ITW Welding Middle East

Home
United Arab Emirates
Dubai
ITW Welding Middle East

Industry leader in solution-focused welding products in the Middle east and Caspian Region.

22/12/2025

This festive season, we came together to celebrate what truly matters, our people, our partners, and the relationships that unite us. Last week, we enjoyed a fun-filled Christmas party with our families and loved ones, sharing laughter, joy, and the spirit of togetherness that defines our ITW community.

To our valued employees, thank you for your dedication and passion throughout the year.
To our trusted partners and customers, thank you for your continued confidence, collaboration, and support.
As we celebrate the season of giving, we wish you and your families a Merry Christmas and a joyful, prosperous New Year. May the year ahead be filled with success, safety, and strong partnerships.

From all of us at ITW Welding Middle East

25/06/2025

Get full control of weld preheating right at the job site.

The Miller ArcReach® Heater lets welders work smarter with a lightweight 20 KG unit that can be placed up to 60 meters from the power source.
With a built-in programmer and temperature recorder, it ensures better heat control, consistent weld quality, and improved efficiency especially in demanding environments, work at height or in congested areas.

Minimize rework. Maximize safety. Optimize your workflow.

To learn more email us at [email protected] or visit https://lnkd.in/eFrRVBVj

12/06/2025

We recently conducted welding trials in Azerbaijan , showcasing a complete Miller-Hobart solution designed for productivity, quality, and repeatability in critical pipe welding applications.

-Process: Miller’s RMD® (Regulated Metal Deposition) was used for root pass welding on carbon steel pipes offering stable arc control, reduced spatter, and excellent tie-in, particularly advantageous for open-root applications.

-Filler Metal: Hobart Megafil® 710, a seamless metal-cored wire, delivers low hydrogen levels, high deposition rates, and excellent arc characteristics, supporting higher travel speeds and improved mechanical properties.

-Heat Control: Proheat™ induction heating was employed to precisely control interpass temperatures, ensuring thermal consistency, reducing residual stresses, and enhancing weld integrity while minimizing heating time and rework risk.

This integrated solution demonstrates how pairing advanced wire-fed welding processes with thermal control systems can significantly optimize weld quality and efficiency for pipeline, process piping, and offshore structural projects in the field.

For further inquiries and welding demo request , please send us an email at [email protected]

30/04/2025

Precision Metal-Cored Wire for High-Quality Piping Work

When it comes to piping and high-precision welding, every detail matters — and MEGAFIL® 710M is engineered to deliver exactly that.As a seamless metal-cored wire, MEGAFIL® 710M is manufactured through a rigorous and time-intensive process, involving gas-tight tubing and high-temperature annealing. This results in a wire that’s extremely resistant to moisture pickup, making it ideal for field use, offshore conditions, and harsh environments.

Why it’s trusted for piping and critical work:
- No need for 4-hour return-to-oven rules
- No baking or re-baking required- Easier consumable handling and logistics
- Improved weld quality with less downtime

Compared to solid wires:
- Higher deposition rates = faster productivity
- Smoother, more stable arc for clean welds
- Minimal spatter and excellent bead profile
- Consistent performance in automated or manual applications

MEGAFIL® 710M is not just a consumable—it’s a precision tool built to support welders in delivering reliable, repeatable results in the most demanding jobs.

Download the brochure for Megafil here: https://lnkd.in/dteHqpAd
For further inquiries, please email us at [email protected]

08/04/2025

April is National Welding Month!

This year’s theme — “Connected by Welding: Bridging Communities and Industries” — highlights the power of welding to unite people, projects, and progress.

At ITW Welding Middle East, we’re proud to support this initiative by empowering our welders with innovative technology, hands-on training, and a culture that values their craft. From infrastructure to innovation, our welders are at the heart of it all.

Let’s celebrate the skilled professionals who keep our world connected — one weld at a time.

04/04/2025

Heat can damage your welding generators in high temperature environments.
It is generally believed that extreme heat is detrimental to internal combustion engines. The unit may overheat, reduce the duty cycle, or even cause internal damage if the power output is derated on an engine-driven welder/generator.

With Miller’s welding generators:

✅ Engine cooling is optimized to reduce harmful environmental effects under high heat conditions.
✅ These units also feature thermal overload protection to prevent machine damage if the duty cycle is exceeded, the airflow is blocked, or the thermostat detects overheating.
✅ Big Blue welding generators are tested to operate in high-temperature climates, even at the highest recorded temperature on earth, 56.7°C.

Find out more about our heat-resistant products here :
https://lnkd.in/eaaBVBEB
and for further inquiries, please email us at [email protected]

28/03/2025

Strengthening Our Service Excellence!

We’re proud to welcome Ganesh Kumar Tiwari as our new Service Engineer for Middle East and Central Asia.

With 10+ years of experience in the welding industry and a degree in Electronics and Communication Engineering, Ganesh’s expertise will enhance our machine service for direct accounts, automation support, and technical troubleshooting.

His ability to work closely with customers and distributor technicians aligns perfectly with our commitment to delivering exceptional service and innovation.

Ganesh, welcome to the team! We’re excited about the impact you’ll make.

Meet the rest of our team here: https://lnkd.in/dn5Khtqg

24/02/2025

Weld with Four Arcs!

When it comes to pipeline maintenance and complex welding applications, the Miller Big Blue 800 Duo Pro features two independent pipe quality arcs and two standalone generators. This allows operators to work independently without interacting with the arc.

Big Blue 800 Duo Pro advantages:

1. Multiprocess Capabilities: this machine excels in Stick, MIG, Flux-Cored, and TIG welding, providing you versatility you need for any job.

2. Innovative Arc Reach Technology: Run advanced features like the Smart Feeder for RMD and Pro-Pulse while utilizing the second output for preheating.

3. Integrated Air Compressor: Perfect for on-site needs, essential for pipeline maintenance applications.

Transform your workflow with the Miller Big Blue 800 Duo Pro—where every weld counts! https://lnkd.in/dqyaCNhZ
For more information, email us at [email protected]

18/02/2025

The pipe and tank industry presents welders with unique challenges. From navigating tight spaces to ensuring perfect weld integrity on thick materials, precision, durability, and efficiency are in high demand. Factors like inconsistent weld quality, extended production times, and challenging field conditions compound the complexity of the work.
With innovative welding technologies designed to meet these challenges head-on, Miller provides reliable, cutting-edge solutions that ensure welders can work smarter, not harder.

Download our Pipe and Tank product selection guide here [https://me.itwwelding.com/wp-content/uploads/2024/03/Pipe-and-Tank-Product-Guide.pdf] to guide you through our comprehensive range of products tailored for the pipe and tank industry.

For further advice and product inquiries, email us at [email protected] or submit your queries here https://me.itwwelding.com/contact/

07/02/2025

A big thank you to Mohammad Maseeh Uddin for visiting us in Dubai!
It was a pleasure connecting and discussing the opportunities ahead.
We're thrilled to strengthen our partnership with Gulf Cryo and expand our presence in Kuwait and the wider Gulf region.
Looking forward to working closely together and achieving even greater success in the future!

31/01/2025

Key Team Addition and New Product Portfolio!

We are excited to welcome Alok Ambadkar , our new Technical Sales Manager for Orbitalum Tools GmbH, an ITW Welding company that leads globally in providing integrated solutions for precise orbital tube cutting, beveling, and orbital welding.

Alok has 14 years of experience in sales strategy, key account management, and business development. With plans to expand Orbitalum's network throughout the region, he will focus on Saudi Arabia and the UAE. We can now offer a wider range of solutions to the Middle East market by incorporating Orbitalum's cutting-edge technologies and products. We will be able to provide continued excellence and innovation across the industries we serve through these solutions

For any orbital cutting and welding inquiries, email him at [email protected]

Address

S3 A2SR10 Jebel Ali Free Zone
Dubai

Website

https://www.me.itwwelding.com/

Alerts

Be the first to know and let us send you an email when ITW Welding Middle East posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ITW Welding Middle East:

Shortcuts

Want your business to be the top-listed Equipment Service in Dubai?