Huage engines

Call Contact the business

Huage engines EV charger factory｜7kW‑720kW
Produce home wall‑box, commercial DC chargers, charging guns & modules. Direct factory supply.

Message us for project cooperation & quotations.

29/08/2026

Our factory is testing 360kW to 720kW EV chargers.
Repost to get more reach.

28/08/2026

Our 720kW liquid‑cooled DC charger internal look.
Multiple cooling fans work with liquid‑cooling system for effective heat control.
For 100kWh EV, 0‑80% takes around 8‑12 minutes, adding 300‑400 km range.
Intelligent power adjustment protects vehicle battery against over‑heating.
Ideal for highway stations & large charging hubs.
DM us for full datasheet.

28/08/2026

30kW DC EV Charger Full Detailed Introduction (English Version)

28/08/2026

This is our 7kW stand‑alone home AC charger. No wall drilling, floor standing, easy installation. Just like slow charging your phone, gentle AC charging protects your EV battery for the long run. Plug in at night, wake up fully charged. Send us a DM for datasheet and factory quotation.

7kW VS 22kW stand‑alone home AC EV charger, which one fits your garage?Think about your smartphone: gentle slow‑charging...
28/08/2026

7kW VS 22kW stand‑alone home AC EV charger, which one fits your garage?

Think about your smartphone: gentle slow‑charging helps extend battery life, while frequent high‑speed charging creates more heat and accelerates battery wear.
The same logic applies to your electric‑car battery. Both 7kW and 22kW are AC charging, much gentler than public DC rapid chargers, good for long‑term battery health.

🔋7kW home AC charger
Perfect for regular family overnight charging.
For a common 60kWh EV battery, full charge takes around 8‑10 hours. Plug it in at night, get fully‑charged car next morning.
Stable low‑heat output, minimizes battery degradation, ideal for daily commuter EV owners. Simple installation for most single‑phase household power supply.

⚡22kW home AC charger
It is still alternating‑current charging, friendly to EV battery as well, but delivers much higher power for faster charging speed.
For the same 60kWh battery, full‑charge time reduces to roughly 3‑4 hours.
Great if you often drive long distances and need quicker top‑up at home.
Note: your vehicle has to support 22kW AC input, and three‑phase power supply is required for installation.

Public DC fast chargers are convenient for road trips, yet daily home AC charging protects your traction battery over years of usage.

We are professional manufacturer for stand‑alone & wall‑mount 7kW‑22kW AC chargers, complete certifications for overseas market.
If you are installer, distributor or project partner, send DM for datasheet and factory‑direct quotation.

Our product portfolio tailored for the European EV‑charging market.✅ 360kW / 480kW / 600kW / 720kW liquid‑cooled DC char...
28/08/2026

Our product portfolio tailored for the European EV‑charging market.

✅ 360kW / 480kW / 600kW / 720kW liquid‑cooled DC charging stacks
Dynamic power allocation function supports flexible power distribution among multiple connectors.
Fully compliant with CCS2 standard, CE‑TUV certified, ready for OCPP2.0.1 protocol, easy to integrate with most local charging‑management platforms.
Liquid‑cooled design greatly reduces cable heating, lowers operation loss and extends service life, perfectly suited for high‑traffic highway service stations, large public charging hubs and commercial parking‑lot projects.

✅ 22kW*2 dual‑gun AC charger for parking lots
Dual‑gun simultaneous charging design, ideal for shopping‑mall parking, office buildings, residential community shared‑charging scenarios. Stable outdoor performance, IP65 protection grade, adapts to Europe’s diverse climate conditions.

✅ 30kW compact DC fast charger for small‑scale sites
Compact footprint, simple installation, low‑maintenance. A cost‑effective choice for convenience stores, hotel parking, fleet depots and small‑business premises where space is limited.

As a direct Chinese manufacturer, we complete core‑module R&D, production and testing in‑house.
All key certificates are available for EU market access.
We work closely with distributors, charging‑network operators, system integrators and EPC contractors across Europe.
Whether you are looking for bulk standard‑unit procurement or project‑oriented customized modification, our technical team can offer professional support.

If you are interested in our charging‑station solutions, feel free to send us DM or WhatsApp.
We will share detailed datasheets, specification documents and competitive factory‑direct quotation for your project evaluation.

Our product portfolio tailored for the European EV‑charging market.✅ 360kW / 480kW / 600kW / 720kW liquid‑cooled DC char...
28/08/2026

Our product portfolio tailored for the European EV‑charging market.

✅ 360kW / 480kW / 600kW / 720kW liquid‑cooled DC charging stacks
Dynamic power allocation function supports flexible power distribution among multiple connectors.
Fully compliant with CCS2 standard, CE‑TUV certified, ready for OCPP2.0.1 protocol, easy to integrate with most local charging‑management platforms.
Liquid‑cooled design greatly reduces cable heating, lowers operation loss and extends service life, perfectly suited for high‑traffic highway service stations, large public charging hubs and commercial parking‑lot projects.

✅ 22kW*2 dual‑gun AC charger for parking lots
Dual‑gun simultaneous charging design, ideal for shopping‑mall parking, office buildings, residential community shared‑charging scenarios. Stable outdoor performance, IP65 protection grade, adapts to Europe’s diverse climate conditions.

✅ 30kW compact DC fast charger for small‑scale sites
Compact footprint, simple installation, low‑maintenance. A cost‑effective choice for convenience stores, hotel parking, fleet depots and small‑business premises where space is limited.

As a direct Chinese manufacturer, we complete core‑module R&D, production and testing in‑house.
All key certificates are available for EU market access.
We work closely with distributors, charging‑network operators, system integrators and EPC contractors across Europe.
Whether you are looking for bulk standard‑unit procurement or project‑oriented customized modification, our technical team can offer professional support.

If you are interested in our charging‑station solutions, feel free to send us DM or WhatsApp.
We will share detailed datasheets, specification documents and competitive factory‑direct quotation for your project evaluation.

High‑quality energy storage & EV charging equipment direct from factory.We supply complete home & commercial energy‑stor...
28/08/2026

High‑quality energy storage & EV charging equipment direct from factory.
We supply complete home & commercial energy‑storage battery systems, alongside full‑range EV charging solutions from 7kW residential wall‑box to 720kW high‑power DC fast‑charging stations.
Our energy‑storage systems adopt reliable grade‑A cell modules, supporting large‑capacity energy storage and high‑current discharge. Built‑in advanced BMS protection safeguards every single cell, providing long service cycle life and extended‑term warranty support.
Compared with many assembled battery packs on the market, our integrated all‑in‑one cabinet‑type energy‑storage units feature better consistency, complete protection functions, simpler installation and lower long‑term failure rate. It brings more stable operation for residential self‑consumption solar projects, commercial photovoltaic energy‑storage projects and off‑grid power‑supply scenarios.
For EV‑charging portfolio: our product line covers home AC wall‑box chargers, commercial DC fast chargers, charging guns and core charging modules. The equipment is designed for all‑weather operation, with excellent wide‑temperature resistance and IP65 outdoor‑proof performance, adapting to complex working conditions in tropical, high‑temperature, rainy and cold‑snow regions.
We serve system integrators, solar installers, electrical contractors and project developers across global markets. Whether you need standard‑model bulk procurement or customized‑solution cooperation for special‑project requirements, our R&D and production team can support your demands.
If you are sourcing energy‑storage batteries or EV‑charging hardware for your local market projects, feel free to send me a private message. We can share full datasheets, technical parameters, reference project cases and favorable factory‑direct quotation for your evaluation.
Looking forward to establishing long‑term win‑win business partnerships.
WhatsApp:+86 193 3090 1639

Address

Guangzhou
510630

Opening Hours

Monday 09:00 - 21:00
Tuesday 09:00 - 21:00
Wednesday 09:00 - 21:00
Thursday 09:00 - 21:00
Friday 09:00 - 21:00
Saturday 10:00 - 22:30
Sunday 10:45 - 22:30

Telephone

+8615013126806

Website

Alerts

Be the first to know and let us send you an email when Huage engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Huage engines:

Shortcuts

Share