J Spec Designs

19/10/2026

Any N15 pulsar owners out there? We’ve replicated the out of production oem STILLEN badge which had been featured on a grill and the rear sedan boot of N15 pulsars. Now live on on our webstore

This is a replica STILLEN Resin replica decal as Nissan has discontinued. We suggest making some sort of plug to fill the gap in the grip so the resin decal sits nice and flush.  

02/10/2026

Something that has been on the cards for a while and finally ready for production to all N13 owners. Here’s our drivers side vent to suit 52mm gauge.

We have also designed a backing to make a clean design and way to feed wires and boost lines through by simply drilling out the required hole size.

This is a simple bolt in product uses the OEM screws and mounts in the original vent position so if needed can easily be swapped back to OEM with no modifications required.

We are also currently working on the left side vent of the cluster. If you’re interested you can check it out on our website via the provided link.

https://www.jspecdesigns.com/store/p/n13-pulsar-drivers-side-vent-52mm-gauge-pod-holder

26/03/2026

For those you have enquired about n14 and n15 resin gel SSS decals, stock has been updated on our site and AVAILABLE NOW!!

https://www.jspecdesigns.com/store

29/09/2025

Here’s a post just to say thank you to all our customers that have supported our small business and for purchasing our products that we slowly trickle out. Also a shout out to our international customers and seen few from the U.S and NZ. Glad to see our gtir/N14 vent gauge on the way to your part of the world.

Few more products coming out so stayed tuned,

We have our

- drivers side vent for the n13 about to release from our online store. (can hold 52mm gauge)

- and we have something in the works for the n14 pulsar SSS J*p spec model. (Replacing inside fog light to a grill)

05/08/2025

https://www.jspecdesigns.com/store/p/24sao1u8uocgovai8uypa2qczlyti6

We suggest making some sort of plug to fill the gap in the grip so the resin decal sits nice and flush.

18/04/2025

Early stages of design, these will be resin decals just like our n14 and n15 SSS. Anyone interested in a S-RV OEM replica badge for the front grill?

14/04/2025

Hi Everyone!! For those who have been asking for the N14 Pulsar ABS decal, we have them in our store available in 5 colours to choose from. Sold in pairs.

2 x ABS Decals This have been replicated from an N14 pulsar but might also suit other Nissan vehicles

26/03/2025

For those that have inquired about ABS decals for the N14, we are in the process of getting the decals made up. We are going to have 5 colours to start of with

Black
White
Burgundy
Metallic silver light
Metallic silver dark

Waiting on the sample colours for the metallics then we’ll get them made up.

Keep an eye out for updates

24/03/2025

For those wanting an affordable and hassle free fix to common oil spills, here we have a solution for all CA /SR / RB engines. Screw in type oil funnel. Available now online from the following link for $24.95

Oil funnel that screws into where the oil cap sits avoiding the common oil spills keeping your engine nice and clean.  Fits all SR’s: SR20DE, SR20VE, SR20DET, SR20VET RB’s: RB20, RB25, RB26, RB30

13/03/2025

We are excited to announce that our N14 Pulsar J*P SPEC SSS tow hook cover is now available from our website.

Here we have recreated the N14 Pulsar SSS J*P SPEC tow hook cover (not for gtir) in a ABS LIKE resin. We will have two options available. One prepped and painted in grey primer, and the other the same but painted with a bumper and trim paint.