ShonDynamics

ShonDynamics ShonDynamics makes advanced fluid dynamics easy for engineers. Request a trial: https://shondynamics.de/contact/

Our proprietary solvers deliver accurate results in hours, not weeks - ideal for challenges like gearbox lubrication and liquid tank sloshing.

08/06/2026

Luca Dennig is back with another feature presentation!

shonDy's particle refinement feature lets you focus computational resolution exactly where precision counts. In critical zones, particle diameter is halved - splitting one large particle into 8, which dramatically sharpens simulation results locally, without inflating runtime across the board.

In this walkthrough, Luca demonstrates three application methods:

🔲 Fixed cuboid or cylindrical region - refinement stays in place
🎯 Solid selector - refinement follows chosen components (wheels, chassis)
🔲🎯 Combination - a region locked to a moving solid

The difference in output quality is immediately visible. Red particles = base resolution. Blue particles = refined zones.

🔗 Try it yourself: shondynamics.de/contact

Thermal failure in an electric drive unit doesn't announce itself. It builds - winding by winding, contact by contact - ...
05/06/2026

Thermal failure in an electric drive unit doesn't announce itself.

It builds - winding by winding, contact by contact - until something gives up.

This case study shows how coupling shonDy and shonTA gives EDU engineers a complete picture of what's happening thermally across the full system.

captures lubrication and oil distribution inside the EDU.
translates that into a 1D thermal flow network connected to a 3D model, tracking temperatures from the windings to the housing.

The results flag exactly where critical thresholds are approached, and what design changes bring them back into range.

👉 Swipe through or explore the full case: https://shondynamics.de/case-studies/shondy_shonta_particle-based-lubrication-and-1d-thermal-simulation/

03/06/2026

One setup tip that makes your water wading simulation significantly more stable.

--> Moritz shares the approach he recommends to every customer: don't apply velocity at t=0. Let the simulation settle for 1 second first, then gradually accelerate the vehicle to its target speed.

🎥 Check out the full deep dive for more learnings: https://www.youtube.com/watch?v=Ud3AkW_hd1o

01/06/2026

Geometry complexity should guide your collision model - not the other way around.

In this clip from our water wading Deep Dive, Moritz explains the trade-off between direct mesh collision and simplified geometry models in shonDy.

For complex shapes, mesh collision gives you precision. For simpler geometries like a tire, a cylinder is faster, leaner, and more accurate than necessary.

Small setup decisions - big impact on simulation speed!

🎥 Watch the full deep dive for more insights: https://www.youtube.com/watch?v=Ud3AkW_hd1o

Free-surface is becoming a necessity, and that’s exactly where delivers.This carousel gives a quick walkthrough of w...
29/05/2026

Free-surface is becoming a necessity, and that’s exactly where delivers.

This carousel gives a quick walkthrough of what makes shonDy one of the most capable meshless tools for engineering teams:

✔️ Mesh-free particle-based fluid dynamics - ideal for splashing, spraying, lubrication, and moving boundaries
✔️ Multi-physics support - from gearbox lubrication to motor cooling and liquid sloshing
✔️ Large-scale simulation at speed - millions of particles, massive parallel computing
✔️ + support - flexibility for development and large engineering workloads

Explore it yourself by requesting a trial at shondynamics.de/contact

27/05/2026

Water wading isn't just a combustion engine problem anymore.

In this clip, we define the wading capability metric - the vertical distance between the tire contact point and the air intake - and explain why it's equally critical for EVs.

For electric vehicles, the risk zones shift: charging port, battery cooling systems, and power electronics.

A flooded intake is one problem. A flooded battery pack is another.

🎥 Full deep dive: https://www.youtube.com/watch?v=Ud3AkW_hd1o

25/05/2026

You don't need a supercomputer to run serious CFD.

In this clip from our water wading Deep Dive, Moritz breaks down exactly what hardware shonDy runs on --> GPU, CPU, standard desktops, and HPC systems alike.

Every single case in the session runs on his personal workstation, with a typical runtime of 1 to 5 hours!!

That's industrial-grade simulation without industrial-grade infrastructure.

🎥 Catch the full deep dive: https://www.youtube.com/watch?v=Ud3AkW_hd1o

22/05/2026

In our latest deep dive on water wading Deep Dive, Moritz Schenk walks through how shonMesh and shonDy work together from preprocessing all the way to the particle solver - showing exactly where the real engineering excitement happens.

🎥 Watch the full deep dive here: https://www.youtube.com/watch?v=Ud3AkW_hd1o

FAQ Series #5 - Are all products available as standalone solutions?Yes, and they're also designed to work together. 🔗Ea...
20/05/2026

FAQ Series #5 - Are all products available as standalone solutions?

Yes, and they're also designed to work together. 🔗

Each shonDynamics product can be purchased and used independently. At the same time, they're built to integrate:

🔧 shonMesh → prepares your geometry
💧 shonDy → runs the particle-based fluid simulation
🌡️ shonTA → handles the thermal analysis

Use one. Use all three. The workflow scales with your needs.

Explore more: https://shondynamics.de

FAQ Series #4 - How quickly can a simulation be set up and started?The speed of setup depends on the tool, and we desig...
18/05/2026

FAQ Series #4 - How quickly can a simulation be set up and started?

The speed of setup depends on the tool, and we designed ours with that in mind. ⚡

With , you get:

➡️ A smooth workflow with a deliberately gentle learning curve
➡️ A step-by-step user manual guiding you through your first case setup
➡️ A built-in library of example cases in shonDy and shonTA, so new users can start from working setups.

You don't need weeks of onboarding to run your first meaningful simulation.

Got a question about getting started? Drop it in the comments 👇

Address

Waldstraße 85

Opening Hours

Monday 08:00 - 19:00
Tuesday 08:00 - 19:00
Wednesday 08:00 - 19:00
Thursday 08:00 - 19:00
Friday 08:00 - 19:00

Telephone

+4972146722994

Website

Alerts

Be the first to know and let us send you an email when ShonDynamics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Want your business to be the top-listed Equipment Service?

Share