Cylon Cutting Tools

Cylon Cutting Tools Professional CNC Tool Manufacturer | 20+Y Experience | Factory-Direct Anti-Vibration Systems & Tooling.

31/08/2026

45° Compound Boring Cutter with 7‑edge composite layout✨
One‑pass machining for boring, step‑face processing, 45° hole chamfering and outer‑diameter chamfering.
Heat‑treated cutter body delivers high hardness and stable rigidity.
Designed for mass production of multi‑step holes, it eliminates frequent tool changes and doubles processing efficiency.

27/08/2026

Cutting‑tool black‑oxide treatment finished.
Range includes T‑slot cutters, face milling cutters, Capto modular heads, anti‑vibration thread‑milling heads and grooving tools.
Uniform black‑oxide layer enhances rust‑proof & wear‑resistant performance with improved surface texture.

Replacing cutting tools every 2 shifts? That's not a machining problem — it's a tooling problem.Short tool life is one o...
25/08/2026

Replacing cutting tools every 2 shifts? That's not a machining problem — it's a tooling problem.

Short tool life is one of the most expensive hidden costs in CNC machining. Most shops accept it as normal. It isn't.

The real causes are almost always the same:

⚠️ Wrong substrate for the material — not all carbide grades handle heat and interrupted cuts the same way ⚠️ Coating mismatch — TiAlN works for steel, but destroys itself fast on aluminium and non-ferrous materials ⚠️ Geometry not matched to your feed/speed — even a premium insert fails early with the wrong rake angle

At CYLON Tools, we help machinists select the right insert grade, coating, and geometry combination for their specific application — backed by 26 years of manufacturing knowledge and 160+ ANCA & Walter grinding machines.

Проблема с коротким сроком службы инструмента? Давайте подберём правильное решение вместе.

Tell us your material and application — we'll tell you exactly what works. 📩 WhatsApp: +86 158 2133 3570 🌐 cylontools.com

24/08/2026

Tired of frequent tool changes & long cycle‑time for mass threaded‑hole machining?
Our custom boring‑thread‑milling combined tool holder performs boring, hole chamfering and internal thread milling in one setup. Less tool changes, shorter cycle time, higher mass‑production efficiency.

20/08/2026

Workshop stock snapshot📸
Large batch of face milling cutter heads ready for delivery.
High rigidity & good shock resistance, ideal for heavy stock removal.
We support non‑standard customization, alternative to imported tools. Welcome for trial order test.

19/08/2026

Custom Double‑Head Turning Tool
Single shank with two independent cutting tips: OD/facing on one end, boring on the other.
Replaces two standard tools within one turret station, cutting tool‑change time and speeding‑up cycle time.
Ideal for CNC lathes with hydraulic chucks & limited turret stations.

15/08/2026

Ever struggled with standard cutting tools?
Long tool overhang causes vibration; hard materials chip inserts right away.
Multi‑step special grooves force multiple tool changes, costing precious machine‑down time.
Stop making do with standard tools.
We deliver custom non‑standard cutting tools:
• Composite drills for one‑shot formed special‑shaped holes
• Corn‑cob milling cutters for aggressive, stable high‑feed roughing
• Custom side‑and‑face cutters for complex stepped grooves — one tool replaces three.
Custom‑built for tricky drawings, prototypes & mass production.
Fewer tool changes, lower tooling costs, higher efficiency.

14/08/2026

Custom Non-Standard 270mm Large Diameter 90° Face Milling Cutter
High strength and toughness, impact resistant & anti-deformation.
Suitable for surface milling, step machining and vertical side milling of large workpieces.
Performance comparable to imported face mills from Sandvik and Walter.

12/08/2026

Eccentric back countersink cutter works in confined areas inaccessible for forward cutting, performing reverse countersinking, chamfering, back deburring and facing for internal housing parts. The tempered 42CrMo shank features an anti-rotation flat to avoid slipping during machining.

10/08/2026

Two heavy‑duty turning tool holders:
The 40×50 square‑shank OD holder fits standard CNC square turrets and delivers strong anti‑vibration performance for long‑overhang deep‑cavity rough and semi‑finishing.
The D80 round‑shank ID holder features a 320 mm extended body and R40 offset tip for machining large‑size workpieces.

Address

中国江苏省常州市
Changzhou
213100

Website

Alerts

Be the first to know and let us send you an email when Cylon Cutting Tools posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category