https://abrasivetool.myshopify.com/

SATC abrasives, 1016# Dingxi Road, Shanghai (2026)

15/06/2026

One Disc, Two Materials: See the SATC Flap Disc Transform Metal & Wood

A good flap disc shouldn’t force you to switch tools every time you change materials. It should handle metal and wood with equal ease — leaving a smooth, consistent finish on both.
In the video below, we put the SATC Flexible Flap Disc (T27) to work on two very different surfaces:
🟢 Metal plate – removing surface rust, blending scratches, and prepping for coating.
🟢 Wood board – smoothing rough edges, removing old finish, and creating a uniform surface.
What Makes SATC Flap Discs This Versatile?
Feature Benefit
Premium abrasive grain options Aluminum oxide for general purpose , high hardness and toughness
Resin bond + fiberglass backing Durable, heatresistant, and longlasting
T27 flat type Ideal for both surface grinding and edge work

The “After” Results
Material Before After
Metal plate Rust, scratches, uneven surface Clean, smooth, ready for paint or coating — no heat discoloration
Wood board Rough grain, old finish, splinters Uniform texture, no gouging, ready for stain or varnish

Visit our website for full specs & free sample request:
https://www.satcabrasives.com/Flap-disc-aluminum-oxide/45quot-flap-disc-t27t29-40-60-80-120-grit-angle-grinder-sanding-grinding-wheels

09/06/2026

From Rough Edge to Perfect Finish: Watch the SATC T41 Ultra-Thin Cut-Off Wheel in Action
Body
A clean, precise cut on stainless steel isn’t just about looks — it’s about saving time, reducing waste, and getting the job done right.
In the video below, we put the SATC T41 Ultra-Thin Cut-Off Wheel to work on a stainless steel sheet. You’ll see:
🟡 Before – a solid piece of metal, ready to be cut.
🟡 The cut – fast, smooth, and controlled in one single pass.
🟡 After – a burr-free edge with no heat discoloration, no secondary deburring needed.
Why the SATC T41 Delivers This Level of Performance
Feature Benefit
1.0mm ultrathin thickness 30% less material loss compared to standard 2.5mm wheels
Premium abrasive Aluminum Oxide + White Fused Alumina Selfsharpening, aggressive cut, and no contamination on stainless steel
MPA certified & EN12413 standard Two layers of fiberglass mesh, reinforced safety at high speed (13,300 RPM)
Resin bond technology Extends service life by 25% – one disc can cut through a 16mm stainless steel bar 50+ times
Low vibration design Stable operation

Applications
Metal fabrication shops – cutting pipes, angles, sheets, and beams
Stainless steel work – food equipment, architectural metal, kitchen fabrication
Construction & site work – rebar, galvanized steel, conduit
Shipbuilding & repair – steel plates and marinegrade metals
Maintenance & repair – plant maintenance, automotive, general repair

Visit our website for full specs & free sample request: https://www.satcabrasives.com/Cutting-discs

24/05/2026

Strip Paint, Rust & Coatings — Without Damaging What’s Beneath

Aggressive coatings need aggressive removal. But most abrasive discs either clog up, wear out fast, or chew into the base material.

Enter the SATC Blue Poly Strip Disc — engineered to strip fast, last long, and stop where it should.
What Makes It Different?

⚫Silicon Carbide Abrasive: Extremely hard, sharp, and self-sharpening. Cuts through tough coatings like paint, rust, epoxy, and undercoating faster than conventional abrasives.
⚫Open Mesh Nylon Web: Debris falls through — the disc doesn’t clog. Consistent cutting power from first use to last.
⚫Blue Polyester Fiber Construction: Significantly outlasts standard black stripping discs. More durable, better value.
⚫Aggressive Yet Gentle: Removes coatings efficiently but stops on metal, wood, or fiberglass — no gouging, no surface damage.
Where to Use It
Automotive: Remove paint, undercoating, and body filler — prep for repaint without damaging sheet metal.
Woodworking: Strip lacquer, varnish, and paint from furniture and trim. Won’t gouge the wood.
Metal Fabrication: Remove rust, mill scale, and oxidation. Clean weld lines before or after welding.
Industrial Maintenance: Prep surfaces for new coatings, remove old epoxy, clean equipment.
Safety First
⚫Always wear gloves and protective goggles/face shield
⚫Do not exceed maximum RPM listed on the disc
⚫When installing, don’t over-tighten — can cause disc breakage

Visit our website for full specs & free sample request:
https://www.satcabrasives.com/Strip-disc/4039039-x-58039039-4-12quotx-78quot-5quotx-78quot-blue-poly-strip-disc-wheel-for-angle-grinder-for-removinglacquer-and-paint-coating-on-wood

17/05/2026

Drywall Sanding Without the Dust Storm. SATC Multi-Hole Discs Deliver Superior Dust Extraction

Sanding drywall is miserable when dust goes everywhere. You can’t see what you’re doing, you breathe it in, and cleanup takes longer than the job itself.

Meet the SATC 9″ Multi-Hole Drywall Sanding Disc — engineered to make drywall sanding cleaner, faster, and far less frustrating.

Why It Works
⚫Multi-Hole Design: More holes than standard discs. Pairs perfectly with your dust extraction system — dust gets sucked away before it can clog the surface or float into the air.
⚫White Fused Alumina Grain: Sharp, durable, and self-sharpening. Cuts fast through joint compound, paint, and fillers. Resists clogging, so the disc stays effective longer.
⚫Ultra-Dense Hook & Loop Backing: Grips your sander pad securely. No slipping, no falling off — even when you’re sanding overhead or at awkward angles.
⚫Resin Over Resin Bond: Heat-resistant bond keeps abrasive grains attached under heavy use. Longer disc life, consistent performance.
Perfect for Drywall Professionals
⚫Sanding joint compound on seams and corners
⚫Smoothing paint and fillers
⚫Prepping walls and ceilings for final coating
⚫Compatible with all 9″ (225mm) drywall sanders, long-reach sanders, giraffe sanders, ceiling sanders
Specifications
Specification Detail
Diameter 9″ (225mm)
Hole Pattern Multi-hole
Grit Range 40 – 220
Abrasive White Fused Alumina
Backing Hook & Loop
Bonding Resin over Resin
Grit Selection Guide
Grit Best For
40 # – 80 # Heavy stock removal — thick joint compound, old paint
100 # – 150 # Surface blending — smoothing filler, removing scratches
180 # – 220 # Fine finishing — ready-for-paint smoothness

Visit our website for full specs & free sample request:
https://www.satcabrasives.com/Drywall-sanding-disc/-9-in-premium-sanding-disc-multi-hole-hook--loop-drywall-sander-paper-80-grit

10/05/2026

From Dull to Razor Sharp — No Water, No Oil, No Mess

A dull knife is frustrating — and dangerous. But traditional sharpening stones need soaking, oiling, and constant maintenance.

Introducing the SATC 8″ Double-Sided Diamond Sharpening Stone — dry sharpening that works faster, cleaner, and easier.

Two Sides. Two Purposes. One Complete Edge.
Side Grit Best For
Coarse 400 # Repair large indentations, remove rough edges, consolidate the blade
Fine 1000 # Remove burrs, polish, smooth the edge to a razor finish
Why You’ll Love It
⚫No Oil or Water: Dry sharpening only. No mess, no prep, no cleanup. Sharpen anywhere — kitchen, garage, campsite.
⚫Diamond Surface: Super abrasive, reliable, and fast. Works on high-carbon steel, stainless steel.
⚫Effortless Sharpening: Light pressure only. Consistent results with less fatigue.
⚫Non-Slip Holder Included: Adds weight and grip — stone stays firmly in place during sharpening. Elevates the stone above the bench for easy handling.
⚫Clearance Channel Design: Debris and swarf fall away from the surface — prevents clogging, maintains cutting speed.
Multi-Use — Sharpen Almost Anything
⚫Kitchen knives
⚫Outdoor & hunting knives
⚫Plane blades and chisels
⚫Scissors
Quick Tips
1.Place knife at 15–20° angle to the stone
2.Apply light, even pressure
3.Push back and forth 10–15 times
4.Start with 400 grit, finish with 1000 grit
5.No oil, no water — just sharpen

Visit our website for full specs & free sample request:
https://www.satcabrasives.com/Sharpening-stone/8in-double-sided-diamond-sharpening-bench-stone-4001000-grit-w-non-slip-holder

03/05/2026

Stop Scratching. Stop Chemicals. SATC Rubber Eraser Wheel – Safe for Remove Decals

Removing decals, pinstripes, and stickers from cars used to mean plastic scrapers or harsh chemicals .
Not anymore.

Meet the SATC 4″ Rubber Eraser Wheel — the clean, safe, and fast way to strip decals and adhesives.
How It Works

Attach it to any standard drill. Apply the side of the wheel to the decal. Watch it disappear — the rubber friction “eats” the vinyl/adhesive without damaging the paint underneath.

Why You’ll Love It
⚫Paint-Safe — Soft rubber won’t scratch acrylic enamel or urethane paint. No more gouges from scraper blades.
⚫Chemical-Free — No toxic solvents, no skin irritation, no fumes. Better for you and the environment.
⚫Fast & Efficient — Removes vinyl, decals, pinstripes, double-sided tape, foam tape, and adhesive residue in minutes.
⚫Money Saver — Avoid the cost of respraying a damaged panel. Removes the decal, not the paint.
⚫Built to Last — Alternating slotted tooth design dissipates heat, prevents gumming, and extends wheel life.
Important Notes
⚫Works on: Acrylic enamel, urethane paint
⚫Do not use on: Lacquer coatings or plastic surfaces
Perfect For
⚫Auto body shops & detailers
⚫Race teams changing vinyl graphics
⚫DIYers removing old stickers or pinstripes

Visit our website for full specs & free sample request:
https://www.satcabrasives.com/Ruber-earser-wheel/eraser-wheel-4-inch-decal-remover-eraser-wheel-1-pack-with-adapter-rubber-eraser-wheel-for-drill-removing-decals-adhesives-pinstriping-stickers

26/04/2026

SATC 8” Steel Wire Trimmer Brush——From Overgrown Garden to Clean Metal

Meet the SATC 8″ Steel Wire Trimmer Brush — a rugged accessory that pulls double duty.
In the Garden
Mounted on your brush cutter, it powers through thick weeds, dense grass, and stubborn shrubs. 36-tooth steel wire construction bites into vegetation while the positioning hole design keeps wires from shifting — no constant readjustments.
In the Workshop
Swap it onto your angle grinder, and it becomes a heavy-duty surface prep tool:
⚫Remove rust and scale
⚫Clean welds and slag
⚫Deburr metal edges
⚫Strip old coatings
Features
⚫Stainless Steel Wire — corrosion-resistant, durable, and robust
⚫36-Tooth Design — efficient cutting and cleaning
⚫200mm Diameter, 25.4mm Bore — universal fit
⚫Compatible with most brush cutters
⚫Also fits standard angle grinders for metalworking
Precautions
When using on angle grinders, always wear:
⚫Safety goggles
⚫Heavy-duty gloves
⚫Hearing protection

Visit our website for details & free sample request:
www.satcabrasives.com/Wire-brush/8quot-200mm-grass-strimmer-head-trimmer-brush-steel-wire-wheel-garden-weed-trimmer

19/04/2026

SATC Red Scuff Pads – Smooth, Consistent Results for Auto & Metal

Before paint, before polish, before finish — there’s surface preparation. And the SATC 6″ x 9″ Red Scuff Pad makes that step faster, easier, and more consistent.
Why It Works
⚫320 Grit — The Sweet Spot
Aggressive enough to remove oxidation, dirt, and old coatings — fine enough to leave a smooth, uniform surface ready for paint or adhesive.
⚫Non-Woven Nylon Construction
Open web structure resists clogging. Abrasive particles stay sharp, even on messy jobs.
⚫Ultra-Flexible
Bends, twists, and conforms to curves, contours, and tight corners. No more struggling to reach awkward spots.
⚫Tear-Resistant
High-strength fiber base withstands repeated use, pulling, and twisting. Outlasts ordinary pads.
⚫Washable & Reusable
Rinse clean and reuse — extends service life and reduces waste.
Where to Use It
⚫Automotive: Scuff old clear coat, prep for repaint, blend repairs — essential for body shops and detailers.
⚫Metalworking: Remove oxidation from stainless steel and aluminum, deburr edges, create satin finishes.
⚫Woodworking: Smooth surfaces, remove splinters, prep for stain or varnish.
⚫General Maintenance: Clean tools, prep surfaces for adhesive, remove light rust and scale.
Specifications
⚫Size: 6″ x 9″ (150mm x 230mm)
⚫Grit: 320 #
⚫Color: Red
⚫Thickness: 0.39″

Visit our website for full specs & free sample request:
www.satcabrasives.com/Non-woven-hand-pad/red-320-6quot-x-9quot-scuff-pads-polishing-pad-stainless-steel-aluminum-automotive-surface-prep

12/04/2026

Say Goodbye to Clogged Sandpaper. Say Hello to Mesh

Introducing the SATC Aluminum Oxide Mesh Sanding Roll — a smarter way to sand, without the dust buildup.
⚫No Clogging
The open mesh structure allows dust to fall through, not get trapped. No more tapping or brushing your sandpaper every few seconds.
⚫Dust-Free Sanding
Less dust in the air, cleaner work surface, and better visibility of your progress — especially critical for automotive paint prep and fine finishing.
⚫Ultra-Flexible
The tear-resistant composite backing bends and wraps around curves, contours, and irregular shapes. Sand pipes, moldings, and panels with ease.
⚫Quick-Change Ready
Hook & loop backing fits orbital sanders and hand blocks. Swap grits in seconds — from aggressive 80 # to fine 800 # on the same roll.
Where to Use:
⚫Auto body filler & primer sanding
⚫Wood — edges, splinters, and smoothing
⚫Metal — deburring, rust removal, scratch repair
⚫Wall — drywall and patching compound
Available in: 70mm x 12m rolls | 60–800 grit

Visit our website for details & free sample request: www.satcabrasives.com/Sandpapersanding-cloth-roll

09/04/2026

SATC Nylon Quick Change Discs – From Aggressive Stock Removal to Mirror Finish Polishing

From aggressive rust removal to a polished finish — SATC Quick-Change Roloc Discs give you a seamless workflow in one system.
Each disc features a flexible non-woven nylon construction with premium aluminum oxide abrasive, conforming perfectly to flat, curved, and contoured surfaces.
⚫Coarse (Brown) — Heavy Stock Removal
Strip thick rust, heavy paint, weld slag, and rough burrs. Aggressive cutting for initial shaping and heavy-duty prep.
⚫Medium (Red) — General-Purpose Conditioning
Blend surface scratches, remove thin coatings, deburr edges, and prep substrates for paint or final finish. The go-to for automotive bodywork and metal detailing.
⚫Fine (Blue) — Precision Surface Refinement
Final buffing, polishing, and smoothing imperfections. Achieve a uniform, clean finish on metal, wood, and plastic.
Quick-Change Advantage
Tool-free attachment with safety torque spiral design — discs screw onto the mandrel securely and swap in seconds. No downtime, no tools needed.
⚫Available in 2″ and 3″ sizes
⚫Max RPM: 25,000 (2″) / 20,000 (3″)
⚫Type R / Type S
⚫Free samples available for qualified B2B customers

Visit our website for full specs: www.satcabrasives.com/Roloc-disc

SATC abrasives

15/06/2026

09/06/2026

24/05/2026

17/05/2026

10/05/2026

03/05/2026

26/04/2026

19/04/2026

12/04/2026

09/04/2026

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category