Laser UK

09/02/2019

https://www.laser-uk.co.uk

Laser UK brings you an advancement in the world of display lasers with Innovative technologies that supersedes any other in the current market, saving both time and money.

09/02/2019

In today’s industries there’s a need for E-Stop systems to be incorporated into a lot of applications. The RE-STOP wireless emergency stop system which works on the 868mhz frequency (other frequencies available for other countries) range and can provide a safety link that can make any laser or control situation or other potential hazards safe at the press of a button.

09/02/2019

The Control & Power Distro unit has two levels of E-Stop a 50% kill which will activate the open condition on the interlock input and a“ 100% kill which kills total power to the system. The 50% kill is a CATEGORY 2 which is not classed as an E-Stop but is built into the laser systems by manufacturers. The 100% kill is a CATEGORY 0 which is the highest level of E-Stop and will stop everything connected to it. Both of the E-Stops are switched via independent relays which are rated at 277VAC @ 20A & 30VDC @ 20A.

09/02/2019

The SNAKE-POE Loom consists of H07RN-F Power cable, Van Damme Tour grade DMX and Tour grade CAT5e all protected and kept together by a tough flexible nylon braid. On each end is the industry standard Powercon, DMX & Ethercon connectors to make connectivity even easier.

09/02/2019

The FB4-POE enclosure takes the FB4 controller to another level. Incorporating industry-standard ILDA connection and power and controlled delivered via Power Over Ethernet technology.

The controllers can be supplied with or without FB4 controllers