Zhejiang CHBL Transmission Co.,Ltd.

27/08/2018

Weekly News of Ball Bearings & Motor Industry

NTN
NTN germany manufacturing starts mass production of precision bearings from the end of August 2018.

Timken
Timken announced that it will participate in the Vertical Research Partners 2018 Industries Conference on Sep 5th, 2018 in Westbrook, Conn.

Bosch
Bosch said it would take a 4 percent stake in Britain's Ceres Power Holdings, to jointly develop the next generation of solid oxide fuel cells.Bosch believes that the highly efficient fuel cell, with its very low emissions, has an important role to play in energy systems' security of supply and flexibility.

18/08/2018

Weekly Industry News of Ball Bearings & Motors & Wind Turbines

To reduce the levelized cost of electricity remains a major challenge facing the wind power industry, Schaeffler will display innovative products with an extended operating life and integrated sensor technology as well as digital services for optimized wind turbine operation. Wind turbines’ functionality and performance capability are decisively influenced by their bearing supports(the gearbox and especially the main bearings), as these sup[port all of the loads that occur.
The asymmetric FAG spherical roller bearings are found in numerous wind turbines, allowing a larger contact angle to be used on the rolling element row subject to axial loads and a smaller contact angle on the row subject mainly to radial loads, wind turbine manufacturer can thus downsize the drive train or increase the turbines’ performance or rotor diameter comparing with typical rotor bearing.
Schaeffler and ZF use jointly developed expert models to analyze and predict the condition of wind turbine gearboxes based on the actual loads that occur during operation, and the data offers immense potential for improving the drive train’s rolling bearing supports and the system as a whole, as well as optimizing the wind turbine’s operation.

11/08/2018

Industry News from 6th Aug to 11th Aug

Schaeffler:
1.Schaeffler Group and Paravan establish Schaeffler Paravan Technologie GmbH & Co. KG, Joint Venture to acquire SPACE DRIVE drive-by-wire technology from Paravan and Mover activities from Schaeffler.
Drive-by-wire is key-enabling technology for the fast-growing market segment autonomous driving, for which safe and highly reliable steering is a fundamental requirement.

2.Revenue grows 5.8 percent at constant currency in the first six months, significantly higher order intake for Automotive OEM division, book-to-bill ratio 1.8x.Revenue and earnings driven by encouraging performance of Automotive aftermarket and industrial divisions.

Mitsubishi Motors:
Mitsubishi Motors has announced it is to increase production of its XPANDER small MPV following strong demand from customers across the ASEAN region.

Toshiba Motors:
Toshiba International Coeporation today announced the cutting edge Efficiency, Quality & Performance(EQP) Global low voltage motor series now includes IEC motors compliant with the requirements of IEC 60034. The EQP Global IEC motor series is designed for severe duty applications,
featuring IP55 ingress protection and a totally enclosed fan cooled(TEFC) enclosure

04/08/2018

Industry News of Ball Bearings, Pumps & Motors Weekly Updates

NTN: NTN celebrated its 100th anniversary in March 2018.

SKF:

On 31st July 2018, SKF has signed an agreement to divest its linear and actuation technology business to Triton.The divestment announced today is part of the Group’s efforts to focus on its core business and value propositions around the rotating shaft. In total, these divestments have now raised approximately SEK 6.7 billion.

On July 23rd, SKF announced the introduction of SKF Ultrasonic Leak Detector TKSU 10, designed for using in noisy industrial environments, simple to operate, this device utilizes ultrasonic technology to locate leaks in compressed air or vacuum systems, features a convinient LED display, helping the user to optimise leak detection and supporting quantification of leakage.

Calpeda:

Bearing life is a key aspect on the reliablity of the pump, the purpose of ball bearings is mainly to support the whole load of the shaft line and also withstand the axial thrust for the rotor. Pump manufacturers usually guarantee that their bearings will last for 15,000 hours of pump operation, Calpeda, however , equip its pumps with bearings that are sized to reach 20,000 hours. Pumps with oversized bearings operate better, especially in hot environments, because the risk of ball bearing overheating is much lower. Attention to sustainbability led Calpeda to consider the question of energy consumption also in this case. Calpeda has been working together with SKF, the ball bearing company , on energy efficiency tied to reduced pressure drops, transforming it into a production standard. In this manner, even though bearings are bigger, consumption does not increase and the optimal result of blending a longer-lasting product with energy efficiency can be obtainer.

Leroy Somer:

New Commander ID300 motor drive: regulation is controlled by means of an external sensor (0-10V or 4-20mA) independently powered by the Commander ID300 and an integrated PID controller, Commander ID300 automatically adjusts the pump flow rate according to actual need and manages pump shutdown when required. It can be configured to detect loss of prime and can provide notification of the operation statuses (auto-start, maximum flow, loss of prime, sensor fault,etc.). This function is ready-to-use. Commander ID300 is equipped with a display that can be personalised and provide views of application data in real-time(temperature, volume, flow rate, pressure, tec.). And for low-speed pump technologies, Commander ID300 can be associated with Leroy-Somer geared motors for adjusting the application torque. The robust drive system is insensitive to liquid splashes(IP55 rating) and vibrations (electronics moulded in resin), and supports an ambient temperature of up to 50°C. It is designed to operate in all domains of industry, irrigation, building and the environment.

28/07/2018

Ball Bearings
Schaeffler Group
Automotive Aftermarket of Schaeffler gives product packaging new optics.

Schaeffler is now delivering spare parts and repair solutions in newly-designed packaging worldwide, choose the materials and manufacturing of the new packaging with a focus on high environmental standards, all packages are easy to dispose of and recycle.

Each package has a band printed on it that ensure distribution partners and garages can continue to identify each product brand quickly.

Motors
Mitsubishi: Publish First Quarter Financial Result for FY2018 on July 24th, 2018

Mitsubishi reports net sales for 1Q/FY2018, up27.0% year-on-year, and operating profit rose up 36.4% year-on-year, representing an operating margin of 5.0%.

ASEAN sales increased by 28% to 69,000 units, driven by orders for pick-up trucks in Thailand and the strong performance of the new XPANDER MPV launched in Indonesia last fall.

14/07/2018

Business News of Bearing Industry from 1st July to 14th July

NTN Group

1. 100 years anniversary
2. A new thin, lightweight and detechs angle of robot joint part , "double row magnetic ringd", will start mass production in July 2018.

C&U Group

1.In the research of China's excellent auto parts enterprise, C&U group is award of "Precise Quality Breakthrough Award".

Schaeffler Group

1. Set new standard of E-bikes in intelligent bootom bracket units, powerful roller cluthes and automatic Velomatic gearshift system.
2. Schaeffler's communication department is pleased to have received several prestigious accolades this summer: two videos, "Why we race" & "Thailblazers", have won awards.
3. Schaeffler will put more attention on fast growing LCV(Light Commercial Vehicle), increasing 8% rate per year.

Web:www.CHBL.com.cn

14/06/2018

https://youtu.be/anDcN4uX5UU

Share a video of our automatic work of ball bearings.

Steps before assembling of ball bearings, automatic washing, stamping the seal cover, dB full inspection. Amazing! Zhejiang CHBL Transmission Co.,Ltd.