AMOB UK

02/06/2026

Designed for high-integrity tube bending applications.
The AMOB CH 120 Booster Series is built for industries such as HVAC, refrigeration, ventilation, and heat exchanger manufacturing, where bend quality, ovality control, and wall thickness consistency are critical.

The booster system integrates directly with the follower pressure die, while a secondary clamp behind the pressure die assist helps maintain tube stability throughout the bending cycle.

The result is tighter control over ovality and wall thinning, helping manufacturers produce high-quality bends suitable for demanding pressure-tested applications.
Built for production environments where consistency and repeatability matter.

28/05/2026

𝗙𝘂𝗹𝗹𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗶𝗰 𝘁𝘂𝗯𝗲 𝗯𝗲𝗻𝗱𝗶𝗻𝗴, 𝗯𝘂𝗶𝗹𝘁 𝗳𝗼𝗿 𝗺𝗼𝗱𝗲𝗿𝗻 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗲𝗻𝘃𝗶𝗿𝗼𝗻𝗺𝗲𝗻𝘁𝘀.
The AMOB eMOB 2 Bend Series combines high-accuracy CNC tube bending with the efficiency and consistency of fully electric operation.

Without hydraulic systems, the machine delivers smooth axis control, excellent repeatability, lower energy consumption, and reduced maintenance requirements compared with traditional hydraulic alternatives.

Key benefits include:
▪ Lower operating costs
▪ No hydraulic oil or hydraulic maintenance
▪ Consistent bending performance across long production runs
▪ Quiet, clean operation

Designed for manufacturers looking to improve efficiency, control, and repeatability in demanding tube bending applications.

https://amob.co.uk/product/right-and-left-fully-electric-cnc-tube-bender/

26/05/2026

Complex tube bending, completed in a single cycle.
The AMOB eMOB 52 2 Bend combines fully electric tube bending with integrated punching, compound bending, and multi-level operations, reducing handling, setup time, and unnecessary tool changes.

Its multi-tool configuration allows complex components to be produced more efficiently while maintaining the accuracy and repeatability required for high-spec production environments.

Built for manufacturers looking to reduce cycle times without sacrificing precision, the eMOB 52 2 Bend gives operators greater control and flexibility across demanding bending applications.

21/05/2026

𝗔𝗻𝗼𝘁𝗵𝗲𝗿 𝘀𝘂𝗰𝗰𝗲𝘀𝘀𝗳𝘂𝗹 𝗔𝗠𝗢𝗕 𝗨𝗞 𝗶𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲𝗱. 🇬🇧
Our engineering team has just finished commissioning this AMOB CH-120 CN2 tube bending machine, now fully installed, tested, and ready for production.

With 120mm tube capacity, the CH series is built for demanding applications involving heavy-wall tube, larger diameters, and high-strength materials, while maintaining the accuracy and repeatability needed for production work.

A big thank you to our service engineers for another smooth installation, including on-site training to make sure the customer’s team was confident and ready to get started from day one.

The CH series continues to prove itself as a reliable solution for heavy-duty tube bending applications across UK industry.

Read more:
https://amob.co.uk/120mm-tube-bending-amob-ch-120-cn2-installed-in-uk/

Read about the successful installation and commissioning of the heavy-duty AMOB CH-120 CN2 pipe bending machine with 120mm capacity in the UK

20/05/2026

𝗕𝘂𝗶𝗹𝘁 𝗳𝗼𝗿 𝗱𝗲𝗺𝗮𝗻𝗱𝗶𝗻𝗴 𝘁𝘂𝗯𝗲 𝗯𝗲𝗻𝗱𝗶𝗻𝗴 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 𝗶𝗻 𝘁𝗵𝗲 𝗻𝗮𝘃𝗮𝗹 𝘀𝗲𝗰𝘁𝗼𝗿.
The AMOB eMOB-150 is designed for complex bending work where accuracy, repeatability, and reliability are critical. From heavy-wall tube to challenging geometries, it delivers the control and consistency needed for high-spec marine and naval manufacturing.

AMOB UK continues to grow its presence within the maritime industry, supporting customers who rely on CNC tube bending technology for high-performance production environments.

Fully electric, highly accurate, and built for serious industrial applications.

14/05/2026

𝟱𝟯 𝘁𝗼𝗻𝗻𝗲𝘀 𝗼𝗳 𝗳𝘂𝗹𝗹𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗶𝗰 𝘁𝘂𝗯𝗲 𝗯𝗲𝗻𝗱𝗶𝗻𝗴 𝗽𝗼𝘄𝗲𝗿. 🇬🇧
We’ve just completed Factory Acceptance Testing for another AMOB eMOB-225, and the machine performed exactly as expected. During testing, we were bending 219mm OD x 6.3mm wall carbon steel tube with exceptional accuracy and repeatability.

It was great to welcome the team from Navantia UK to the factory to see the machine in action before delivery to Appledore.

The eMOB-225 is the largest fully electric tube bender in the AMOB range, built for demanding applications where consistency, control, and repeatability matter.

We’re looking forward to seeing this machine officially installed and in production in the UK.

www.amob.co.uk

12/05/2026

When the team at Car S.O.S. needed to tackle a tricky fabrication job, they turned to AMOB technology to get it done right. 🇬🇧

We can finally share that one of our AMOB daily workhorses played a part in the restoration of a classic Nissan Pulsar GTI-R, featured on the popular show.
The challenge was to produce a bespoke catalytic converter and front pipe assembly, including a tight 1D bend on 63.5mm tube, where precision really matters.

In high-performance automotive restoration, there’s very little margin for error, and this clip shows exactly why AMOB machines are trusted for demanding tube bending applications around the world.

Watch the segment here:
https://youtu.be/WgOrzcFfF2k

When the team at Car S.O.S. needed to tackle a tricky fabrication job, they turned to AMOB technology to get it done right. 🇬🇧We can finally share that one...

30/04/2026

𝗙𝗿𝗼𝗺 𝗼𝘂𝗿 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗳𝗹𝗼𝗼𝗿 𝗶𝗻 𝗣𝗼𝗿𝘁𝘂𝗴𝗮𝗹 𝘁𝗼 𝘁𝗵𝗲 𝗵𝗲𝗮𝗿𝘁 𝗼𝗳 𝗨𝗞 𝗶𝗻𝗱𝘂𝘀𝘁𝗿𝘆 🇵🇹✈️🇬🇧
We’ve successfully completed the Factory Acceptance Test for a custom-built eMOB-32 LR, ready for one of our UK customers. The AMOB UK team joined us at HQ to make sure every detail was signed off to exacting standards.

This fully electric Left & Right bender is now packed and on its way.

Built at our factory, signed off with our UK team, and ready to go straight into production.

Looking for UK-based support backed by world-class production?

Get in touch: amob.co.uk

28/04/2026

𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆 𝗵𝗮𝘀 𝗮 𝗻𝗲𝘄 𝗻𝗮𝗺𝗲: 𝗲𝗠𝗢𝗕 𝟯𝟮
Our fully electric CNC tube bender is built for those who don’t want to choose between speed and sustainability. With lower energy use and no hydraulic maintenance, the eMOB 32 delivers:

✔ Extreme precision, with consistent repeatability
✔ Reduced waste, thanks to spring-back compensation software
✔ Quiet operation, for a cleaner, more productive workspace Reliable, efficient, and built to perform.

Want the full technical specs? Visit amob.co.uk

24/04/2026

𝗠𝗔𝗖𝗛 𝟮𝟬𝟮𝟲 𝘄𝗮𝘀 𝗮 𝗵𝘂𝗴𝗲 𝘀𝘂𝗰𝗰𝗲𝘀𝘀!
A massive thank you to everyone who visited the AMOB UK stand at MACH 2026.

The level of interest in our eMOB all-electric technology and integrated inspection with Hexagon systems made it an incredible week!

A huge thanks to all the AMOB UK staff that made it all run so smoothly!

Missed us at the show? Let’s keep it going. If you’ve got a bending or metalforming project coming up, get in touch and we’ll pick it up from here.

See you at the next show!