Suzhou Boarding/Bottle&Flask Machinery

Suzhou Boarding/Bottle&Flask Machinery Helping build Stable & Efficient Vacuum Bottle Lines | From Tube Making to Finishing
🌍 | www.szboarding.com

20/08/2026

Double Station Cnc-Trimming Machine

In vacuum bottle production, the top and bottom ends may require further machining after the previous forming processes.

The Double Station Cnc-Trimming Machine is designed for one-time turning of the cup mouth and bottom flat surfaces.

With four-axis linkage, the machine can process both ends of the product in one operation. Its double-station worktable can run with alternating dual stations or operate as a single station depending on production requirements.

The spindle is controlled by a frequency converter with adjustable speed and fast braking. A PLC touch-screen interface and rotary switches are used for machine operation and control.

Instead of handling the two ends as separate machining steps, this machine is designed to process both the cup mouth and bottom surfaces in the same operation.

Feel free to message us for more details and specifications.

19/08/2026

Double Station Cnc-Spinning Machine

Bottle-mouth forming is more than simply reducing the diameter. The spinning and compressing process needs to be controlled throughout the forming operation.

The Double Station Cnc-Spinning Machine is designed for the spinning and compressing process of the cup pot mouth.

With a double-station configuration and CNC control, the machine is built specifically around the bottle-mouth forming process. According to the provided specifications, productivity is about 16 pcs/min, with 8 kW rated power and 0.5–0.8 MPa air pressure.

For vacuum bottle production, it provides a dedicated setup for the spinning and compression stage of the cup mouth.

Feel free to message us for more details and specifications.

18/08/2026

Three Spindle Cnc-Threading Machine

After the bottle mouth is formed, the outer shell may require thread rolling before moving to the next assembly process.

The Three Spindle Cnc-Threading Machine is designed for the screw rolling process of the cup pot shell mouth.

It uses a PLC touch-screen HMI, three-axis servo motors and precision reducers, while the transmission mold shaft ratio can be adjusted from 1:1 to 1:10 according to the processing requirements.

The machine is designed for products with a processing range of Φ20–Φ120 mm and wall thickness of 0.1–0.8 mm, with a listed productivity of about 7 pcs/min.

For vacuum bottle production, it provides a dedicated solution for the bottle-mouth thread rolling process.

Feel free to message us for more details and specifications.


17/08/2026

Extra rim after necking?

The Vertical Rim Scrap Cutting Machine is designed to cut the extra rim scrap left after bottle necking.

PLC + pneumatic control, adjustable tooling support and tool feeding position, plus a front scrap collection tank for easier waste handling.

A dedicated solution for the rim scrap cutting process in vacuum bottle production.

Message us for more details.

14/08/2026

Double Station CNC-Spinning Machine

Manual necking can be slow and difficult to keep consistent.
Our Double Station CNC-Spinning Machine combines dual stations and CNC control for efficient, flexible production with low vibration and noise.

12/08/2026

Bottom Disc Deformation? Get Stable Pressing Results

Bottom discs may deform or have inconsistent shapes due to unstable positioning and insufficient pressing control during production.

Our Power Press For Bottom Disc Making provides stable pressing, accurate positioning and durable structure, helping produce consistent bottom discs for cup manufacturing.

📩 Contact us for more machine details.

10/08/2026

Uneven Cup Cutting? Solve It with Laser Precision

Cup edges with burrs and uneven cuts often come from unstable positioning and limited height control during processing.

LASER SPLITTER uses PLC + touch screen control, 4-axis linkage and height tracking technology to process cup division, edge cutting, flat mouth and flat bottom with smooth, precise results.

📩 Contact us for more parameters.

07/08/2026

Bottle Mouth Deformation After Forming? The Problem May Come From The Shaping Process.

After stretching and forming, stainless steel cups may have slight deformation at the top or bottom area, affecting the next production process.

CNC Top and Bottom Shaping Machine is designed for top and bottom shaping of cups. The CNC control system manages the shaping process, reducing manual adjustment differences.

📩 Contact us for more machine parameters.

06/08/2026

Cup Mouth Deformation During Production? The Problem May Come From the Forming Process！

During cup pot mouth processing, unstable forming methods can affect the final shape of the opening.

Double Station CNC-Spinning Machine is designed for spinning and compressing the cup pot mouth. The CNC control system manages the processing process, while the variable frequency spindle system supports stepless speed adjustment and stop positioning.

Product Data:
Pressure: 0.5–0.8 Mpa
Rated Power: 8 KW
Net Weight: 2000 Kg

📩 Contact us for more machine parameters.

05/08/2026

Uneven Powder Coating? The Problem May Come From Manual Spraying！

Uneven coating thickness and different surface effects often happen when spraying depends too much on operator experience.

Power Coating Line uses spray equipment to control the powder spraying process, reducing the difference caused by manual operation and helping improve coating consistency.

The system is suitable for industrial coating applications where appearance and surface protection are required.

📩 Contact us for more machine parameters！

Address

Room 1604, Block E, Suzhou Bay Central Plaza, Wuzhong District
Suzhou
215100

Website

,

Alerts

Be the first to know and let us send you an email when Suzhou Boarding/Bottle&Flask Machinery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category