https://www.facebook.com/104247002523288/

Steel Supplier

Name: Steel Supplier
Address: SIIC Center, No. 195, Hong Kong East Road, Laoshan District, Qingdao City, Qingdao, CN
Telephone: +8615610056852

Home
China
Qingdao
Steel Supplier

We are a professional manufacturer with a wealth of experience in manufacturing Alloy Steel, Stainless Steel, Carbon Steel, Galvanised Steel, etc

28/01/2026

【Carbon Steel Pipe Tube】
Features:
We can provide following three categories carbon steel:

✅Low-carbon steel with a carbon content of between 0.04% and 0.30% is the largest category of carbon steel.
Properties: High toughness; Low tensile strength; High weldability; Low cost; High ductility; Low hardness; High machinability.

✅Medium carbon steel with typical carbon values between 0.31% and 0.60% and manganese content between 0.31% and 0.60%
Properties: Medium strength; Moderate toughness; Medium weldability; Medium ductility; Moderate machinability.

✅High-carbon steels are often referred to as “carbon tool steels” and typically contain between 0.61% and 1.50% carbon.
Properties: High toughness; Low machinability; High strength; Moderate weldability; Low ductility.

13/11/2025

【PPGI PPGL Coil】
Features:

✅PPGI and PPGL are pre-painted steel/aluminium coil products
✅Corrosion resistant plating
✅Good decorative properties
✅Good processability
✅Durability
✅High plasticity
✅Environmentally friendly

08/09/2025

【Galvanized Steel Pipe】

Features:
✅Corrosion resistance: The zinc coating on galvanized steel provides a barrier against moisture and other corrosive substances, helping to protect the underlying steel from rust and other forms of corrosion.
✅Durability: Galvanized steel is known for its strength and durability, making it a popular choice for a wide range of applications, including construction, automotive, and industrial settings.
✅Low maintenance: Because of its resistance to corrosion and durability, galvanized steel requires minimal maintenance over its lifetime, making it a cost-effective choice for many applications.

04/07/2025

【Galvanized Steel Plate and Sheet】
Galvanized steel sheets and plates are intended for use where greater corrosion protection is required without painting.Qinghe Steel stocks many sizes in precut sizes, full mill sizes or we can hot dip virtually any size and quantity required for your welding or construction project. Galvanized sheet / plate can be cut, machined or welded by common methods used for regular steel, but adequate ventilation should be used to avoid inhalation of fumes when heated.

Terms of price: EXW, FOB, CFR, CIF

Product customization available

26/05/2025

【Galvanized Coated Steel Hot Sheet Coil Rolled】

MOQ: 10Ton
Different MOQ, different prices

【Our Advantage】

1.5000㎡super large warehouse
2.5000 ton inventory
3.Eliminate middleman price difference
4.Service attentively and solve problems quickly

26/03/2025

【Galvanized Steel Sheet】
Galvanized steel sheet is a welded steel sheet with a hot-dip galvanized or electro-galvanized layer on the surface.
Main features:
Corrosion resistance: its ability is much higher than SGCC; heat resistance; heat conduction and heat reflection;
formability;
Weldability: Use: used in some places that require good reflectivity, such as the reflector inside the oven, and the reflector of the electric cooker.

18/02/2025

【Galvanized Steel Bar】
Galvanized steel bar refers to the galvanizing process of ordinary carbon construction steel, which can effectively prevent the steel from corroding and rusting, thereby prolonging the service life of the steel.

It is generally used for building exterior walls, such as glass curtain walls, marble curtain walls, aluminum sheet curtain walls as columns and bearing materials, or for outdoor telecommunication towers, highways and other open-air buildings. Steel is called galvanized steel. Dip galvanized.

25/12/2024

【Carbon Steel Wire】
Features:
We can provide following three categories carbon steel:

-Low-carbon steel with a carbon content of between 0.04% and 0.30% is the largest category of carbon steel.
Properties: High toughness; Low tensile strength; High weldability; Low cost; High ductility; Low hardness; High machinability.

-Medium carbon steel with typical carbon values between 0.31% and 0.60% and manganese content between 0.31% and 0.60%
Properties: Medium strength; Moderate toughness; Medium weldability; Medium ductility; Moderate machinability.

-High-carbon steels are often referred to as “carbon tool steels” and typically contain between 0.61% and 1.50% carbon.
Properties: High toughness; Low machinability; High strength; Moderate weldability; Low ductility.

12/12/2024

【Carbon Steel Bar】
Features:
We can provide following three categories carbon steel:
-Low-carbon steel with a carbon content of between 0.04% and 0.30% is the largest category of carbon steel.
Properties: High toughness; Low tensile strength; High weldability; Low cost; High ductility; Low hardness; High machinability.
-Medium carbon steel with typical carbon values between 0.31% and 0.60% and manganese content between 0.31% and 0.60%
Properties: Medium strength; Moderate toughness; Medium weldability; Medium ductility; Moderate machinability.
-High-carbon steels are often referred to as “carbon tool steels” and typically contain between 0.61% and 1.50% carbon.
Properties: High toughness; Low machinability; High strength; Moderate weldability; Low ductility.

28/11/2024

【Carbon Steel Pipe Tube】
Features:
We can provide following three categories carbon steel:

-Low-carbon steel with a carbon content of between 0.04% and 0.30% is the largest category of carbon steel.
Properties: High toughness; Low tensile strength; High weldability; Low cost; High ductility; Low hardness; High machinability.

-Medium carbon steel with typical carbon values between 0.31% and 0.60% and manganese content between 0.31% and 0.60%
Properties: Medium strength; Moderate toughness; Medium weldability; Medium ductility; Moderate machinability.

-High-carbon steels are often referred to as “carbon tool steels” and typically contain between 0.61% and 1.50% carbon.
Properties: High toughness; Low machinability; High strength; Moderate weldability; Low ductility.

25/09/2024

【Carbon Steel Coil】

Formed coils are mainly hot-rolled coils and cold-rolled coils. Hot rolled coils are processed products prior to recrystallization of steel billets. Cold rolled coil is the subsequent processing of hot rolled coil. The general weight of the steel coil is about 15-30T. my country’s hot rolling production capacity has been continuously expanded. There are already dozens of hot rolling production lines, and some projects are about to start construction or put into production.

The sale of steel coils in coils is mainly aimed at large customers. Generally, users do not have uncoiler equipment or have limited consumption. Therefore, the subsequent processing of steel coils will be a promising industry. Of course, the larger steel mills currently have their own decoiling and leveling projects.

14/09/2024

We met many customers at the Türkiye exhibition. We exchanged product information and the latest industry information and maintained friendly relationships.

Address

SIIC Center, No. 195, Hong Kong East Road, Laoshan District, Qingdao City
Qingdao

Telephone

+8615610056852

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Steel Supplier posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Steel Supplier:

Shortcuts

Want your business to be the top-listed Equipment Service in Qingdao?