Caroline-Shijiazhuang An Pump Machinery

14/07/2026

⚙️ Struggling with high-cost high-pressure pumps for your refinery process units?
Our API 610 BB4 segmental multistage pumps are the cost-performance sweet spot for all medium-high pressure refinery working conditions!

✅ Where BB4 pumps shine in refineries:
• Hydrotreating / Hydrocracker feed pumps (100–250 bar, H₂S resistant NACE material)
• MDEA amine circulation pumps for desulfurization & decarbonization systems
• FCC recycle oil & side-stream extraction pumps for CDU/VDU units
• Medium-pressure injection & condensate boosting service pumps

Core advantages vs BB2 / BB5 models:
💰 30%–50% lower investment cost than barrel-type BB5 pumps
🔧 Segmented radial split design – no full pipeline disassembly during maintenance, cut downtime by over 60%
🛡️ Double-supported rotor + back-to-back impellers, ultra-low vibration & extended mechanical seal service life
💧 Low NPSHr design, effectively avoid cavitation under limited suction head on site
🌡️ Stable operation up to 210℃, compatible with crude oil, hot fuel oil & corrosive amine solvents

Tired of frequent unplanned shutdowns caused by unstable pumps?
Comment “REFINERY” below if you need our full performance parameter sheet, or send us a direct message for customized quotation!

14/07/2026

28/05/2026

AJY PULP PUMP

1. Paper Industry: Suitable for transfer paper pulp concentration max to 6%, and liquid cycle
transmission during base recovery processing, for lifting and pressing.

2. Sugar Industry: Suitable for transfer syrup max to 4%, and viscosity max 150 mm2/S.

3. Urban Sewage Treatment, Suitable for transfer sewage, waste water, for lifting and pressing

23/03/2026

Hey everyone! 👋
An Pump will be at Mining Türkiye 2026!
📅 April 8–11, 2026
📍 Istanbul Tüyap, Hall 10, Booth 1010G
Come meet our team & explore mining pump solutions! See you there!

Merhaba! 👋
An Pump, Mining Türkiye 2026 fuarında!
📅 8–11 Nisan 2026
📍 İstanbul Tüyap, 10. Salon, 1010G Standı
Ekibimizle tanışıp madencilik p***a çözümlerimizi keşfetmek için bekliyoruz! Görüşmek üzere!

26/02/2026

One-stop slurry pump solution

23/01/2026

High-Quality BP Immersion Pump for Global Industries🌍
Looking for a reliable solution for leak-free medium transportation? Our Immersion Pump is your best choice!

🌟 Core Advantages：

✅ Leak-proof design: Suitable for flammable, explosive, corrosive and toxic media

✅ Wear & corrosion resistant: Adapt to slurry, acid-base solution, crude oil, etc.

✅ Space-saving: Vertical structure, perfect for deep liquid tanks and narrow workshops

Widely used in environmental protection, chemical, petroleum, mining and other industries. Customizable material, pressure and flow rate to meet your specific needs.

DM us for quotation and technical parameters!
Caroline Yang
EMAIL:[email protected]
Tel：+8615333235185

23/01/2026

AJG Filter Press Pump
Main application areas are as follows:* **Environmental and Water Treatment:** Sludge dewatering in municipal wastewater treatment plants and industrial wastewater treatment stations (e.g., domestic sludge, chemical sludge, dyeing sludge).* **Mining and Metallurgy:** Slurry filtration in mineral processing plants (e.g., iron ore, copper ore, gold ore slurry), solid-liquid separation of metallurgical waste residue.* **Chemical and Fine Chemicals:** Filtration of crystallization mother liquor, reaction slurry, and chemical waste residue in chemical production.* **Coal and Coal Chemicals:** Coal slime dewatering in coal washing plants, sludge filtration in coal chemical wastewater.* **Food and Pharmaceuticals:** Waste residue from food processing (e.g., starch residue, fruit juice residue), pharmaceutical residue, solid-liquid separation of fermentation broth.* **Building Materials and Ceramics:** Filtration treatment of ceramic clay, cement production waste residue, and stone processing sludge.* **Electroplating and Surface Treatment:** Dewatering and filtration of electroplating sludge and pickling sludge.
Caroline Yang
EMAIL:[email protected]：+8615333235185

23/01/2026

API610 oil pumps are ready to ship!

A centrifugal pump factory with 40 years of experience offers free pump design solutions. Inquire now!

Caroline Yang
EMAIL:[email protected]
Tel：+8615333235185

21/01/2026