Massive Energy Dynamics

03/01/2025

Demonstration of Indigenous designer solar structure developed in Pakistan which allows single axis manual movement for monthly tilts round the year giving you around 18% more yield.

01/01/2025

Failure of Welding Only Elevated Structures.

How to clean solar panel at home?? ​ ​ ​ ​ ​ ​ ​ ​ ...

30/12/2024

from the Archives: InterSolar 2016 at Dubai World Trade Center. Was lucky to attend a wonderfully informative seminar on solar by Sean White, IREC Certified Master Trainer and, Kristopher Sutton of Solar Energy International, followed by a 2 day training session on SMA Solar Inverters by Mohamed El Khatib of SMA Middle East and Africa

30/12/2024

A compilation of the some of the best installations of Designer Solar Structure in Pakistan. The structure gives you the benefit of generating upto 18% more yield with monthly tilt angle adjustment. Not to forget the jaw opening aesthetics.

29/12/2024

Needless to say, how important is it to emphasize on the Quality of Solar Structure Structure. Engr. Jawad Waheed is critically commenting on the workmanship and problems in solar structures in Pakistan, that lead to failures. Solar consumers must be aware of such problems by hiring only qualified installers that using good engineering practices to install solar systems. Cheap Installations will make you pay later.

02/12/2024

Water Pe*******on into your RCC Slab (Lanter) can be detrimental for your building. It is highly recommended to apply water proofing to avoid any structural failure of your building.

23/11/2024

Exquisitely Installed Canadian Solar Inc. 550W x 10 Panels as an Extension at Dr. Janbaz's Residence, Muslim Town No.1, Faisalabad.
This type of Customized 14G Galvanized Iron Sheet structure gives the advantage of Space Optimization. The Structure is Chemically Anchored with the RCC Lanter with HILTI RE-10 Epoxy Mortar. BBI Homes Syed Brothers Pakistan

17/11/2024

Attention All Solar Consumers in Pakistan. Please be advised, weak welding of channels and girders puts your investment at a great risk. Instead of welding, you are strongly advised to use stainless steel nut-bolts. The lift force due to strong winds can easily break these welding joints which can be detrimental to the safety of your asset and human lives. Also before applying enamel paint you must use Epoxy coating to protect your structure from water pe*******on.

09/11/2024

Signature 1XM Solar Structure Designed and Installed by Engr. Jawad Waheed CEO Massive Energy Dynamics.

07/11/2024

Beautiful Homes, need Beautiful Solar Systems. 595w Canadian Solar Inc. N Type Bifacial x 15 Panels Installed with a Customized HILTI Chemically Anchored Galvanized 14G Powder Coated Solar Structure with 10kW Solis On Gird Inverter installed for a very special client in Citi Housing Sargodha Road Faisalabad. Sole Distributor of

07/11/2024

Most of the consumers are not aware of how important it is to get the Solar Structure Hot Dip Galvanized. This is entirely different from using a Galvanized Sheet, which goes through an electroplating process. The layer of Galvanization Protection is measured in microns. To know more, feel free to contact us.

07/11/2024

The Signature 1XM Solar Structure. Made in Pakistan.