COVO Bending Dies-Romee

Home
China
Nanjing
COVO Bending Dies-Romee

Website

Press Brake Tooling.We are bending tools manufacturer for 22 years.

05/11/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design

Long slot parts - step-by-step bending drifts and slows you down. One-shot
forming die locks the slot profile in a single pass. Stable dimensions, smooth batch runs.

🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

04/11/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design
Door frame dovetail slots with R-corners
- why do some assemble perfectly tight while others sit uneven with obvious gaps?
The issue is dovetail deformation and uncontrolled R-corner springback.
This dovetail R-corner door frame die forms it in one shot - precise dovetail lock, smooth R-corner, tight corner joint.
Bring your drawings - you set the specs, we build the dies.
🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

03/11/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design
Standard lower dies drag the material across the V-opening - leaving scratches and die marks.
Wing-type flip panel lower die - the wing plates flip with the material, converting sliding to rolling - surface fully preserved.
For surface-sensitive materials, the lower die is the key.
🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

02/11/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design

Large gooseneck bending small square box - gooseneck profile bypasses the box sidewalls for internal bending. No collision, no damage.
Precise angles, clean surfaces. Ideal for deep channels, tall flanges, internal box bends - any interference scenario.

🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

01/11/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design

This sharp punch has massive versatility on the shop floor. Bending narrow edges? It cuts right alongside. Bending box parts with flanges? It clears the interference.
Bending deep channels? It reaches right in.
One punch covers multiple challenging scenarios.

🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

31/10/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design

Bending interference? Switch to this single-V-point blade. Its 30° cutting edge easily reaches areas that conventional molds can't access.
Especially suitable for:
✅Secondary bending of pre-formed workpieces
✅Narrow-edge bending with flanges
✅Small U-shaped and Z-shaped parts with closed dimensions

🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

31/10/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design

Corrugated sheet formed in one stroke - smooth waves, consistent depth.
One sheet, multiple corrugations - neat and uniform.
Flat panel, accurate curvature - a pleasure to look at.

🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

29/10/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design

Different angles, different clearances, different thicknesses-there's always a sharp punch that fits your job.

🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

28/10/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design

Customer needed V-shaped stiffening ribs with specific depth and positioning.
We built this die. Passed the trial run first time - full ribs, flat panel. Customer approved and went straight to batch production.

🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

27/10/2026

Covo Press Brake Tools Manufacture🔥|Factory Production|Free Custom Design

A customer ordered a custom wave pattern - why do some come out with uneven depth while others warp like a pretzel? The issue isn't the material; it's die cavity precision and springback compensation. This custom wave pattern forming die is precision-machined to the drawing. Press down for a uniform pattern and a flat panel.
Bring your drawings - you set the specs, we build the dies.

🌐Website:www.chinacovo.com
💬What's app:+86 18355580428
📬Email:[email protected]

Address

江苏省南京市
Nanjing

Website

http://www.chinacovo.com/

Alerts

Be the first to know and let us send you an email when COVO Bending Dies-Romee posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.