LCZ Fabrication & Mechanical

LCZ Fabrication & Mechanical Providing on site engineering,
Mechanical maintenance and repairs,
Custom 4x4 fabrication and general engineering services. Servicing the south canterbury area.

Another week down, another step closer ! Today’s jobs - Cut and polyurethaned the benchtops, got stock off the floor and...
15/05/2026

Another week down, another step closer !
Today’s jobs - Cut and polyurethaned the benchtops, got stock off the floor and on shelves all whilst juggling and organising current and upcoming jobs !

We appreciate the support, Have a great weekend everyone 😎

FT- Jed the shop dog half asleep awaiting some attention 😅

Busy day today ! Strip down on the big LC80 in preparation for twin lockers and a front end rebuild. Followed by an afte...
14/05/2026

Busy day today !

Strip down on the big LC80 in preparation for twin lockers and a front end rebuild.

Followed by an afternoon of bench building !

As you all know we are mad keen on anything 4x4 here at LCZfab ! Catering for Allmost every aspect of 4x4 upgrades you c...
13/05/2026

As you all know we are mad keen on anything 4x4 here at LCZfab !

Catering for Allmost every aspect of 4x4 upgrades you could dream of right here in south Canterbury.

One of our top picks is the TRE4x4 Differential locker range.
We have personally been using this product for over 10 years in various vehicles and with this experience we stand by the products we sell !

Get in touch, check them out on the website and take your adventure to the next level with LCZfab 😎

Trusty Hilux in for some love today ! This ole girl is in for a variety of repairs and maintenance, we pulled the front ...
12/05/2026

Trusty Hilux in for some love today !
This ole girl is in for a variety of repairs and maintenance, we pulled the front diff to diagnose some faults.

Finished the day with some odd jobs and more organising of the workshop !

Any job Big or small, new or old we can get you sorted !

Custom handrails we recently made have now been powder coated and installed. These came up a treat, each one custom fabr...
11/05/2026

Custom handrails we recently made have now been powder coated and installed.
These came up a treat, each one custom fabricated to suit a different location

From start - finish we have you covered for a wide range of jobs !

Hoist is being put straight to work! Gave it a test with the mighty D-max work truck, then straight into a few services....
09/05/2026

Hoist is being put straight to work!
Gave it a test with the mighty D-max work truck, then straight into a few services.

While servicing is not our go to work, it’s something we are more than happy to take care of for our customers.
You can expect more than just a quick oil and filter change!

With every service we carry out a full visual underbody inspection, check all fluids and advise / replace as needed.

LCZfab is really your 1 stop shop!

As promised, We have a hoist !!, Tucked in the corner for optimal space around the front and sides whilst keeping it eas...
07/05/2026

As promised, We have a hoist !!, Tucked in the corner for optimal space around the front and sides whilst keeping it easy to drive in and out.
Hopefully a happy compromise between workability and not taking up to much valuable floor space !

At a lift height of 4.3M this is one big unit 😎💪

Final bits tomorrow and we shall put it to use 👌

Tomorrow - this space should look very different !New workshop means new hoist, stay tuned 😉😎
06/05/2026

Tomorrow - this space should look very different !

New workshop means new hoist, stay tuned 😉😎

Late model camper in for a 10,000km service today. Standard procedure to have a poke around underneath and we noticed th...
05/05/2026

Late model camper in for a 10,000km service today.
Standard procedure to have a poke around underneath and we noticed the water tanks crossmembers cracking where the handbrake cables have been notched in.
Easy fix now so we Welded the cracks, added brace plates job done.

All completed in house, same day 👌

From a routine service to day-day repairs just send us a message, we can get you sorted !

Happy Monday all ! Hope everyone had a good weekend,We got our letterbox mounted so you can’t miss us at our new address...
04/05/2026

Happy Monday all !
Hope everyone had a good weekend,

We got our letterbox mounted so you can’t miss us at our new address 😎

Few jobs out and about thismorning followed by another TRE air locker install 👌

Playing mechanic today. Brings me back to automotive days ! We fully rebuilt both front calipers, back together with new...
01/05/2026

Playing mechanic today.
Brings me back to automotive days !

We fully rebuilt both front calipers, back together with new pads and rotors this wagon will stop on a dime 👌

Engineering, fabrication and mechanical repairs we do it all !
And the best part - if you can’t bring it to us, our Ute is fully kitted to come to you 😎

Address

5 Opihi Road
Pleasant Point
7982

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when LCZ Fabrication & Mechanical posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category