https://www.facebook.com/534646759735079/

CCS Welding and Fabrication

Home
Australia
Smithton, TAS
CCS Welding and Fabrication

Specialise in mobile welding and maintenance. 4x4 truck 24/7 breakdown cover

20/09/2026

BOILERMAKER WANTED👨🏼‍🏭- position filled, thankyou to everyone that sent in your resume and got in touch.

We are after a boilermaker to service a client on a west coast mine doing a 7/7 day shift roster. Starting in October the role is a mixture of fixed plant maintenance,mobile equipment maintenance and projects.

⭐️What we can offer you:

• Competitive wages starting on casual with the opportunity to go full time down the track.

• Superannuation paid on all hours

• Work vehicle with fuel card

• Paid travel

• Potential for more training/tickets

⭐️What we ask from you:

• Cert 3 engineering metal fabrication

• Manual driver’s license

• Can do attitude & reliable

• Be able to work in a team or individually

• Willing to learn and do tasks that aren’t only boilermaker related.

**Advantages but not essential - MEM experience, MR licence, high risk tickets, W@H and confined space tickets**

⭐️ Please email resumes to [email protected] or ring Chris on 0437089257. If I don’t answer make sure to leave a voicemail or text.

01/02/2026

Today I got to work on one of the coolest and definitely oldest machines i have fixed. 😎

A 1930 steam engine. 🚂

I replaced the belly plate and a small section on the radius on the water tender, so the restoration on this machine can continue 👌🏼

21/12/2025

Managed to squeeze in this custom tray build to suit a canopy set up for touring🛻
This tray has more storage than most houses with 2 1100 long side toolboxes and a 1500 long trundle draw underneath🧰

If your 4x4 needs an upgrade to suit your dreams reach out and we will make it possible 👌🏼

14/12/2025

With the tractor 🚜 crews flat out at this time of year I received a breakdown call at 430pm ⏰ and this tractor was back working before the sun went down. 🌅

FYI - to let you all know I will be on call over the Christmas & New Year period, so reach out if you need a breakdown fixed ASAP! 🎅🏽🍺🎆

01/12/2025

It’s the first day of summer☀️🍻so I thought I’d show you some workshop improvements I have done recently🏚️ if access is an issue in your workplace reach out and I’ll have a solution for your problem👌🏼

First off a staircase with handrails fabricated and installed to Australian standards. 🎢

Secondly, a ladder modified and installed to access the roof for maintenance🪜

02/11/2025

G,day everyone! Hope you are all enjoying the long weekend 🏕️ apologies for the page being quiet, it has been an extremely busy 3 months especially with the arrival of the future apprentice 👶🏼
Keep an eye out over the next couple of weeks to see what I’ve been up too, but I’ll start with the machines.
All cracks gouged, cleaned, backing plate and welded with quality lincoln 71-EH wire👌🏼💪🏼

Photo 1-2: 2 of the most common crack points sorted on a Cat 20 tonne digger.

Photo 3-6: a couple of decent cracks on the track frame and slew ring on a Volvo 25 tonne digger which had previously been repaired but didn’t last.

Photo 7: hardfacing on the log grabs of a Cat 980 loader.

Photo 8-9: small crack repair on a set of excavator log grabs.

Photo 10-11: multiple cracks repaired on a 20 tonne tilt hitch.

Photo 12-15: a decent crack on a 20 tonne stick with a couple of smaller ones to sort out too.

Photo 16-21: removed old bent step, fabricated and installed new step. Belly plate had also been smashed in, so new mounts welded in and bolted back together.

Photo 22-23: crack repair on a forwarders log cradle, I plated this one after the repair to prevent further cracking.

Photo 24-25: Complimentary big rig photos 🛻 📸

03/08/2025

It was a nice morning in the bush and lucky most of the rain held off. 🌥️
4 cracks gouged, welded and peened👌🏼

Whether it’s raining or sunny, weekdays or weekends always happy to help out to get your gear up and running again!!

28/07/2025

Typical west coast weather 🌦️ but that didn’t stop me from getting 2 machines back up and running today👌🏼

1st job: A big crack in the track frame of a harvester gouged out, straightened, backing plates in, welded and peened.

2nd job: A smaller crack in the grab on a forwarder cut out, welded and peened.

Whether the sun is shining☀️or it’s bucketing down🌧️ give me a ring for any breakdown!

18/07/2025

This wood splitter is a beast! It would be good to know how many kilometres of wood it’s split!🪵💪🏼

It came in abit fatigued so I put a new splitting deck, knifes with a new configuration as requested and the bottom discharge plate on more of an angle.

All preheated and welded with 71-EH wire so this will last many more kilometres of splitting!

Address

Smithton, TAS
7330

Website

facebook.com

Alerts

Be the first to know and let us send you an email when CCS Welding and Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Want your business to be the top-listed equipment service in Smithton?