All Street Panel

All Street Panel Please Private Message me regarding work 🏁

XT GT 15x10 Auto Drag with a 295x55 tyre 💪🏁The Following was conducted:• Radius Tubs• Flat Boot Floor• Custom Back Seat ...
08/02/2026

XT GT 15x10 Auto Drag with a 295x55 tyre 💪🏁

The Following was conducted:

• Radius Tubs
• Flat Boot Floor
• Custom Back Seat Panel
• Rear Half Chassis Rails
• Chassis Connectors
• Leaf Spring Relocation With Our Custom Front Mount and Rear Slider Boxes
• Custom Made Lower Quarter Panels to look Original
• Custom Fabricated Boot Stays To Match The Original Top Half
• Fuel Tank Frame
• Optima Battery Mount
• CDS Nine Inch With 35 Spline Moser Axles and Wilwood Rear Brakes

Our year that was, Wishing Everyone a Merry Christmas and a Happy New Year. Thank you to our loyal customers for your co...
24/12/2025

Our year that was, Wishing Everyone a Merry Christmas and a Happy New Year. Thank you to our loyal customers for your constant support and trust, bring on 2026 💪🏁

Some Progress Photos of the XT GT we have been working on 💪🏁The Following Rust Repairs Have Been Conducted So Far:• Inst...
21/12/2025

Some Progress Photos of the XT GT we have been working on 💪🏁

The Following Rust Repairs Have Been Conducted So Far:

• Install LH & RH Lower Quarter Panels
• Install Tops Of LH & RH Quarter Panels Around The Rear Window
• Rear Window Panel
• Lower Rear Window Panel support Brace
• Complete Rear Parcelshelf Set Up
• Upper and Lower Back Panel
• Install Inner and Outer LH & RH Sill Panel NOS
• Inner and Outer LH & RH Front Torque Boxes
• Inner and Outer LH & RH Rear of Front Chassis Rails
• Fabricate LH Front Floor Panel Section and Install
• Install LH & RH Seat Braces
• Inner and Outer LH & RH A Pillar sections
• Install LH Rear Door Skin NOS
• Modify Door Gaps
• LH Dog Leg Repair Section

HQ GTS Coupe in to accomodate the 15x10 Weld Pro Star with the 295x55 tyre 💪🏁The Following Was Conducted:• Radius Tubs• ...
30/11/2025

HQ GTS Coupe in to accomodate the 15x10 Weld Pro Star with the 295x55 tyre 💪🏁

The Following Was Conducted:

• Radius Tubs
• Notch and Re Build The Factory Chassis Rail
• Custom Tubular Top Trailing Arm Set Up
• Chassis Connectors
• Lower Trailing Arm Reinforcment Plates
• Front Inner and Outer Kidney Plates
• CDS braced nine inch diff with custom lower brackets, 35 Spline Moser axles and 11” wilwood disc brakes
• CDS Adjustable Upper and Lower Trailing Arms

Anthony’s Drag Challenge XW Ute We Assembled 💪🏁The Following Was Conducted:• Install Engine and Transmission• Fuel Syste...
21/09/2025

Anthony’s Drag Challenge XW Ute We Assembled 💪🏁
The Following Was Conducted:

• Install Engine and Transmission
• Fuel System to suit unleaded and a E85 Tank
• Custom Tailshaft Loop
• Cooling System
• Custom Centre Console
• Set up parachute leaver and cable set up
• Cage Roof Bars

HQ Pro Tourer Ute in to accomodate the 18x12 Simmons 💪🏁The Following was conducted:• Custom Crossmember • Custom Chassis...
04/08/2025

HQ Pro Tourer Ute in to accomodate the 18x12 Simmons 💪🏁

The Following was conducted:

• Custom Crossmember
• Custom Chassis Rails
• Our Custom Radial 4 Link Set Up
• Custom Watts Link
• CK Racing Developments Billet Shock Mounts
• Race Product 3.5inch Sheet Metal Housing With Their Upgraded 35 Spline Floaters Constructed By CDS Engineering
• 12 inch Wilwood Rear Brake Kit With Electronic Handbrake

XC Falcon in to accommodate the 15x12 with a 29x15 tyre 💪🏁The Following was conducted:• Rear Clip• Chassis Connectors• O...
01/06/2025

XC Falcon in to accommodate the 15x12 with a 29x15 tyre 💪🏁

The Following was conducted:

• Rear Clip
• Chassis Connectors
• Our Custom Radial 4 Link Set Up
• Radius Tubs
• Flat Boot Floor
• Raised Rear Floor For Muffler Clearance
• Wishbone Track Locator
• Gazzard Bros Anti Roll Bar
• CK Racing Developments Billet Shock Mount
• Viking Coil Over Shock Absorbers
• Custom Made Rear Seat Panel
• Rear Boot Roll Cage Tube Set Up For Removable
Roll Cage
• Gas Strut Boot Hinge Conversion
• Race Products Sheet Metal 9 inch With Their Upgraded 35 Spline Floater kit Constructed By CDS Engineering
• 11 inch Wilwood Rear Brake Kit With Electronic Handbrake

Super Stock VK in for a couple of upgrades• Removable Parachute Mount• Modify the diff housing to accomodate the new sho...
18/05/2025

Super Stock VK in for a couple of upgrades

• Removable Parachute Mount

• Modify the diff housing to accomodate the new shock absorbers to suit the radials

• Modify the fuel tank frame to suit the new fuel cell

• Install the new billet battery clamp

LX Torana in to accommodate a 15x8.5 with a 255x60 Tyre 💪🏁The Following was conducted:• Notch and Re Build The Factory C...
23/03/2025

LX Torana in to accommodate a 15x8.5 with a 255x60 Tyre 💪🏁

The Following was conducted:

• Notch and Re Build The Factory Chassis Rail
• Split and Modify The Factory Tub
• CDS Engineering 9 inch Housing with Radial 4 Link Brackets, adjustable upper and lower control arms and 31 Spline Strange Axles

HK Premier in to modify the Transmission Tunnel to suit T400
16/03/2025

HK Premier in to modify the Transmission Tunnel to suit T400

Address

Adelaide, SA

Website

Alerts

Be the first to know and let us send you an email when All Street Panel posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category