JFM- Jacob's Fusion & Metalshaping

JFM- Jacob's Fusion & Metalshaping Hand made motorbike parts using traditional methods, bike replicas, custom parts, carbon fiber. Welding, metalshaping and machining.

Something special, I mean most of the stuff I make is special in one way or the other but this bike is going to be super...
17/12/2025

Something special, I mean most of the stuff I make is special in one way or the other but this bike is going to be super special! Here it's just one of the puzzles ;) Cagiva forever!!

Cagiva elefant 650- 4mm Bashplate!
12/10/2025

Cagiva elefant 650- 4mm Bashplate!

650 cagiva, larger fuel tank, that was fun!!
12/10/2025

650 cagiva, larger fuel tank, that was fun!!

I added Pro bite plates for the lowered foot pegs that I made.
02/06/2025

I added Pro bite plates for the lowered foot pegs that I made.

A small job milled and welded a locating block for the brake caliper mount on a custom swing arm.
02/06/2025

A small job milled and welded a locating block for the brake caliper mount on a custom swing arm.

Hardest and most complex milling job I ever had to do, I'm glad it's done as you can imagine, from a huge block of 6061 ...
02/06/2025

Hardest and most complex milling job I ever had to do, I'm glad it's done as you can imagine, from a huge block of 6061 to a finished yokes! Finished with a lick of cerakote.

Here I designed a bashplate for Cagiva E750/900 to keep the bikes safe for the people that actually use them the way the...
02/06/2025

Here I designed a bashplate for Cagiva E750/900 to keep the bikes safe for the people that actually use them the way they were designed to be used ;) 4mm aluminium

Here we have a handful of aluminium beauties I built to finish off an old 750 2t build ! Battery cover with fins and fro...
02/06/2025

Here we have a handful of aluminium beauties I built to finish off an old 750 2t build ! Battery cover with fins and front engine mounts I milled out of 6061 billet and foot peg plates I welded in aluminium coated in cerakote to finish it off!

I've been asked if it was possible to build a replacement for an old plastic Bashplate for this beauty! The owner will b...
02/06/2025

I've been asked if it was possible to build a replacement for an old plastic Bashplate for this beauty! The owner will be racing the bike so She asked for something bomb proof! 4mm aluminium will do the job nicely ! What a beautiful bike!

Out with the old in with the new stainless system it flows so much better ;) gains!
02/03/2025

Out with the old in with the new stainless system it flows so much better ;) gains!

Still hot! out of the mill a set of engine mounts for the 750cc 2t beast. More to come.
02/02/2025

Still hot! out of the mill a set of engine mounts for the 750cc 2t beast. More to come.

Bimota Prototype exhaust! What a project!!I loved every second I worked on this thing! Could it be done easier? Sure it ...
25/11/2024

Bimota Prototype exhaust! What a project!!
I loved every second I worked on this thing! Could it be done easier? Sure it could but would it be as cool as this?
The beast of a bike like this deserves going the extra mile!
The main thing I had to achieve was to keep the front and rear exhaust volume the same which I did. MotoCorse evoluzione titanium end cans to finish the system off! Amazing if I say so myself. Can't wait to hear it!! And I can't believe I made it with my own hands. Every day is a learning day for me and I'm grateful to have been a part of this build!

Highland Blast Thank you for a great job you did on the frame powdercoating.

Nivag Nostrebor

Address

Inverness

Telephone

+447710603839

Website

Alerts

Be the first to know and let us send you an email when JFM- Jacob's Fusion & Metalshaping posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JFM- Jacob's Fusion & Metalshaping:

Shortcuts

Share

Category