STAVN Sorting

Name: STAVN Sorting
Address: 1-908, 333 East Jincheng Road, Wuxi, 214000, CN
Telephone: +8651083108318

Home
China
Wuxi
STAVN Sorting

STAVN specialize in municipal solid waste separation and recycling solutions and equipment.

With a team with over 20 years know-how and global experience, STAVN is confident to offer practical and reliable waste recycling solutions.

14/06/2023

Air separator used for the separation of light and heavy materials has the following advantages:
1) Wind power is recycled, the system is slightly negative, and environmental pollution is small.
2) The resistance is small and the energy consumption is reduced. The air flow design is very smooth, conforms to the laws of fluid mechanics, and has the shortest path. The residual energy of centrifugal separation particles is converted into exhaust air pressure through the volute, which reduces the resistance of the system, and the air pressure demand of the fan is significantly reduced, and the power of the configured motor is significantly reduced.
3) The highest degree of equipment integration. Compared with the system with the same capacity, the footprint and height are the smallest.
4) The efficiency of light and heavy materials is high. The placement and use of the relay drum shortens the necessary distance for material blowing, reduces the cross section of the wind action, and strengthens the wind action, so that the material still falls on the heavy material output conveyor after the wind action is attenuated.
5) Because the centrifugal sedimentation device has the ability to separate dust, the wear of the fan impeller is greatly reduced, thereby maintaining the dynamic balance of the equipment.
🌐For more information about STAVN: www.stavn.cn
✉Contact us if you are interested: [email protected]

07/06/2023

☆ Brochure_STAVN
Download:https://www.stavn.cn//upload/202302/15/Brochure_STAVN.pdf
🌐For more information about STAVN: www.stavn.cn
✉Email: [email protected]

02/06/2023

Automated garbage sorting techniques can be categorized into two types: direct sorting and indirect sorting.

Direct sorting techniques utilize material properties like magnetic susceptibility, electrical conductivity and density for heavy media by applying external fields like , eddy current and gravity respectively.

Indirect sorting, on the other hand, employs sensors to detect the presence and often the location of recyclables in the waste so that automated machines or robots can be employed to sort the detected recyclable materials.
🌐For more information about STAVN: www.stavn.cn
✉Email: [email protected]

22/05/2023

Dry garbage comprises of paper, metallic garbage, plastic, etc. - anything which can be kept for quite a long time. Wet garbage comprises of organic material like vegetable peels and fruit garbage which can be made into compost. The treatment of wet garbage could produce compost and biogas. Biogas could be used as an alternative renewable source of energy which can be used in households. The compost obtained in the treatment of wet garbage could be offered to farmers at a cheaper rate. This could reduce the use of fertilizers in farming which increases the quality of soil and the produce obtained. The dry garbage collected should be sent for further by which materials can be recycled or reused.
For more information about STAVN: www.stavn.cn
Email: [email protected]

20/04/2023

Waste sorting plants receive municipal solid waste in the city and process it in several stages. The waste sorting process is at the heart of a waste sorting plant. The sorting system equipment consists of primary , , , , , , PLC control system and so on. Using a variety of selection machines, we could get organics, plastic, metals, brick, stone out of the commingled garbage with high efficiency.

Outputs from Sorting:
◆ Plastics: recycle for reuse in lower quality requirement application;
◆ Metals: recycle for reuse;
◆ Organics: further processed into fertilizer by composting or biogas by anaerobic digestion;
◆ Combustibles: further processed into RDF (refuse derived fuel) for energy conversion;
◆ Inert: landfilling.

For more information about STAVN: https://www.stavn.cn
Contact us if you are interested: [email protected]

14/04/2023

The will be designed to handle the specific materials that they will encounter. Thus, the sunken conveyors that initially accept the waste will be designed differently than conveyors that are only transporting a specific material. Sensors and computers will automatically control the speed of each conveyor to adjust the depths of the feed and adapt to manual sorting rates. The conveyors will be durable, self-cleaning and designed to handle heavy loads so that the system will be able to process any type of waste composition.
For more information: https://www.stavn.cn
Contact us: [email protected]

07/04/2023

Conveyor lines are used to transport materials to and from mechanical equipment within the . In addition, flat belt conveyors will be used at the garbage sorting stations since they permit easy access to the materials on the belts. Belt conveyors will be the most common types of conveyors utilized in the facility since they can effectively transport materials up steep inclines and are extremely versatile.
For more information about STAVN Sorting: www.stavn.cn
Contact us: [email protected]

31/03/2023

A materials recovery facility ( ) accepts materials, whether source separated or mixed, and separates, processes and stores them for later use as raw materials for remanufacturing and reprocessing. The main function of the MRF is to maximize the quantity of recyclables processed, while producing materials that will generate the highest possible revenues in the market.

29/03/2023

The process of waste sorting system is showed in the video.
Waste sorting plants sit between collection infrastructure on one side and material markets and disposal on the other.

The exact configuration of a sorting plant is largely dependent on the planned input, the desired output, and the level of technology and financing available.

Waste sorting plant demand a critical and steady mass of input waste material to be financially viable. As such, they are often extra municipal or regional, serving multiple municipalities from a central location to ensure long-term economic viability.

24/03/2023

A significant issue in the operation of the is the choice between mechanical or manual separation techniques.

Because of the high nature of labor costs, most long-term cost analyses will typically show that automated processing is more cost-effective than manual processing.

16/03/2023

A bucket loader pushes recyclables onto in-feed conveyors to move the recyclables into the waste sorting system. A horizontal is typically placed below grade so that recyclables can be slid onto the conveyor. For dual steam , separate in-feed conveyors are dedicated to commingled containers and fiber. In single stream MRFs, both containers and fibers are pushed onto the same in-feed conveyor. The horizontal conveyor connects to an incline conveyor that runs at a slightly faster speed to spread out the material.

10/03/2023

A MRF is a processing facility where materials are sorted and prepared for marketing either to end users (manufacturers) or to other facilities for additional processing. Configuration of the MRF processing line will vary depending upon how materials are received. MRF is waste sorting plant as well. Municipal solid waste will be sorted in .

Address

1-908, 333 East Jincheng Road
Wuxi
214000

Telephone

+8651083108318

Website

https://www.stavn.cn/

Alerts

Be the first to know and let us send you an email when STAVN Sorting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to STAVN Sorting:

Shortcuts

Want your business to be the top-listed Equipment Service in Wuxi?