STP is the basic type among SH6000 high performance control valves. Metal-seated quick-changeable trim combination. Insensitive to impurities with low cavitation design. Fast and easy to maintain due to its rotational symmetry. This series is characterized by optional metal to metal sealing and PTFE-soft sealing supported by an additional Elastomer O-ring. STP series can be used in a wide range of applications, especially suitable for the fluid with entrained particle and larger temperature variety because it will not be locked.
Type: Cast globe Valve
Nominal Size: DN15, 20, 25, 32, 40, 50, 65, 80, 100,
150, 200, 250, 300, 350, 400
Nominal Pressure: ANSI 150, 300
DIN PN16, 25, 40
JIS 10K, 20K, 30K
GB PN1.6, 2.5, 4.0 MPa
End Connection: Fl**ge ANSI B16.5 RF, RTJ
DIN2543/2544/2545 RF
JISB2201 RF
JB/T81 RF
JB/T82.2 FM
Weld: ANSI B16.5 SW（DN≤50）; BW（DN＞50）
Face to Face Dimension:
ANSI150RF, JIS10K （IEC60534-3-1 37 Series）
ANSI300RF, JIS20K, JIS30K （IEC60534-3-1 38 Series）
ANSI150/300 RTJ （ASME B16.10 CLASS 150/300RTJ）
DIN PN16, 25, 40 （DIN3202-F1）
GB PN1.6, 2.5, 4.0 MPa （ISO5752 1 Series）
Please refer to table 6.1~6.4
Body Material：Please refer to table1 Please refer to figure 3 for Operated Temp. &Pressure Range
Bonnet Type：STD type……-46℃～200℃; 200℃～300℃
Radiation fin type……300℃～530℃
(Please pay attention to the different Temp. &Pressure Range of material)
Packing Material：PTFE V-ring compound packing、graphite compound packing、
graphite packing,
Operating Temp. &Pressure range is shownnn in table 2，figure2
Seal Gasket：Spiral wound gasket（PTFE+316、Flexible Graphite+316）,
Graphite with metal gasket（Graphite+316、Graphite+304）
Valve Trim
Plug Type：Parabolic column plug
Flow Characteristic：EQ%、Linearity、Quickly opening(Please refer to figure4)
Trim Material：Please refer to table 3 for STD material assembly，operated Temp. &Pressure Range
Actuator
Type：Multi-spring diaphragm
Air Supply：Max. 6bar
Ambient Temp.：-20℃~+80℃
Spring range：As shown in Table 5.1～5.5
Air Connection：G1/8（SA1）；G1/4（SA2）；G3/4（SA3）
STD Specification：As shown in Table 5.1～5.5
Accessory
Positioner，Filter-regulator valve，Solenoid valve，Limit switch，
Valve position Transmitter，Booster relay，Lock-valve，Handwheel，etc.
Action
Air to open，Air to close
Shanghai SanZhou Automation Dash Co., Ltd
Add: No.2651, Waiqingsong Road, Baihe Town
Qingpu District, Shanghai, 201709, P.R.C.
Tel: +86 21 59748861
Fax: +86 21 59747999
Mob:+8613897922094
E-mail:[email protected]
Web: www.szvalves.com
