill rigs is a -mounted, -drive rig that’s suitable for a variety of -pass rotary and drilling applications. It’s designed specifically for production blasthole drilling to of 175 ft (53.3 m) with a 30 ft (9.1 m) pipe change or 205 ft (62.5 m) with the optional 35 ft (10.7 m) .

The DML has proven itself in almost every condition to deliver productivity, reliability, and low operating costs year after year. If you around the world, you will see that many of them learned to drill holes with a DML and can attest to its legendary capabilities.

Please do not hesitate to contact us for any further details 🙂

         The DM45/50 rotary blasthole drill rig along with their big brother, the DML, are some of the most popular dril...
06/02/2023



The DM45/50 rotary blasthole drill rig along with their big brother, the DML, are some of the most popular drills in the world for good reason. All three models have proven themselves in almost every condition to deliver productivity, reliability, and low operating costs year after year.

The DM45/50 and ensure a high asset life even in some of the toughest mining conditions. The -cut structural tower lacing ensures a strong without the added weight of less efficient designs. When more air and pulldown are required, the DM45 evolves into a DM50 to give added flexibility to the larger hole sizes in the DM45/50 range.

Please do not hesitate to contact us for any further details 🙂

         This machine is a  -mounted,    -drive rig that’s suitable for a variety of  -pass rotary and   drilling applic...
04/02/2023



This machine is a -mounted, -drive rig that’s suitable for a variety of -pass rotary and drilling applications. It can achieve a clean of 11 m in (36 ft) single-pass applications.

High quality at an excellent value sets this machine apart from other drills in its class. Designed for and small operations, this drill has such a small footprint that makes it easy to on and simple to over the between .

Please do not hesitate to contact us for any further details 🙂

         This machine is a  -mounted,    -drive rotary blasthole drill rig that’s suitable for a variety of multi-pass a...
03/02/2023



This machine is a -mounted, -drive rotary blasthole drill rig that’s suitable for a variety of multi-pass and drilling applications. It can achieve a clean of 8.5 m (28 ft) in single-pass applications or 45.1 m (148 ft) in multi-pass applications with a starter under the rotary head. It also features a 9.1 m (30 ft) drill change and a standard 4-rod .

It is designed for and the structural components will hold up to the -duty cycles required in a mining drill.

Please do not hesitate to contact us for any further details 🙂

         It is designed with deep   drilling in mind, and built to deliver unsurpassed availability and utilization for ...
02/02/2023



It is designed with deep drilling in mind, and built to deliver unsurpassed availability and utilization for cast blasting in large .

It has been proven in some of the toughest mining conditions. With drills that have logged over 100,000 hours of service, it’s easy to see why some of the largest coal mines in the world call upon this machine to do the job.

The units have drilled millions of meters in coal overburden, but that’s not all it can do. These rigs are also well suited for punching holes in hard , day in and day out.

Please do not hesitate to contact us for any further details 🙂

Address

Istanbul

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00
Saturday 09:00 - 17:00
Sunday 09:00 - 17:00

Alerts

Be the first to know and let us send you an email when Domainkom posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Domainkom:

Share