Airmech Compressed Air Engineers

Airmech Compressed Air Engineers Call us today to learn more! Low cost, low stress compressed air systems give you peace of mind, and more importantly keeps your factory producing.

No hidden fees, delays, excuses or broken promises and no more paying for extra services/parts that you don't need or want. We're able to be highly competitive because we are a family run business with low overheads and over 40+ years in the industry. If you are running a complex turnkey system or you are completely new to air compressors, then we are a perfect fit. By focusing on your individual

setup, we are able to streamline our process, and that's how we can offer you unbeatable pricing with world-class customer service.

Most UK factories are wasting 20 - 30% of their compressed air energy every year.Not because the compressor is “broken”....
21/05/2026

Most UK factories are wasting 20 - 30% of their compressed air energy every year.

Not because the compressor is “broken”.
Because nobody is measuring what the system is doing.

Over a compressor’s life, around 80% of the total cost is the electricity to run it, not the machine. So the question isn’t:

“What did the compressor cost?”

It’s:

“How efficiently is our compressed air system running?”

When we run an Airmech air audit, we usually find money hiding in six places:

- System pressure set higher than needed
- Leaks quietly dumping 10–20% of your air into thin air
- Waste heat that could be heating your building
- Over‑treatment (ISO Class 1 air where Class 4 would do)
- Old pipework creating pressure drop
- Reactive servicing that lets efficiency slip for months

Individually, each fix is small. Together, they often add up to 20 - 30%+ savings with paybacks in months, not years.

That’s why we don’t open with “you need a new compressor.”
We start with a 7‑day air audit using flow meters and power loggers, then give you a plain‑English report ranked by payback period.

If you run a factory, workshop, paint line, or bottling plant in the Midlands (or wider UK) and want to know what your compressed air is really costing you:

Reply “AUDIT” or message me “AUDIT” and I’ll send details of the Airmech Air Audit and the next available dates.

You can’t optimise what you don’t measure. Let’s start measuring.

𝘽𝘾𝘼𝙎 𝘾𝙤𝙣𝙛𝙚𝙧𝙚𝙣𝙘𝙚 𝘿𝙚𝙗𝙧𝙞𝙚𝙛 (𝟱/𝟱): 𝙒𝙝𝙤 𝙬𝙞𝙡𝙡 𝙧𝙪𝙣 𝙮𝙤𝙪𝙧 𝙘𝙤𝙢𝙥𝙧𝙚𝙨𝙨𝙚𝙙 𝙖𝙞𝙧 𝙨𝙮𝙨𝙩𝙚𝙢 𝙞𝙣 𝟮𝟬𝟯𝟬?Compressed air regulation is getting stri...
07/05/2026

𝘽𝘾𝘼𝙎 𝘾𝙤𝙣𝙛𝙚𝙧𝙚𝙣𝙘𝙚 𝘿𝙚𝙗𝙧𝙞𝙚𝙛 (𝟱/𝟱): 𝙒𝙝𝙤 𝙬𝙞𝙡𝙡 𝙧𝙪𝙣 𝙮𝙤𝙪𝙧 𝙘𝙤𝙢𝙥𝙧𝙚𝙨𝙨𝙚𝙙 𝙖𝙞𝙧 𝙨𝙮𝙨𝙩𝙚𝙢 𝙞𝙣 𝟮𝟬𝟯𝟬?

Compressed air regulation is getting stricter, smarter and more technical every year.

The real question is: who’s going to have the skills to run and maintain these systems by 2030?

From BCAS:

- Best intake of new apprentices since the programme launched in 2020, with new providers and 100% positive feedback on onboarding
- New DipCAM framework: flexible compressed air management units (Award, Certificate, Diploma) mapped to professional accreditation
- NVQ progression, CSCS cards and an HNC‑level pathway all being explored

We’re finally building a clearer career path for people who want to specialise in compressed air – not just “fell into it by accident”.

If you run multiple sites, you’re probably buying training anyway. Using the BCAS platform just means industry‑specific content, backed by the trade association, discounted for you (if accessed via Airmech).

If you’d like the training route I currently recommend for maintenance teams who own compressed air on site, comment TRAINING and I’ll send you a simple map.

BCAS Conference Debrief (4/5): Performance Verification – not all data sheets agree with realityOne of the most encourag...
06/05/2026

BCAS Conference Debrief (4/5): Performance Verification – not all data sheets agree with reality

One of the most encouraging updates from BCAS for me was the Performance Verification Programme.

Quick status:

- Round 1 (7.5 kW fixed speed) is 99% complete with 11 brands participating.
- Round 2 (11 kW variable speed) is underway at TÜV East Kilbride.
- Round 3 (22 kW variable speed) is planned for July 2026.

Why this matters more than another logo on a brochure:

- It gives buyers and specifiers a way to see independent, like‑for‑like performance data instead of trusting marketing claims.
- It will make it harder to hide behind “up to X% energy saving” statements that never materialise on site.
- Over time, it should reward manufacturers who build genuinely efficient machines rather than clever catalogues.

For end users, this is the gap between:

“We hope this compressor will save energy”
and
“We can show you it has.”

If you’d find a short buyer’s guide useful on how to use the PVP data when speccing compressors and dryers, comment PVP and I’ll share a draft.

𝘽𝘾𝘼𝙎 𝘾𝙤𝙣𝙛𝙚𝙧𝙚𝙣𝙘𝙚 𝘿𝙚𝙗𝙧𝙞𝙚𝙛 (𝟯/𝟱): 𝘾𝘽𝘼𝙈 – 𝙩𝙝𝙚 𝙚𝙣𝙙 𝙤𝙛 “c𝙝𝙚𝙖𝙥 𝙖𝙣𝙙 𝙘𝙝𝙚𝙚𝙧𝙛𝙪𝙡” 𝙘𝙤𝙢𝙥𝙧𝙚𝙨𝙨𝙤𝙧𝙨?Carbon Border Adjustment Mechanism (CB...
05/05/2026

𝘽𝘾𝘼𝙎 𝘾𝙤𝙣𝙛𝙚𝙧𝙚𝙣𝙘𝙚 𝘿𝙚𝙗𝙧𝙞𝙚𝙛 (𝟯/𝟱): 𝘾𝘽𝘼𝙈 – 𝙩𝙝𝙚 𝙚𝙣𝙙 𝙤𝙛 “c𝙝𝙚𝙖𝙥 𝙖𝙣𝙙 𝙘𝙝𝙚𝙚𝙧𝙛𝙪𝙡” 𝙘𝙤𝙢𝙥𝙧𝙚𝙨𝙨𝙤𝙧𝙨?

Carbon Border Adjustment Mechanism (CBAM) sounds like one of those Brussels acronyms you can safely ignore.

You probably can’t.

Headline from BCAS:

The EU has pushed full CBAM implementation back to Dec 2027.
The UK is likely around Dec 2028 with its own enforceable process.
CBAM is designed to stop carbon leakage – where manufacturing moves to lower‑standard countries and we just import the emissions back in finished goods.

Why it matters for compressed air:

Imported compressors, vessels and related equipment will carry a carbon price tag, not just a purchase price.
Large corporates will throw compliance teams at this. SMEs won’t. Yet SMEs will still be expected to declare and document embedded carbon correctly.
“Cheap” imports with poor data and weak support may become administratively expensive and risky choices.
The buying question quietly shifts from “How cheap can we get this?” to “Who can keep us compliant without giving our QSHE manager a breakdown?”

If you’d like a simple list of CBAM questions to start asking your compressor suppliers, comment CBAM and I’ll send it over.

𝘽𝘾𝘼𝙎 𝘾𝙤𝙣𝙛𝙚𝙧𝙚𝙣𝙘𝙚 𝘿𝙚𝙗𝙧𝙞𝙚𝙛 (𝟮/𝟱): 𝙋𝙁𝘼𝙎 – 𝙩𝙝𝙚 𝙝𝙞𝙙𝙙𝙚𝙣 𝙧𝙞𝙨𝙠 𝙞𝙣 𝙨𝙚𝙖𝙡𝙨 𝙖𝙣𝙙 𝙨𝙥𝙖𝙧𝙚𝙨PFAS (“forever chemicals”) usually gets talked ...
30/04/2026

𝘽𝘾𝘼𝙎 𝘾𝙤𝙣𝙛𝙚𝙧𝙚𝙣𝙘𝙚 𝘿𝙚𝙗𝙧𝙞𝙚𝙛 (𝟮/𝟱): 𝙋𝙁𝘼𝙎 – 𝙩𝙝𝙚 𝙝𝙞𝙙𝙙𝙚𝙣 𝙧𝙞𝙨𝙠 𝙞𝙣 𝙨𝙚𝙖𝙡𝙨 𝙖𝙣𝙙 𝙨𝙥𝙖𝙧𝙚𝙨

PFAS (“forever chemicals”) usually gets talked about in frying pans and waterproof jackets.

At the BCAS conference, the focus was on where PFAS quietly sits in compressed air systems.

Here’s the short version:

PFAS chemistry underpins many high‑performance sealing materials: Viton, Kalrez and some PTFE‑based products in rotating machinery.

The European process has moved past risk assessment and into socio‑economic assessment – they know the risk, now they’re weighing how painful removal will be.

The current proposal is very broad, which is why BCAS is pushing for a more granular, application‑based approach.

Without that nuance, we risk losing critical sealing solutions before realistic alternatives are in place.

If you run multiple sites, the practical risk is simple:
You could be fitting equipment today that depends on sealing materials which may be heavily restricted tomorrow.

👉 Comment PFAS and I’ll send you a short, plain‑English summary you can hand to maintenance, reliability or purchasing teams.

𝘽𝘾𝘼𝙎 𝙎𝙥𝙧𝙞𝙣𝙜 𝘾𝙤𝙣𝙛𝙚𝙧𝙚𝙣𝙘𝙚 𝘿𝙚𝙗𝙧𝙞𝙚𝙛 (𝟭/𝟱): 𝙁‑G𝙖𝙨 𝟮𝟬𝟮𝟳 – 𝙖𝙧𝙚 𝙮𝙤𝙪𝙧 𝙙𝙧𝙮𝙚𝙧𝙨 𝙧𝙚𝙖𝙙𝙮?Most sites still treat F‑Gas as an “air con pro...
28/04/2026

𝘽𝘾𝘼𝙎 𝙎𝙥𝙧𝙞𝙣𝙜 𝘾𝙤𝙣𝙛𝙚𝙧𝙚𝙣𝙘𝙚 𝘿𝙚𝙗𝙧𝙞𝙚𝙛 (𝟭/𝟱): 𝙁‑G𝙖𝙨 𝟮𝟬𝟮𝟳 – 𝙖𝙧𝙚 𝙮𝙤𝙪𝙧 𝙙𝙧𝙮𝙚𝙧𝙨 𝙧𝙚𝙖𝙙𝙮?

Most sites still treat F‑Gas as an “air con problem”.

After last week’s BCAS conference, it’s very clearly a compressed air dryer problem too.

Here’s the short version:

From 1 Jan 2027, the EU will heavily restrict high‑GWP HFCs – that hits most gases currently used in refrigerated dryers.

The UK will likely follow a similar path, and European product ranges will drive what we can actually buy anyway.

Germany has already asked for a 5‑year exemption for compressed air dryers, which shows how disruptive this could be.

Quotas are based on CO₂ equivalent, so moving to lower‑GWP refrigerants is the only sustainable way to keep volume.

If you run multiple sites and don’t know what gas is in your dryers (or your customers’ dryers), you’re heading toward 2027 with no dashboard.

👉 Comment F‑GAS and I’ll send you a 1‑page checklist you can use across your sites or with your customers.

24/04/2026

If you’re a Facilities Manager, compressed air is probably not your favourite topic.

It’s just another risk and another contractor… until it goes wrong at the worst possible moment.

The FMs who sleep best at night all want the same three things from their compressed air provider:

→ No surprises on uptime
→ No surprises on compliance
→ No surprises on cost

That’s how we run things at Airmech:

One engineer who actually knows your site
Planned maintenance and energy audits
PSSR / WSE and service reports your auditor or insurer will accept
Fixed, agreed pricing
Your job isn’t to be a compressed air expert. It’s to have one folder and one phone number you can point to.

If your current provider gives you surprises instead of certainty, DM me “FM” and I’ll send you the checklist we use when we take over a new site.

23/04/2026

Your compressed air system is probably wasting 20 - 40% of the energy it uses.

Not because it’s badly engineered.
Because of leaks, oversized kit, pressure drops, and compressors running when nobody’s producing.

An Airmech energy audit looks at four things:

→ Leaks: Where air is escaping. Most sites have leaks they don’t know about.
→ Pressure: What pressure you actually need vs what you’re running.
Even 1 bar higher than needed = roughly 7% of your energy bill.
→ Run hours: When your compressor is running when it shouldn’t be.
Nights, weekends, lunch breaks, idle production.
→ Sizing: Whether your kit is the right size for what you actually use now.

The audit takes around half a day on site.

You get a written report with:

Leak points marked
Energy cost estimates
A priority action list in plain English
Most sites recover the cost of the audit within about 60 days from the savings alone.

If your last compressed air energy audit was more than 2 years ago, or you’ve never had one, it’s worth a conversation.

DM me “AUDIT” and I’ll sort it.

21/04/2026

Most compressed air failures are predictable.
They’re also preventable.

The machines that “suddenly” break down at the worst possible moment almost never fail without warning.
The warnings are just ignored.

A proper PPM contract with Airmech includes:

→ Scheduled servicing to manufacturer intervals
→ Oil and filter changes before they become a problem
→ Full system health checks, not just the compressor
→ Performance tracking so we can see issues developing
→ One number to call when something does need attention

We run PPM contracts nationally, regionally, and across dozens of single-site operations.
Same standards everywhere. Fixed pricing. No surprises.

In 2025, our PPM customers on multi-site contracts saw a 43% reduction in repeat faults compared to their previous providers.

If your current maintenance is reactive, you’re paying for emergencies.
If it’s proactive, you’re paying for uptime.

If you’re responsible for a site and want to move from “firefighting” to planned uptime, DM me “PPM” and I’ll send you our coverage map.

20/04/2026

I found a service sheet from 1987 at the weekend.

On it, in my grandad’s handwriting:

“Customer very pleased. Asked for same engineer next visit.”

40 years later, we are still doing the same thing.

Same engineer. Same standards. Same promise.

Last year I took on a client who told me:

“I just want the same person to know my site. I’ve had 14 different engineers from my last provider in 3 years.”

14 engineers. 3 years.

That is not service. That is lottery.

Compressed air is not a one-off transaction. It’s a relationship:

with your equipment
with your production line
with the people who keep it running
My grandad understood this in 1987. I’m trying to protect it in 2026.

People trust people. Not call centres.

If your provider sends someone new every time, that’s the first thing I would change.

If you’re responsible for a site and want one engineer who actually knows your plant, send me a message and I’ll show you what that looks like in practice.

Address

Anker Court Alliance Close
Coventry
CV116SD

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+442476345658

Website

Alerts

Be the first to know and let us send you an email when Airmech Compressed Air Engineers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share