20/09/2017
📣📣📣double shaft concrete mixer
Double shaft concrete mixer can produce all kinds of powder mixing materials, including wet fly ash, calcium carbide mud, phosphogypsum, gravel, slag and so on. It is mainly used for all kinds of standard bricks, lime sand brick production line and other supporting host.
The installation of double shaft concrete mixer
1. Before starting, first check the rotating part and the material barrel whether the scratch phenomenon, if there is a scratch phenomenon, it should be adjusted in time.
2. Clean the sundries in the cylinder.
3. Before starting the cylinder limit to start.
4. The direction of rotation of the mixing shaft shall be indicated by the end face of the barrel.
5. Concrete materials must be removed from the metal or other debris.
6. Adjust the timing of the mixer according to the mixing time, and pay attention to the adjustment in the case of power failure.
7. Press the start button, the spindle drives the stirring operation.
8. Automatic shutdown after setting time.
9. When unloading, should stop, open the lock pin, press and hold down the key, so that the cylinder can rotate to a certain position, then the locking pin positioning spindle rotation, so that the mixture out of the tube.
10. Press the up key row mixes the cylinder reset, mixing cylinder with locking pin positioning.
11. The cleaning cylinder can be poured into the water tank, so that the main shaft rotating wash, dry sand can also be used to clean.
☎️☎️☎️☎️☎️☎️☎️
Website: chinaconcretemixer.net/
Or: http://concretemixermachine.cn/
Email:[email protected]
