Connect Custom Fabrication

Connect Custom Fabrication Couple of Aussie blokes, Jayden & Brendon, pioneering the field of fabrication and design for caravans and 4WDs.

Join us as we revolutionize the way you explore the great outdoors ⚑

08/04/2025

🚘 NP300 Navara Snorkel and Airbox

- Stainless short entry snorkel
- Aluminium custom airbox with ecu relocation and washer bottle
- Powder coated
- Laser cut snorkel and airbox logo

Supply and install πŸ’ͺ🏻

Little custom fab job πŸ”§ Before, during, after ⏰ Cut and modify the front of this Bar Crusher, then fabricate and weld in...
09/03/2025

Little custom fab job πŸ”§
Before, during, after ⏰

Cut and modify the front of this Bar Crusher, then fabricate and weld in a trawling motor plate and mount! Finished in satin black to match!

Functional with a neat factory look πŸ‘€

A small custom carvan box for some under storage. We don’t just do solar and 4wd’s we can cater to all your custom needs...
19/02/2025

A small custom carvan box for some under storage.

We don’t just do solar and 4wd’s we can cater to all your custom needs.

Dm us for any enquires or for a Chat about any crazy ideas you may have.

Another one out the door πŸ’ͺ🏻 Full aluminium traySequential tail lightsStedi reverse lightsLaser cut with flush tie downsF...
10/02/2025

Another one out the door πŸ’ͺ🏻
Full aluminium tray
Sequential tail lights
Stedi reverse lights
Laser cut with flush tie downs
Finished in satin textured black 2Pac paint
Approx 52L water tank in headboard

Make your ute look different from the rest πŸ’―

Interested? Flick us a message to discuss ☎️

Ford Ranger PX series airbox.Fully tig welded aluminium construction, utilising factory mounting holes. πŸ’―This airbox use...
04/11/2024

Ford Ranger PX series airbox.
Fully tig welded aluminium construction, utilising factory mounting holes. πŸ’―
This airbox use a billet MAF plate and fits exisiting piping to engine and snorkel to retain all factory features.
Included is a Uni filter foam air filter. This combo gives the best filtration possible to prevent dusting and also gives good induction noise πŸ’ͺ🏻

Just another Connect Custom Fabrication product πŸ‘ŒπŸ»

UPDATE πŸŽ‰In between developing and manufacturing our solar panel kits (as well as new products coming soon 🀫). We also do...
13/10/2024

UPDATE πŸŽ‰
In between developing and manufacturing our solar panel kits (as well as new products coming soon 🀫). We also do custom products!
This Navara received a custom designed and manufactured tray. As well as an air box with inbuilt washer bottle, alongside a stainless snorkel!
Installed by CCF of course πŸ’ͺ🏻

No better proof of concept than being used in the real world 🌏Our tilting solar panels just keep proving themselves πŸ’ͺ🏻 O...
25/08/2024

No better proof of concept than being used in the real world 🌏

Our tilting solar panels just keep proving themselves πŸ’ͺ🏻

One of our kits have just clicked over 5000km and 8 weeks of daily usage from Victoria to the Kimberley with no flat batteries πŸ”‹

πŸ’―% positive feedback to back it up!
https://www.ebay.com.au/usr/connect_custom_fabrication

27/07/2024

Great cause! Support local πŸ’ͺ🏻

REAL LIFE APPLICATION!You may think that the tilting panel needs to be pointed towards the sun to work efficiently. Thin...
12/06/2024

REAL LIFE APPLICATION!
You may think that the tilting panel needs to be pointed towards the sun to work efficiently. Think again!

As you can see from the example below the sun does not need to run over the top of the van. The sun, especially in winter, when we struggle for power, has a very low arc. Using you tilting panels to harness this can get you gains all day!

The below example has 2 retro fitted kits on the van. Running through a Projecta Intelli-RV, we can see with the panels flat there was a charge level of 8.66A. Once tilted towards to suns arc, the remaining charge time more than halved, the charge rate more than doubled! This went from charging at less than 50% of the panels capability, to getting maximum amount of charge that both panels can accept!

NEW PRODUCT ALERT!All the great features and benefits of our tilting solar panel kit. Except you can now use your own/ex...
29/05/2024

NEW PRODUCT ALERT!

All the great features and benefits of our tilting solar panel kit.
Except you can now use your own/existing panel!

Simply follow the instructions on the advert on how to order!
To break it down quickly for you, purchase the kit only. When checking out, in the notes, send us your panel model as well as dimensions. We will custom make the kit to suit your panel.

The in-depth instructions come with the kit so that fitting your own panel is as simple as 12 pop rivets!

Our tilting solar panels are either a retrofit solution to your existing van or can be installed to new vans. Max panel tilting angle: (differs between models). When checking out, in the notes at checkout, let us know what model panel you have, as well as length x width x thickness.

Wondering on the gains you could get from adding a tilting solar panel?Lets say you’re out of room on the roof of your v...
24/05/2024

Wondering on the gains you could get from adding a tilting solar panel?

Lets say you’re out of room on the roof of your van, but you need more power generation to keep you in the comfort your accustom to!

Our testing shows that you would need approx. 3.77 flat solar panels to equal the power generated from a tilting panel.

If you have 2 panels on the roof of your van currently, adding 1 tilting panel system will give you the equivalent power generation of 5.77 panels in total at approx. 4:30pm or 8:30am depending on which way you mount your system.

Facts don't lie!

Link to purchase on our page!

Address

Wodonga, VIC
3690

Alerts

Be the first to know and let us send you an email when Connect Custom Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share