Wood-Mizer

Wood-Mizer Wood-Mizer New Zealand Official page. We provide top-quality sawmills and woodworking equipment for both softwoods and hardwoods.

Our team offers local support and maintains a stock of products and spares, ensuring quick access to the tools you need. Welcome to Wood-Mizer New Zealand! We specialize in providing top-quality sawmills and woodworking equipment, designed to handle even the toughest hardwoods. Our dedicated team offers in-country support and maintains a stock of products and spares right here in New Zealand, ensu

ring you get the best service and quick access to the tools you need. Whether you're a professional or a hobbyist, we're here to help you achieve your woodworking goals. Wood-Mizer, from Forest to Final Form.

18/06/2026

10 years. Hundreds of mills up and down the country. One pattern keeps showing up: the operators making the most money aren't the ones running flat tack. They're the ones wasting the least.

From blade care to log handling, here's what every Kiwi sawmiller should know about protecting yield (and the profit that goes with it). Whether you're milling macrocarpa, pine, eucalypt or anything that's come down on the block.

Watch it through. Save it. Flick it to the team.
Thin kerf doesn't mean small production. It means smarter production.

That's a wrap on Fieldays Hamilton.Massive thanks to everyone who swung by the stand for a yarn, watched the demos, or t...
16/06/2026

That's a wrap on Fieldays Hamilton.

Massive thanks to everyone who swung by the stand for a yarn, watched the demos, or took the next step into Wood-Mizer ownership. To the legends who loaded their new mills up and headed home to start cutting, we cannot wait to see what you do with them.

The timber milled at the show this year is heading off to Cambridge High School for their workshop, same as last time. The students put it to good use on their builds, and it's choice to be part of that.

Spent the day with Jimmy and his LT15 Wide. Fitted his new power feed, ran the mill through its paces, and the fresh eng...
16/06/2026

Spent the day with Jimmy and his LT15 Wide.

Fitted his new power feed, ran the mill through its paces, and the fresh engine sounds sweet as. Best part? Jimmy's milling Douglas fir logs that came down right where the mill now sits. The bed's literally set up on top of the stumps. You can't make this stuff up.

Big thanks Jimmy for having us out. That's a setup worth bragging about.

15/06/2026

That surface rust on your mill? Don't stress.

Walked out to the shed this winter and spotted a film of orange on the bed rails, clamps or guide arm? You're not the only one. A light bloom of surface rust on bare steel is completely normal through a wet Kiwi winter, even on a mill you've stored properly.

Cosmetic, not structural. Cleans up in minutes.
Scotch-Brite pad + a splash of WD-40 or CRC, wipe along the grain, re-oil after. Mill back to looking sweet.

Full wet-winter playbook with the rest of the milling, blade and drying tips: https://vist.ly/57rmv

13/06/2026

Our blades fit Wood-Mizer, Norwood, Hud-Son, Timberking, Timbery, Baker, Cooks and Woodland mills. Anything with a thin-kerf 25 to 76mm narrow band. Stocked here, order online.

Order three ways:
🔸 By brand
🔸 By mill
🔸 By blade profile

100+ combinations. One that fits yours. 👇
https://vist.ly/57p6i

12/06/2026

Last day at . Come see us, grab one of our 𝐁𝐈𝐆 𝐒𝐌𝐈𝐋𝐄 deals. Stand S18, 125 Mystery Creek Road, Ōhaupō.

11/06/2026

Show-only specials, straight up.
Pop in to Stand S18 at Fieldays today. Watch till the end for the 🅱🅸🅶🅶🅴🆂🆃 🆂🅼🅸🅻🅴 deal of the lot. Catch ya at Mystery Creek, Hamilton.

11/06/2026

Swing by and see our Wood-Mizer NZ team at the fields in Hamilton.
We've got deals so good on our LT15WIDE, LT35, and LX30, they should come with a warning: "𝐌𝐚𝐲 𝐜𝐚𝐮𝐬𝐞 𝐬𝐩𝐨𝐧𝐭𝐚𝐧𝐞𝐨𝐮𝐬 𝐬𝐦𝐢𝐥𝐞𝐬!" Today’s the day to come visit us and snag these exclusives!

Stand S18, Hamilton Fieldays
125 Mystery Creek Road, Ōhaupō

11/06/2026

Your block already has the timber. The LT35 turns it into income.

Hydraulic loading. Hydraulic clamping. Setworks doing the maths. You doing less of the heavy lifting. Real time. Real timber. What you're watching is what you'd be running on your block tomorrow.

If you're still on the fence, this is your sign.
https://vist.ly/57fky

Every log has a story. The mill you choose decides how much ends up as boards, and how much ends up as sawdust.Bandsaw m...
10/06/2026

Every log has a story. The mill you choose decides how much ends up as boards, and how much ends up as sawdust.

Bandsaw mills cut thinner, finish cleaner, and pull more useable timber out of every log. More boards from your macrocarpa, more slabs from your eucalypt.

We've broken down the why.
Read it: https://vist.ly/57b4e

Address

Unit 2, 80 Gargan Road
Mount Maunganui
3171

Website

,

Alerts

Be the first to know and let us send you an email when Wood-Mizer posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Wood-Mizer:

Shortcuts

Share

Category