Norris Engineering Designs

Norris Engineering Designs Welcome to Norris Engineering Designs. Based in South Wales, I offer services to the engineering com

With a background in design of special purpose machinery for a leading UK manufacturer I can cater for a wide range of processing and automation solutions. Areas of experience include:

Mechanical engineering
Machine design
Concept designs
Draughting/Detailing
Engineering schematics
Automation solutions
Pneumatic circuits


The service I provide can range from design only, with manufactur

ing drawings submitted to the customer to source manufacturing, or I can manage the prospective project to include working with trusted manufacturing companies to deliver and install your complete solution. Previous clients include those from backgrounds in:

General engineering
Adhesive application
Chemical coating
Sandwich panel manufacture
Insulation conversion
Packaging
Handling
Automation
Vacuum systems
Automotive tooling
NDT
Subsea radiography
Engineering Literature
Conceptual design


All Design work will take place using Autodesk Inventor (3-D CAD) and AutoCAD Mechanical (2D CAD) with all drawing portfolios provided in customer specified formats where possible. Portfolios will also be supplied with literature where applicable (part lists, stock lists, risk assessment etc). I offer an accurate and swift service which is flexible around customer requirements. I understand that for many projects information can be confidential, therefore non-disclosure agreements are offered as standard practice

Playing about with some nylon printed parts. Know nylon needs the heat to bond layers, but good lord it stays hot for ag...
27/05/2026

Playing about with some nylon printed parts. Know nylon needs the heat to bond layers, but good lord it stays hot for ages

Trip over to Ireland done, both bead applicators moved and recommissioned in 24hrs. customer back up to capacity with pl...
07/05/2026

Trip over to Ireland done, both bead applicators moved and recommissioned in 24hrs. customer back up to capacity with plenty of extra floorspace.

Trailing making some fabrication jigs to speed up assembly and increasing accuracy.....and wasnt sure what else i was us...
03/05/2026

Trailing making some fabrication jigs to speed up assembly and increasing accuracy.....and wasnt sure what else i was using yellow filiment for

Service trip up Manchester sorted. Makes a nice change to go north on the M6 rather than revisiting the south east again...
29/04/2026

Service trip up Manchester sorted. Makes a nice change to go north on the M6 rather than revisiting the south east again...again.....and again. Plus got to solder something again for the first time in about 25 years, and got to test the towing on the new work vehicle. the little things

Be glad to get this one underway. Hot wire cutter for converting blocks of EPS or XPS into insulation slabs (up to 16 pe...
12/04/2026

Be glad to get this one underway. Hot wire cutter for converting blocks of EPS or XPS into insulation slabs (up to 16 per run) with pneumatic tension, pneumatic entry angle adjustment, spurgear drive, retractable datums and side light guards.

Well, site work to Texas has been eventful. Asked by a previous customer with another company to help them out with advi...
13/03/2026

Well, site work to Texas has been eventful.

Asked by a previous customer with another company to help them out with advising a temporary pumping solution while the original manufacturer was awaiting parts, leave them down for 6 - 8 weeks.

We just so happened to have a pump in stock, so instead of advise, we could react with getting them up and going, which now they are in a position to do.

The not so good part is, with 24 hours of being in the lone star state, ended up in a quite severe car wreck. nobody seriously hurt, lots of bruising and aches but both cars totalled.

climbing over machines hours after a car wreck - cant say im not commited to finishing a job!

Back from another few days road roadtripping. This time Liverpool, Northern Ireland and Rebulic of Ireland.3 services/br...
19/02/2026

Back from another few days road roadtripping. This time Liverpool, Northern Ireland and Rebulic of Ireland.

3 services/breakdown, 3 successful site days and 3 happy customers

And another one thats needed a few visits lately. Refurb jobs never go to plan, but both old and new CNC wire saw machin...
13/02/2026

And another one thats needed a few visits lately. Refurb jobs never go to plan, but both old and new CNC wire saw machines now working together side by side to massivly increase production.

Not posted for a while, mainly due to this lump, but FINALLY up and running. Lots of issues from various angles, enough...
07/02/2026

Not posted for a while, mainly due to this lump, but FINALLY up and running. Lots of issues from various angles, enough to write a book about, but now ready to produce panels in Southern England, which FYI, fed up of seeing the scenary there:

Glue applicator, with integral GRP cutting
Scissor lift bed so stacks can be built up
Bellows press to press the panels
Runout table for finished panels to be decant from onto a CNC router

Site job done and dusted in Andover. Bead applicator up and running
03/11/2025

Site job done and dusted in Andover. Bead applicator up and running

Address

9 Cillefwr Ind. Estate
Carmarthen
SA313RB

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

07540475433

Website

Alerts

Be the first to know and let us send you an email when Norris Engineering Designs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Norris Engineering Designs:

Shortcuts

Share

Category